Robert:

I've had good success with Blekin.  I do not use NDIS wrappers. I use Mad
WiFi.

[EMAIL PROTECTED] ~]# lspci
...
07:00.0 Ethernet controller: Atheros Communications, Inc.: Unknown device
001a (rev 01)

>From dmeg:
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
cs: IO port probe 0xe000-0xffff: clean.
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x24ffffff
pccard: CardBus card inserted into slot 1
ath_hal: no version for "struct_module" found: kernel tainted.
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (svn 2006-03-02)
ath_rate_sample: 1.2 (svn 2006-03-02)
ath_pci: 0.9.4.5 (svn 2006-03-02)
PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKD] -> GSI 11 (level, low)
-> IRQ 11
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 7.8 phy 4.5 radio 5.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xf6000000, irq=11


[EMAIL PROTECTED] ~]# lsmod | egrep ath
ath_pci                89128  0
ath_rate_sample        12416  1 ath_pci
wlan                  177500  5
wlan_wep,wlan_scan_sta,ath_pci,ath_rate_sample
ath_hal               188112  3 ath_pci,ath_rate_sample


[EMAIL PROTECTED] ~]# rpm -qa | egrep "wifi"
madwifi-ng-kmdl-2.6.15-1.1833_FC4-0.9.4.5-21.rhfc4.at
madwifi-ng-hal-kmdl-2.6.15-1.1833_FC4-0.9.4.5-21.rhfc4.at
madwifi-ng-0.9.4.5-21.rhfc4.at


Cheers;

E!






> Hello Scott,
>
> What was the brand/model of wireless G card that you got recently?
> You used it at a CWELUG meeting and were using it in class last
> night.  I ask because a poster on another list was asking about
> wireless G and Linux, and most of the responses so far were "Use XYZ
> card and ndiswrapper."
>
> Regards,
> - Robert
> http://www.cwelug.org/downloads
> Help others get OpenSource software.  Distribute FLOSS
> for Windows, Linux, *BSD, and MacOS X with BitTorrent
>
>
> _______________________________________________
> CWE-LUG mailing list
> [email protected]
> http://www.cwelug.org/
> http://www.cwelug.org/archives/
> http://www.cwelug.org/mailinglist/
>
>
>


 
_______________________________________________
CWE-LUG mailing list
[email protected]
http://www.cwelug.org/
http://www.cwelug.org/archives/
http://www.cwelug.org/mailinglist/

Reply via email to