Hi

From: KIYOHARA Takashi <kiyoh...@kk.iij4u.or.jp>
Date: Sun, 03 Jul 2016 20:05:06 +0900 (JST)

> Gumstix DuoVero (Crystal + Parlor) supports.  
> 
> https://store.gumstix.com/coms/duovero-coms.html

Commited.

ToDo
  TWL6030's ADC
  TWL6040
  DVI

Thanks,
--
kiyohara
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.39 (DUOVERO) #0: Fri Sep 30 14:43:28 UTC 2016
        ax@ubuntu:/mnt/NetBSD/src/sys/arch/evbarm/compile/DUOVERO
total memory = 1024 MB
avail memory = 1009 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 600 MHz Cortex-A9 r1p3 (Cortex V7A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB/32B 4-way L1 VIPT Instruction cache
cpu0: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 1024KB/32B 16-way write-back-locking-D L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpu1 at mainbus0 core 1
armperiph0 at mainbus0
arml2cc0 at armperiph0: ARM PL310 r2p0 L2 Cache Controller
armgic0 at armperiph0: Generic Interrupt Controller, 160 sources (149 valid)
armgic0: 16 Priorities, 128 SPIs, 5 PPIs, 16 SGIs
a9tmr0 at armperiph0: A9 Global 64-bit Timer (300 MHz)
a9tmr0: interrupting on irq 27
a9wdt0 at armperiph0: A9 Watchdog Timer, default period is 12 seconds
obio0 at mainbus0 base 0x4a000000-0x4affffff: On-Board IO
obio1 at mainbus0 base 0x4a300000-0x4a3fffff: On-Board IO
omapgpio0 at obio1 addr 0x4a310000-0x4a3103ff intr 61 intrbase 160: interrupts 
160..191, intr 61
gpio0 at omapgpio0: 32 pins
obio2 at mainbus0 base 0x48000000-0x48ffffff: On-Board IO
omapgpio1 at obio2 addr 0x48055000-0x480553ff intr 62 intrbase 192: interrupts 
192..223, intr 62
gpio1 at omapgpio1: 32 pins
omapgpio2 at obio2 addr 0x48057000-0x480573ff intr 63 intrbase 224: interrupts 
224..255, intr 63
gpio2 at omapgpio2: 32 pins
omapgpio3 at obio2 addr 0x48059000-0x480593ff intr 64 intrbase 256: interrupts 
256..287, intr 64
gpio3 at omapgpio3: 32 pins
gpiobutton0 at gpio3 pins 25: Power button
omapgpio4 at obio2 addr 0x4805b000-0x4805b3ff intr 65 intrbase 288: interrupts 
288..319, intr 65
gpio4 at omapgpio4: 32 pins
omapgpio5 at obio2 addr 0x4805d000-0x4805d3ff intr 66 intrbase 320: interrupts 
320..351, intr 66
gpio5 at omapgpio5: 32 pins
obio3 at mainbus0 base 0x49000000-0x49ffffff: On-Board IO
L3i0 at mainbus0: L3i Interconnect
gpmc0 at mainbus0 base 0x50000000: General Purpose Memory Controller, rev 6.0
gpmc0: CS#5 valid, addr 0x2c000000, size  16MB
smsh0 at gpmc0 addr 0x2c000000 intr 204: SMSC LAN9221 Rev 0
smsh0: MAC address 00:15:c9:29:00:14
ukphy0 at smsh0 phy 1: OUI 0x00800f, model 0x000c, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at obio0 addr 0x4a064800-0x4a064bff intr 108: USB Controller
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ehci0 at obio0 addr 0x4a064c00-0x4a064fff intr 109: OMAP USB controller
ehci0: EHCI version 1.0
ehci0: companion controller, 3 ports each: ohci0
usb1 at ehci0: USB revision 2.0
prcm0 at obio1 addr 0x4a306000-0x4a307fff: Power, Reset and Clock Management
com0 at obio2 addr 0x48020000-0x480203ff intr 106: OMAP UART, working fifo
com0: console
sdhc0 at obio2 addr 0x4809c000-0x4809cfff intr 115: SDHC controller
sdhc0: IP Rev 0x40202301, 1024 byte FIFO, max block length 1024 bytes
sdhc0: SDHC 2.0, rev 49, 32-bit ADMA2, 96000 kHz, HS 1.8V 3.0V, 1024 byte blocks
sdmmc0 at sdhc0 slot 0
tiiic0 at obio2 addr 0x48070000-0x480700ff intr 88: rev 0.10, scheme 1
LO 0xa, HI 0x5040
tiiic0: 16-bytes FIFO
iic0 at tiiic0: I2C bus
twl6030pm0 at iic0 addr 0x48: RTC
twl6030pm1 at iic0 addr 0x49
twl6030pm2 at iic0 addr 0x4a
tiiic1 at obio2 addr 0x48350000-0x483500ff intr 94: rev 0.10, scheme 1
LO 0xa, HI 0x5040
tiiic1: 16-bytes FIFO
iic1 at tiiic1: I2C bus
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "a9tmr0" frequency 300000000 Hz quality 500
cpu1: 600 MHz Cortex-A9 r1p3 (Cortex V7A core)
cpu1: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu1: 32KB/32B 4-way L1 VIPT Instruction cache
cpu1: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache
cpu1: 1024KB/32B 16-way write-back-locking-D L2 PIPT Unified cache
vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
uhub0 at usb0: OMAP OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: OMAP3 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
WARNING: module error: compat_netbsd32_sysvipc: can't find builtin dependency 
`sysv_ipc'
WARNING: module error: compat_netbsd32: can't find builtin dependency `sysv_ipc'
WARNING: module error: compat_netbsd32_mqueue: can't find builtin dependency 
`compat_netbsd32'
WARNING: module error: compat_linux: can't find builtin dependency `sysv_ipc'
ld0 at sdmmc0: <0x03:0x5344:SU08G:0x80:0x2173ef7c:0x0d6>
ld0: 7580 MB, 3850 cyl, 64 head, 63 sec, 512 bytes/sect x 15523840 sectors
ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
boot device: <unknown>
root device: ld0
dump device (default ld0b): 
file system (default generic): 
root on ld0a dumps on ld0b
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
kern.module.path=/stand/evbarm/7.99.39/modules
WARNING: clock lost 6114 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init path (default /sbin/init): 
init: copying out path `/sbin/init' 11

Reply via email to