I am trying to upgrade to cx_Freeze 4 from version 3. When I run the
same freeze command from version 3 on the same code base, I get an error
if there is no X server for cxfreeze to connect to. Is this expected?
Here is a simple cxfreeze run:
cxfreeze tc.py
X connection to localhost:10.0 broken (explicit kill or server
shutdown).
The same works fine with the old
FreezePython tc.py
Any ideas?
Jeff
P.S. I am running under Red Hat 4 and Python 2.5.4.
Confidentiality Notice: The information contained in this electronic
transmission is confidential and may be legally privileged. It is intended only
for the addressee(s) named above. If you are not an intended recipient, be
aware that any disclosure, copying, distribution or use of the information
contained in this transmission is prohibited and may be unlawful. If you have
received this transmission in error, please notify us by telephone (513)
229-5500 or by email ([email protected]). After replying, please erase it
from your computer system.
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
cx-freeze-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/cx-freeze-users
