Hi, Frank.
On 2016/10/24 14:56, Masanobu SAITOH wrote:
Hello.
On 2016/10/22 19:32, Frank Kardel wrote:
Hi !
There has be quite some work going on for wm interfaces.
When testing current kernels I found that some time after
if_wm.c:1.347 the WOL functionality has stopped working
on my ASRock 990FX Extreme 9 wm interfaces (PHYs are down
after "shutdown -p").
Compiling if_wm.c with "options WM_WOL" leads to
compilations errors (defined, but not used).
So currently I gather that WOL on wm is work in
progress - am I right ?
Yes, It's work in progress...
dmesg snipplets:
wm0 at pci6 dev 0 function 0: Intel i82572EI 1000baseT Ethernet (rev. 0x06)
wm0: interrupting at ioapic1 pin 23
wm0: PCI-Express bus
wm0: 2048 words (16 address bits) SPI EEPROM, version 5.11.8, Image Unique ID
0000ffff
wm0: Ethernet address 00:1b:21:xx:yy:zz
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
wm1 at pci13 dev 0 function 0: Intel i82583V (rev. 0x00)
wm1: interrupting at ioapic0 pin 18
wm1: PCI-Express bus
wm1: 2048 words FLASH, version 1.10.0, Image Unique ID 0000ffff
wm1: Ethernet address bc:5f:f4:xx:yy:zz
makphy0 at wm1 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
Frank
Could you test with if_wm.c rev. 1.439?
If it doesn't wakeup with WOL packet, could you show me the
output of the following code in wm_get_wakeup()?
#ifdef WM_DEBUG
printf("\n");
if ((sc->sc_flags & WM_F_HAS_AMT) != 0)
printf("HAS_AMT,");
if ((sc->sc_flags & WM_F_ARC_SUBSYS_VALID) != 0)
printf("ARC_SUBSYS_VALID,");
if ((sc->sc_flags & WM_F_ASF_FIRMWARE_PRES) != 0)
printf("ASF_FIRMWARE_PRES,");
if ((sc->sc_flags & WM_F_HAS_MANAGE) != 0)
printf("HAS_MANAGE,");
printf("\n");
#endif
Regards.
--
-----------------------------------------------
SAITOH Masanobu ([email protected]
[email protected])
