Hi, I have following device: ----------------- axen0 at uhub3 port 1 axen0: ASIX (0x0b95) AX88179A (0x1790), rev 2.10/2.00, addr 3 axen0: AX88179 ukphy0 at axen0 phy 3: OUI 0x00e038, model 0x0006, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto axen0: Ethernet address .... ----------------- And running 10.99.10, it emits following lines
Nov 13 20:24:54 beebox-03 /netbsd: [ 154.8236912] axen0: autoconfiguration error: invalid buffer(pkt#1), continue I put simple checking line as: ----------- diff --git a/sys/dev/usb/if_axen.c b/sys/dev/usb/if_axen.c index 423a87e5c541..6215db354c90 100644 --- a/sys/dev/usb/if_axen.c +++ b/sys/dev/usb/if_axen.c @@ -793,6 +793,8 @@ axen_uno_rx_loop(struct usbnet *un, struct usbnet_chain *c, uint32_t total_len) if ((buf[0] != 0xee) || (buf[1] != 0xee)) { aprint_error_dev(un->un_dev, "invalid buffer(pkt#%d), continue\n", pkt_count); + aprint_error_dev(un->un_dev, + "%04d %02x %02x\n", __LINE__, buf[0], buf[1]); if_statadd(ifp, if_ierrors, pkt_count); return; } ----------- and then the lines show: Nov 13 20:25:03 beebox-03 /netbsd: [ 163.6740410] axen0: autoconfiguration error: invalid buffer(pkt#1), continue Nov 13 20:25:03 beebox-03 /netbsd: [ 163.6740410] axen0: autoconfiguration error: 0797 00 08 so buf[0]:buf[1] expected 0xeeee is 0x0008. I've compared to openbsd: if_axen.c https://raw.githubusercontent.com/openbsd/src/master/sys/dev/usb/if_axen.c to N, and there are so many differencies. Does this (N) if_axen.c works on any installation ? Also, I've prepared GENERIC-axen with following conf: ------- include "arch/amd64/conf/GENERIC" options AXEN_DEBUG options MSGBUFSIZE=131072 ------- but No debug lines appears, please let me know what is wrong, thanks -- Makoto Fujiwara m...@netbsd.org mak...@if.t.u-tokyo.ac.jp Key fingerprint = 0BFA FAEB EAD1 90BA 7498 8F85 6809 9E0B B7EF A12E ---- pkgsrc freshness: http://www.ki.nu/~makoto/pkgsrc/check-update/00_Summary.html