Yesterday I tried booting an amd64 install iso from sources updated around 16:00 UTC under virtualbox 6.0.6. The kernel paniced with panic: audio_indexof_format: cannot find matched format
The VM was configured with 1GB of RAM, 5GB of disk. ICH9 chipset and ICH AC97 audio. Host is a macbook pro running up-to-date macOS. The kernel messages via serial console are attached. Anything I can do to help debug this? --chris
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.39 (GENERIC) #0: Thu May 9 20:42:44 CEST 2019 [ 1.0000000] [email protected]:/Users/bad/work/rump-current/src-cvs/obj/obj.amd64/sys/arch/amd64/compile/GENERIC [ 1.0000000] total memory = 1023 MB [ 1.0000000] avail memory = 966 MB [ 1.0000000] WARNING: module error: module `cd9660' pushed by boot loader already exists [ 1.0000000] cpu_rng: RDRAND [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000030] mainbus0 (root) [ 1.0000030] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX ) [ 1.0000030] ACPI: XSDT 0x000000003FFF0040 00004C (v01 VBOX VBOXXSDT 00000001 ASL 00000061) [ 1.0000030] ACPI: FACP 0x000000003FFF0110 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061) [ 1.0000030] ACPI: DSDT 0x000000003FFF0530 0022EA (v02 VBOX VBOXBIOS 00000002 INTL 20100528) [ 1.0000030] ACPI: FACS 0x000000003FFF0240 000040 [ 1.0000030] ACPI: APIC 0x000000003FFF0280 000054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061) [ 1.0000030] ACPI: HPET 0x000000003FFF02E0 000038 (v01 VBOX VBOXHPET 00000001 ASL 00000061) [ 1.0000030] ACPI: MCFG 0x000000003FFF0320 00003C (v01 VBOX VBOXMCFG 00000001 ASL 00000061) [ 1.0000030] ACPI: SSDT 0x000000003FFF0360 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528) [ 1.0000030] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.0000030] ioapic0 at mainbus0 apid 1 [ 1.0000030] cpu0 at mainbus0 apid 0 [ 1.0000030] cpu0: Intel(R) Core(TM) i7-4578U CPU @ 3.00GHz, id 0x40651 [ 1.0000030] cpu0: package 0, core 0, smt 0 [ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20190405 [ 1.0000030] acpi0: fixed power button present [ 1.0000030] acpi0: fixed sleep button present [ 1.0061613] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.0146367] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.0146367] pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12 [ 1.0146367] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 [ 1.0146367] PCIE (PNP0C02) at acpi0 not configured [ 1.0146367] SRL0 (PNP0501) at acpi0 not configured [ 1.0146367] acpivga0 at acpi0 (GFX0): ACPI Display Adapter [ 1.0146367] acpiout0 at acpivga0 (VGA, 0x0100): ACPI Display Output Device [ 1.0146367] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery [ 1.0146367] acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter [ 1.0146367] ACPI: Enabled 2 GPEs in block 00 to 07 [ 1.0146367] pckbd0 at pckbc1 (kbd slot) [ 1.0146367] pckbc1: using irq 1 for kbd slot [ 1.0146367] wskbd0 at pckbd0 mux 1 [ 1.0146367] pms0 at pckbc1 (aux slot) [ 1.0146367] pckbc1: using irq 12 for aux slot [ 1.0146367] wsmouse0 at pms0 mux 0 [ 1.0146367] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0146367] vga0 at pci0 dev 2 function 0: vendor 80ee product beef (rev. 0x00) [ 1.0146367] wsdisplay0 at vga0 kbdmux 1 [ 1.0146367] drm at vga0 not configured [ 1.0146367] wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x02) [ 1.0146367] wm0: interrupting at ioapic0 pin 19 [ 1.0146367] wm0: Ethernet address 08:00:27:0f:98:42 [ 1.0146367] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4 [ 1.0146367] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0146367] vendor 80ee product cafe (miscellaneous system) at pci0 dev 4 function 0 not configured [ 1.0146367] auich0 at pci0 dev 5 function 0: i82801AA (ICH) AC-97 Audio [ 1.0146367] auich0: interrupting at ioapic0 pin 21 [ 1.0146367] auich0: ac97: SigmaTel STAC9700 codec; no 3D stereo [ 1.0146367] auich0: ac97: ext id 0x800<AC97_23> [ 1.0146367] piixpm0 at pci0 dev 7 function 0: vendor 8086 product 7113 (rev. 0x08) [ 1.0146367] piixpm0: interrupting at ioapic0 pin 23 [ 1.0146367] iic0 at piixpm0: I2C bus [ 1.0146367] ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27b9 (rev. 0x02) [ 1.0146367] ichlpcib0: 24-bit timer [ 1.0146367] tco0 at ichlpcib0: TCO (watchdog) timer configured. [ 1.0146367] ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2829 (rev. 0x02) [ 1.0146367] ahcisata0: AHCI revision 1.10, 2 ports, 32 slots, CAP 0xc8241f81<CCCS,SAM,ISS=0x2=Gen2,SSS,SNCQ,S64A> [ 1.0146367] ahcisata0: interrupting at ioapic0 pin 23 [ 1.0146367] atabus0 at ahcisata0 channel 0 [ 1.0146367] atabus1 at ahcisata0 channel 1 [ 1.0146367] ohci0 at pci0 dev 31 function 4: vendor 106b product 003f (rev. 0x00) [ 1.0146367] ohci0: interrupting at ioapic0 pin 23 [ 1.0146367] ohci0: OHCI version 1.0 [ 1.0146367] usb0 at ohci0: USB revision 1.0 [ 1.0146367] ehci0 at pci0 dev 31 function 5: vendor 8086 product 265c (rev. 0x00) [ 1.0146367] ehci0: interrupting at ioapic0 pin 23 [ 1.0146367] usb1 at ehci0: USB revision 2.0 [ 1.0146367] isa0 at ichlpcib0 [ 1.0146367] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.0146367] com0: console [ 1.0146367] pcppi0 at isa0 port 0x61 [ 1.0146367] spkr0 at pcppi0: PC Speaker [ 1.0146367] wsbell at spkr0 not configured [ 1.0146367] midi0 at pcppi0: PC speaker [ 1.0146367] sysbeep0 at pcppi0 [ 1.0146367] attimer1: attached to pcppi0 [ 1.0146367] acpicpu0 at cpu0: ACPI CPU [ 1.8264124] acpiacad0: AC adapter online. [ 1.8264124] acpibat0: innotek VBOX rechargeable battery [ 1.8264124] audio0 at auich0: full duplex, playback, capture, mmap, independent [ 1.8376826] panic: audio_indexof_format: cannot find matched format [ 1.8466664] cpu0: Begin traceback... [ 1.8466664] vpanic() at netbsd:vpanic+0x160 [ 1.8570985] snprintf() at netbsd:snprintf [ 1.8570985] audio_diagnostic_format2() at netbsd:audio_diagnostic_format2 [ 1.8685949] auich_set_format() at netbsd:auich_set_format+0x5d [ 1.8685949] audio_hw_set_format() at netbsd:audio_hw_set_format+0xb2 [ 1.8770981] audioattach() at netbsd:audioattach+0x521 [ 1.8770981] config_attach_loc() at netbsd:config_attach_loc+0x1a5 [ 1.8895393] config_found_sm_loc() at netbsd:config_found_sm_loc+0x48 [ 1.8979084] audio_attach_mi() at netbsd:audio_attach_mi+0x32 [ 1.9065508] auich_finish_attach() at netbsd:auich_finish_attach+0x67 [ 1.9065508] config_interrupts_thread() at netbsd:config_interrupts_thread+0x9f [ 1.9177051] cpu0: End traceback... [ 1.9177051] fatal breakpoint trap in supervisor mode [ 1.9177051] trap type 1 code 0 rip 0xffffffff8021de4d cs 0x8 rflags 0x202 cr2 0 ilevel 0 rsp 0xffffa380328c8900 [ 1.9350192] curlwp 0xfffffba74e6b2140 pid 0.26 lowest kstack 0xffffa380328c52c0 Stopped in pid 0.26 (system) at netbsd:breakpoint+0x5: leave db{0}> set set Unknown variable db{0}> reboot 808 reboot 808 acpi0: entering state S5 total-internal-reflection:rump-current bad$ exit Script done on Thu May 9 23:25:56 2019
