Hi, Thanks for your build.sh -m evbearmv6hf-el release fix.
I have written rpi.img to SD Card and boot it on Raspberry Pi Model B Revision 2.0 (RAM: 512MB). And I do not see any green boot message in HDMI display. Older non-FDTised rpi.img boots properly on same setting. Do I need to modify config.txt or cmdline.txt? I have no changes in config.txt and cmdline.txt. Thank you. From: Nick Hudson <[email protected]>, Date: Sun, 10 Dec 2017 21:38:55 +0000 > Today I've committed a bunch of changes to convert the BCM283[567] > support in > > sys/arch/arm/broadcom to use FDT[*]. It's not perfect, but its a good > step in the right > > direction. > > > To the user there should be very little difference apart from > > - the kernel is now built as netbsd.img (and not netbsd.bin) in the > - kernel compile objdir. > > - the *.dtb files from the kernel objdir need to be on the fat > - filesystem > > - support for dtb overlays should work[**] > > > The images evbearmv6hf/rpi.img and evbearmv7hf/armv7.img have been > tested on rpi1 model b, rpi2 and rpi3. > > > Nick > > > [*] > https://github.com/devicetree-org/devicetree-specification-released/blob/master/devicetree-specification-v0.1-20160524.pdf > > [**] > https://www.raspberrypi.org/documentation/configuration/device-tree.md > -- Ryo ONODERA // [email protected] PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB FD1B F404 27FA C7D1 15F3
