Hi, Martin Husemann wrote: >> I launch X11. A cursor appears, evberything else is black. >> Computer resets. >> Fun. > Give us some details ;-) > > I updated a machine today and it does not do that - most likely this is > graphics card/driver related.
Oh, my tree is of yesterday, because it takes so much time to build kernel + userland and i kept it "coherent". A first detail is that it crashed with the new kernel and the old userland (as I noted) but I checed. Then, below, my dmesg. the kern drm errors have always been there, never fully fixed, but things worked nevertheless. Console is working in high-res. I can also have the netbsd/netbsd.core file but they are big, so I won't post them on the list, but send them privately if requested. Riccardo [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.99.49 (HP620) #4: Wed Mar 11 20:21:04 CET 2020 [ 1.000000] multix@disc:/usr/obj/sys/arch/amd64/compile/HP620 [ 1.000000] total memory = 3996 MB [ 1.000000] avail memory = 3853 MB [ 1.000000] pool redzone disabled for 'buf4k' [ 1.000000] pool redzone disabled for 'buf64k' [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.000000] RTC BIOS diagnostic error 0xef<clock_battery,ROM_cksum,config_unit,fixed_disk,invalid_time> [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] Hewlett-Packard HP 620 (F.08) [ 1.000003] mainbus0 (root) [ 1.000003] ACPI: RSDP 0x00000000000F6970 000024 (v02 HPQOEM) [ 1.000003] ACPI: XSDT 0x00000000B9FFE120 000074 (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 1.000003] ACPI: FACP 0x00000000B9FFC000 0000F4 (v03 HPQOEM 1526 0000000F HP 00000001) [ 1.000003] ACPI: DSDT 0x00000000B9FDB000 01B62B (v01 HPQOEM 1526 00000001 INTL 20060912) [ 1.000003] ACPI: FACS 0x00000000B9FAD000 000040 [ 1.000003] ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM 1526 00000001 HP 00000001) [ 1.000003] ACPI: APIC 0x00000000B9FFA000 000084 (v01 HPQOEM 1526 00000001 HP 00000001) [ 1.000003] ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM 1526 00000001 HP 00000001) [ 1.000003] ACPI: ASF! 0x00000000B9FF8000 0000A0 (v32 HPQOEM 1526 00000001 HP 00000001) [ 1.000003] ACPI: SSDT 0x00000000B9FD8000 0002DD (v01 HPQOEM SataAhci 00001000 INTL 20060912) [ 1.000003] ACPI: SLIC 0x00000000B9FD6000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 1.000003] ACPI: SSDT 0x00000000B9FD5000 00066C (v01 PmRef CpuPm 00003000 INTL 20060912) [ 1.000003] ACPI: SSDT 0x00000000B9FD4000 000288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) [ 1.000003] ACPI: SSDT 0x00000000B9FD3000 000225 (v01 PmRef ApTst 00003000 INTL 20060912) [ 1.000003] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 1.000003] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins [ 1.000003] cpu0 at mainbus0 apid 0 [ 1.000003] cpu0: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz, id 0x1067a [ 1.000003] cpu0: node 0, package 0, core 0, smt 0 [ 1.000003] cpu1 at mainbus0 apid 1 [ 1.000003] cpu1: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz, id 0x1067a [ 1.000003] cpu1: node 0, package 0, core 1, smt 0 [ 1.000003] acpi0 at mainbus0: Intel ACPICA 20191213 [ 1.000003] acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,0000000f>, AslId < ,01000013> [ 1.000003] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 [ 1.000003] ACPI: Dynamic OEM Table Load: [ 1.000003] ACPI: SSDT 0xFFFFE54B5E8CB748 000275 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 1.000003] ACPI: Dynamic OEM Table Load: [ 1.000003] ACPI: SSDT 0xFFFFE54B5E91A448 00057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 1.000003] ACPI: Dynamic OEM Table Load: [ 1.000003] ACPI: SSDT 0xFFFFE54B5E917288 0001D7 (v01 PmRef ApIst 00003000 INTL 20060912) [ 1.000003] ACPI: Dynamic OEM Table Load: [ 1.000003] ACPI: SSDT 0xFFFFE54B5E976908 00008D (v01 PmRef ApCst 00003000 INTL 20060912) [ 1.000003] acpi0: SCI interrupting at int 9 [ 1.000003] acpi0: fixed power button present [ 1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [ 1.039823] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.039823] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [ 1.040029] acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66 [ 1.040029] PDRC (PNP0C02) at acpi0 not configured [ 1.040029] acpivga0 at acpi0 (GFX0): ACPI Display Adapter [ 1.040029] acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device [ 1.040029] acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device [ 1.040029] acpiout1: brightness levels: [0,5,10,15,20,25,30,33,36,40,43,46,50,55,60,65,70,75,80,83,86,90,93,96,100] [ 1.040029] acpiout2 at acpivga0 (DD03, 0x0200): ACPI Display Output Device [ 1.040029] acpiout3 at acpivga0 (DD04, 0x0300): ACPI Display Output Device [ 1.040029] acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device [ 1.040029] acpivga0: autoconfiguration error: unknown output device acpiout0 [ 1.040029] acpivga0: autoconfiguration error: unknown output device acpiout2 [ 1.040029] acpivga0: autoconfiguration error: unknown output device acpiout3 [ 1.040029] acpivga0: autoconfiguration error: unknown output device acpiout4 [ 1.040029] acpivga0: connected output devices: [ 1.040029] acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0 [ 1.040029] FWHD (INT0800) at acpi0 not configured [ 1.040029] HTAM (PNP0C02) at acpi0 not configured [ 1.040029] LDRC (PNP0C02) at acpi0 not configured [ 1.040029] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 [ 1.040029] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.040029] pckbc2 at acpi0 (PS2M, SYN0176) (aux port): irq 12 [ 1.040029] acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery [ 1.040029] acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter [ 1.040029] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [ 1.040029] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch [ 1.040029] acpidalb0 at acpi0 (HST1, PNP0C32-1): Direct Application Launch Button [ 1.040029] acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface [ 1.040029] wmihp0 at acpiwmi0: HP WMI mappings [ 1.040029] acpifan0 at acpi0 (FAN6, PNP0C0B-6): ACPI Fan [ 1.040029] acpifan1 at acpi0 (FAN7, PNP0C0B-7): ACPI Fan [ 1.040029] acpifan2 at acpi0 (FAN8, PNP0C0B-8): ACPI Fan [ 1.040029] acpifan3 at acpi0 (FAN9, PNP0C0B-9): ACPI Fan [ 1.040029] acpifan4 at acpi0 (FANA, PNP0C0B-10): ACPI Fan [ 1.040029] acpifan5 at acpi0 (FANB, PNP0C0B-11): ACPI Fan [ 1.040029] acpifan6 at acpi0 (FANG, PNP0C0B-12): ACPI Fan [ 1.040029] acpitz0 at acpi0 (GFXZ) [ 1.040029] acpitz0: active cooling level 0: 105.0C [ 1.040029] acpitz0: active cooling level 1: 96.0C [ 1.040029] acpitz0: active cooling level 2: 87.0C [ 1.040029] acpitz0: active cooling level 3: 79.0C [ 1.040029] acpitz0: active cooling level 4: 71.0C [ 1.040029] acpitz0: active cooling level 5: 63.0C [ 1.040029] acpitz0: active cooling level 6: 56.0C [ 1.040029] acpitz0: levels: critical 108.0 C [ 1.040029] acpifan7 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan [ 1.040029] acpifan8 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan [ 1.040029] acpifan9 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan [ 1.040029] acpifan10 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan [ 1.040029] acpifan11 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan [ 1.040029] acpifan12 at acpi0 (FAN5, PNP0C0B-5): ACPI Fan [ 1.040029] acpitz1 at acpi0 (DTSZ) [ 1.040029] acpitz1: levels: critical 105.0 C, passive cooling [ 1.040029] acpitz2 at acpi0 (CPUZ): cpu0 cpu1 [ 1.040029] acpitz2: active cooling level 0: 84.0C [ 1.040029] acpitz2: active cooling level 1: 74.0C [ 1.040029] acpitz2: active cooling level 2: 62.0C [ 1.040029] acpitz2: active cooling level 3: 52.0C [ 1.040029] acpitz2: active cooling level 4: 44.0C [ 1.040029] acpitz2: active cooling level 5: 37.0C [ 1.040029] acpitz2: levels: critical 108.0 C, passive 105.0 C [ 1.040029] acpitz3 at acpi0 (SKNZ): cpu0 cpu1 [ 1.040029] acpitz3: levels: critical 105.0 C, passive 95.0 C, passive cooling [ 1.040029] acpitz4 at acpi0 (BATZ): cpu0 cpu1 [ 1.040029] acpitz4: levels: critical 108.0 C, passive 60.0 C, passive cooling [ 1.040029] acpitz5 at acpi0 (FDTZ) [ 1.040029] acpitz5: levels: critical 110.0 C, passive cooling [ 1.040029] ACPI: Enabled 6 GPEs in block 00 to 3F [ 1.040029] pckbd0 at pckbc1 (kbd slot) [ 1.040029] pckbc1: using irq 1 for kbd slot [ 1.040029] wskbd0 at pckbd0: console keyboard [ 1.040029] pms0 at pckbc1 (aux slot) [ 1.040029] pms0: Synaptics touchpad version 7.4 [ 1.040029] pms0: Extended W mode, Palm detect, Multi-finger Report [ 1.040029] pckbc1: using irq 12 for aux slot [ 1.040029] wsmouse0 at pms0 mux 0 [ 1.040029] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.040029] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.040029] pchb0 at pci0 dev 0 function 0: Intel 82GM45 Host Bridge (rev. 0x07) [ 1.040029] agp0 at pchb0: G4X-family chipset [ 1.040029] agp0: detected 65020k stolen memory [ 1.040029] agp0: aperture at 0xc0000000, size 0x10000000 [ 1.040029] i915drmkms0 at pci0 dev 2 function 0: Intel 82GM45 Integrated Graphics Device (rev. 0x07) [ 1.040029] Intel 82GM45 Integrated Graphics Device (miscellaneous display, revision 0x07) at pci0 dev 2 function 1 not configured [ 1.040029] uhci0 at pci0 dev 26 function 0: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.040029] uhci0: interrupting at ioapic0 pin 16 [ 1.040029] usb0 at uhci0: USB revision 1.0 [ 1.040029] uhci1 at pci0 dev 26 function 1: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.040029] uhci1: interrupting at ioapic0 pin 17 [ 1.040029] usb1 at uhci1: USB revision 1.0 [ 1.040029] uhci2 at pci0 dev 26 function 2: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.040029] uhci2: interrupting at ioapic0 pin 18 [ 1.040029] usb2 at uhci2: USB revision 1.0 [ 1.040029] ehci0 at pci0 dev 26 function 7: Intel 82801I USB EHCI Controller (rev. 0x03) [ 1.040029] ehci0: interrupting at ioapic0 pin 19 [ 1.040029] ehci0: EHCI version 1.0 [ 1.040029] ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2 [ 1.040029] usb3 at ehci0: USB revision 2.0 [ 1.040029] hdaudio0 at pci0 dev 27 function 0: HD Audio Controller [ 1.040029] hdaudio0: interrupting at msi0 vec 0 [ 1.040029] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit [ 1.040029] hdafg0 at hdaudio0: vendor 111d product 7666 [ 1.040029] hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack] [ 1.040029] hdafg0: ADC01 2ch: Mic In [Jack] [ 1.040029] hdafg0: ADC02 2ch: Mic In [Built-In] [ 1.040029] hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 [ 1.040029] audio0 at hdafg0: playback, capture, full duplex, independent [ 1.040029] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for playback [ 1.040029] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording [ 1.040029] spkr0 at audio0: PC Speaker (synthesized) [ 1.040029] wsbell at spkr0 not configured [ 1.040029] hdafg1 at hdaudio0: vendor 8086 product 2802 [ 1.040029] hdafg1: HDMI00 8ch: Digital Out [Jack] [ 1.040029] hdafg1: 8ch/0ch 48000Hz PCM16* [ 1.040029] ppb0 at pci0 dev 28 function 0: Intel 82801I PCI Express Port #1 (rev. 0x03) [ 1.040029] ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.040029] pci1 at ppb0 bus 1 [ 1.040029] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.040029] ppb1 at pci0 dev 28 function 1: Intel 82801I PCI Express Port #2 (rev. 0x03) [ 1.040029] ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.040029] pci2 at ppb1 bus 2 [ 1.040029] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.040029] ral0 at pci2 dev 0 function 0: Ralink Technologies RT3090 802.11b/g/n (rev. 0x00) [ 1.040029] ral0: interrupting at ioapic0 pin 17 [ 1.040029] ral0: 802.11 address e0:2a:82:5d:49:2c [ 1.040029] ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R) [ 1.040029] ppb2 at pci0 dev 28 function 2: Intel 82801I PCI Express Port #3 (rev. 0x03) [ 1.040029] ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.040029] pci3 at ppb2 bus 3 [ 1.040029] pci3: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.040029] ppb3 at pci0 dev 28 function 4: Intel 82801I PCI Express Port #5 (rev. 0x03) [ 1.040029] ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.040029] pci4 at ppb3 bus 68 [ 1.040029] pci4: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.040029] ppb4 at pci0 dev 28 function 5: Intel 82801I PCI Express Port #6 (rev. 0x03) [ 1.040029] ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s [ 1.040029] pci5 at ppb4 bus 133 [ 1.040029] pci5: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.040029] re0 at pci5 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x02) [ 1.040029] re0: interrupting at msix1 vec 0 [ 1.040029] re0: Ethernet address 64:31:50:7b:8f:55 [ 1.040029] re0: using 256 tx descriptors [ 1.040029] rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1 [ 1.040029] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.040029] uhci3 at pci0 dev 29 function 0: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.040029] uhci3: interrupting at ioapic0 pin 20 [ 1.040029] usb4 at uhci3: USB revision 1.0 [ 1.040029] uhci4 at pci0 dev 29 function 1: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.040029] uhci4: interrupting at ioapic0 pin 22 [ 1.040029] usb5 at uhci4: USB revision 1.0 [ 1.040029] uhci5 at pci0 dev 29 function 2: Intel 82801I USB UHCI Controller (rev. 0x03) [ 1.040029] uhci5: interrupting at ioapic0 pin 18 [ 1.040029] usb6 at uhci5: USB revision 1.0 [ 1.040029] ehci1 at pci0 dev 29 function 7: Intel 82801I USB EHCI Controller (rev. 0x03) [ 1.040029] ehci1: interrupting at ioapic0 pin 20 [ 1.040029] ehci1: EHCI version 1.0 [ 1.040029] ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5 [ 1.040029] usb7 at ehci1: USB revision 2.0 [ 1.040029] ppb5 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x93) [ 1.040029] pci6 at ppb5 bus 134 [ 1.040029] pci6: i/o space, memory space enabled [ 1.040029] ichlpcib0 at pci0 dev 31 function 0: Intel 82801IM LPC Interface Bridge (rev. 0x03) [ 1.040029] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 [ 1.040029] ichlpcib0: 24-bit timer [ 1.040029] tco0 at ichlpcib0: TCO (watchdog) timer configured. [ 1.040029] tco0: Min/Max interval 1/367 seconds [ 1.040029] ahcisata0 at pci0 dev 31 function 2: Intel 82801I Mobile AHCI SATA Controller with 4 ports (rev. 0x03) [ 1.040029] ahcisata0: 64-bit DMA [ 1.040029] ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xef20ffc3<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A> [ 1.040029] ahcisata0: interrupting at msi2 vec 0 [ 1.040029] atabus0 at ahcisata0 channel 0 [ 1.040029] atabus1 at ahcisata0 channel 1 [ 1.040029] atabus2 at ahcisata0 channel 5 [ 1.040029] isa0 at ichlpcib0 [ 1.040029] pcppi0 at isa0 port 0x61 [ 1.040029] spkr1 at pcppi0: PC Speaker [ 1.040029] wsbell at spkr1 not configured [ 1.040029] midi0 at pcppi0: PC speaker [ 1.040029] sysbeep0 at pcppi0 [ 1.040029] attimer1: attached to pcppi0 [ 1.040029] acpicpu0 at cpu0: ACPI CPU [ 1.040029] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [ 1.040029] acpicpu0: C2: FFH, lat 57 us, pow 100 mW [ 1.040029] acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2201 MHz, turbo boost [ 1.040029] acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2200 MHz [ 1.040029] acpicpu0: P2: FFH, lat 10 us, pow 23000 mW, 1600 MHz [ 1.040029] acpicpu0: P3: FFH, lat 10 us, pow 15000 mW, 1200 MHz [ 1.040029] acpicpu0: T0: FFH, lat 1 us, pow 15000 mW, 100 % [ 1.040029] acpicpu0: T1: FFH, lat 1 us, pow 13125 mW, 88 % [ 1.040029] acpicpu0: T2: FFH, lat 1 us, pow 11250 mW, 75 % [ 1.040029] acpicpu0: T3: FFH, lat 1 us, pow 9375 mW, 63 % [ 1.040029] acpicpu0: T4: FFH, lat 1 us, pow 7500 mW, 50 % [ 1.040029] acpicpu0: T5: FFH, lat 1 us, pow 5625 mW, 38 % [ 1.040029] acpicpu0: T6: FFH, lat 1 us, pow 3750 mW, 25 % [ 1.040029] acpicpu0: T7: FFH, lat 1 us, pow 1875 mW, 13 % [ 1.040029] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100 [ 1.040029] acpicpu1 at cpu1: ACPI CPU [ 1.040029] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100 [ 1.040029] cpu0 has 1 core siblings: cpu0 [ 1.040029] cpu0 has 2 pkg siblings: cpu1 cpu0 [ 1.040029] cpu0 has 1 1st siblings: cpu0 [ 1.040029] cpu0 first in package: cpu0 [ 1.040029] cpu1 has 1 core siblings: cpu1 [ 1.040029] cpu1 has 2 pkg siblings: cpu0 cpu1 [ 1.040029] cpu1 has 1 1st siblings: cpu0 [ 1.040029] cpu1 first in package: cpu0 [ 1.040029] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.725895] IPsec: Initialized Security Association Processing. [ 1.735899] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.735899] uhub0: 2 ports with 2 removable, self powered [ 1.735899] acpiacad0: AC adapter online. [ 1.735899] uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.735899] uhub1: 2 ports with 2 removable, self powered [ 1.735899] uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.735899] uhub2: 2 ports with 2 removable, self powered [ 1.735899] uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.735899] uhub3: 6 ports with 6 removable, self powered [ 1.735899] uhub4 at usb4: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.735899] uhub4: 2 ports with 2 removable, self powered [ 1.735899] uhub5 at usb5: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.735899] uhub5: 2 ports with 2 removable, self powered [ 1.755912] acpibat0: Hewlett-Packard LIon rechargeable battery [ 1.755912] acpibat0: granularity: low->warn 0.100 Ah, warn->full 0.100 Ah [ 1.805941] uhub6 at usb6: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.805941] uhub6: 2 ports with 2 removable, self powered [ 1.805941] uhub7 at usb7: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.805941] uhub7: 6 ports with 6 removable, self powered [ 1.815948] ahcisata0 port 1: device present, speed: 1.5Gb/s [ 1.815948] ahcisata0 port 0: device present, speed: 3.0Gb/s [ 3.046691] ehci0: handing over full speed device on port 3 to uhci1 [ 3.346872] wd0 at atabus0 drive 0 [ 3.346872] wd0: <SAMSUNG HM321HI> [ 3.346872] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.346872] wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors [ 3.416914] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) [ 3.416914] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [ 3.416914] atapibus0 at atabus1: 1 targets [ 3.426921] cd0 at atapibus0 drive 0: <hp DVDRAM GT30L, KW8ACJN2906, mP04> cdrom removable [ 3.436926] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 3.436926] cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) [ 5.107931] ubt0 at uhub1 port 1 [ 5.107931] ubt0: vendor 148f (0x148f) product 1000 (0x1000), rev 2.00/52.76, addr 2 [ 5.818359] uvideo0 at uhub3 port 5 configuration 1 interface 0: Foxlink (0x5c8) HP Webcam [2 MP Fixed] (0x403), rev 2.00/1.06, addr 2 [ 5.838371] video0 at uvideo0pool redzone disabled for 'video' [ 5.838371] : Foxlink (0x5c8) HP Webcam [2 MP Fixed] (0x403), rev 2.00/1.06, addr 2 [ 5.838371] WARNING: 4 errors while detecting hardware; check system log. [ 5.838371] boot device: wd0 [ 5.838371] root on wd0a dumps on wd0b [ 5.838371] dump_misc_init: max_paddr = 0x140000000 [ 5.838371] mountroot: trying lfs... [ 5.868389] mountroot: trying ffs... [ 5.878395] root file system type: ffs [ 5.878395] kern.module.path=/stand/amd64/9.99.49/modules [ 5.878395] kern info: [drm] Memory usable by graphics device = 512M [ 5.888507] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.888507] kern info: [drm] Driver supports precise vblank timestamp query. [ 5.888507] i915drmkms0: interrupting at msi3 vec 0 (i915drmkms0) [ 6.318660] warning: /usr/src/sys/external/bsd/drm2/dist/drm/drm_irq.c:1500: vblank wait timed out on crtc 0 [ 6.378696] kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:363)intel_cpu_fifo_underrun_irq_handler] *ERROR* CPU pipe A FIFO underrun [ 6.478756] warning: /usr/src/sys/external/bsd/drm2/dist/drm/drm_irq.c:1500: vblank wait timed out on crtc 0 [ 6.578817] warning: /usr/src/sys/external/bsd/drm2/dist/drm/drm_irq.c:1500: vblank wait timed out on crtc 0 [ 6.628848] intelfb0 at i915drmkms0 [ 6.628848] intelfb0: framebuffer at 0xffffc38076ec0000, size 1366x768, depth 32, stride 5504 [ 7.629451] wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [ 7.629451] wsmux1: connecting to wsdisplay0 [ 7.659467] init: copying out path `/sbin/init' 11 [ 9.490572] re0: link state DOWN (was UNKNOWN) [ 15.073929] wsdisplay0: screen 1 added (default, vt100 emulation) [ 15.073929] wsdisplay0: screen 2 added (default, vt100 emulation) [ 15.073929] wsdisplay0: screen 3 added (default, vt100 emulation) [ 15.083937] wsdisplay0: screen 4 added (default, vt100 emulation) [ 16.714917] kern error: [drm:(/usr/src/sys/external/bsd/drm2/dist/drm/i915/intel_fifo_underrun.c:363)intel_cpu_fifo_underrun_irq_handler] *ERROR* CPU pipe A FIFO underrun [ 63.633150] ral0: link state UP (was UNKNOWN) [ 503.367769] ral0: link state DOWN (was UP) [ 510.081809] ral0: link state UP (was DOWN) [ 863.374410] ral0: link state DOWN (was UP) [ 872.479889] ral0: link state UP (was DOWN)
