On Fri, Dec 16, 2005 at 04:03:00PM -0600, Jeremy Messenger wrote: > >Yes. Please change ID_NFORCE2 define in pci_pm.h (in xmbmon sources) > >from 0x006410DE to 0x008410DE, this will "add support for your SMBus > >controller to xmbmon". I doubt it will ever work, but just to be > >absolutely sure, try again mbmon commands I asked and show me the > >output. > > # mbmon -A -d > Summary of Detection: > * SMB monitor(s)[ioctl:NVidia nForce2]: > ** Genesys Logic GL518SM_rev80 found at slave address: 0x58. > * ISA monitor(s): > ** Winbond Chip W83627HF/THF/THF-A found. > ** Int.Tec.Exp. Chip IT8705F/IT8712F or SIS950 found. > > # mbmon -S 8 > > Temp.= 9.0, 0.0, 0.0; Rot.= 937, 0, 0 > Vcore = 2.74, 0.00; Volt. = 2.74, 3.31, 11.48, 0.00, 0.00 > > Temp.= 25.0, 0.0, 0.0; Rot.= 833, 0, 0 > Vcore = 3.04, 0.00; Volt. = 3.04, 3.68, 12.76, 0.00, 0.00 > > Temp.= 41.0, 0.0, 0.0; Rot.= 750, 0, 0 > Vcore = 3.34, 0.00; Volt. = 3.34, 4.05, 14.03, 0.00, 0.00 > > Temp.= 57.0, 0.0, 0.0; Rot.= 681, 0, 0 > Vcore = 2.43, 0.00; Volt. = 2.43, 2.94, 10.20, 0.00, 0.00 > > Temp.= 9.0, 0.0, 0.0; Rot.= 937, 0, 0 > Vcore = 2.74, 0.00; Volt. = 2.74, 3.31, 11.48, 0.00, 0.00 > Not surprisingly that I get exactly the same nonsense on my nForce3:
[EMAIL PROTECTED]:1:1: class=0x0c0500 card=0x80c51043 chip=0x00d410de
rev=0xa4 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'nForce MCP3? SMBus Controller'
class = serial bus
subclass = SMBus
./mbmon -S -d
Using SMBus-ioctl access method[NVidia nForce2]!!
* Genesys Logic GL518SM_rev80 found.
./mbmon -S -c8 1
Temp.= 9.0, 0.0, 0.0; Rot.= 937, 0, 0
Vcore = 2.74, 0.00; Volt. = 2.74, 3.31, 11.48, 0.00, 0.00
Temp.= 25.0, 0.0, 0.0; Rot.= 833, 0, 0
Vcore = 3.04, 0.00; Volt. = 3.04, 3.68, 12.76, 0.00, 0.00
Temp.= 41.0, 0.0, 0.0; Rot.= 750, 0, 0
Vcore = 3.34, 0.00; Volt. = 3.34, 4.05, 14.03, 0.00, 0.00
Temp.= 57.0, 0.0, 0.0; Rot.= 681, 0, 0
Vcore = 2.43, 0.00; Volt. = 2.43, 2.94, 10.20, 0.00, 0.00
Temp.= 9.0, 0.0, 0.0; Rot.= 937, 0, 0
Vcore = 2.74, 0.00; Volt. = 2.74, 3.31, 11.48, 0.00, 0.00
Temp.= 25.0, 0.0, 0.0; Rot.= 833, 0, 0
Vcore = 3.04, 0.00; Volt. = 3.04, 3.68, 12.76, 0.00, 0.00
Temp.= 41.0, 0.0, 0.0; Rot.= 750, 0, 0
Vcore = 3.34, 0.00; Volt. = 3.34, 4.05, 14.03, 0.00, 0.00
Temp.= 57.0, 0.0, 0.0; Rot.= 681, 0, 0
Vcore = 2.43, 0.00; Volt. = 2.43, 2.94, 10.20, 0.00, 0.00
Exactly the same non-sense, with cycle count of four.
OK, I'm going to add a true AMD-8111 SMBus 2.0 support which
should also cover nForce-2/3/4 chipsets. For now, John, I
believe you're safe to revert your commit (I'll make it a
separate driver, nf2pm.c perhaps).
Cheers,
--
Ruslan Ermilov
[EMAIL PROTECTED]
FreeBSD committer
pgptY6YmA5uqs.pgp
Description: PGP signature
