Good news, we could fix the installation bug by replacing in setup.py :
libraries.append("python%s.%s" % sys.version_info[:2])
with
libraries.append("python%s" % vars["LDVERSION"])
Python installed is python3.4m , not python3.4 .
Hope this'll help.
Regards,
Samuel Bancal
On 06/17/2015 09:43 AM, Bancal Samuel wrote:
> Hi,
>
> We're building a package for Ubuntu 12.04 with some Python3.4 code.
> For this, we needed to install Python 3.4.3 from source :
> mkdir Python
> cd ~/Python/
> wget https://www.python.org/ftp/python/3.4.3/Python-3.4.3.tar.xz
> tar -xf Python-3.4.3.tar.xz
> cd Python-3.4.3/
> less README
> ./configure --prefix=/opt/python3.4
> make
> make test
> sudo make install
>
> After that we created the venv used for the project :
> cd ~/project
> rm -rf venv_py3/
> /opt/python3.4/bin/pyvenv venv_py3
> . venv_py3/bin/activate
> pip install --upgrade pip
>
> We tried to install cx_Freeze with pip ... but no success :(
> pip install cx_freeze
> [...]
> gcc -pthread build/temp.linux-x86_64-3.4/source/bases/Console.o
> -L/opt/python3.4/lib/python3.4/config-3.4m -lpython3.4 -o
> build/lib.linux-x86_64-3.4/cx_Freeze/bases/Console -Xlinker -export-dynamic
> -lpthread -ldl -lutil -lm -s
> /usr/bin/ld: cannot find -lpython3.4
> collect2: ld returned 1 exit status
> error: command 'gcc' failed with exit status 1
> ----------------------------------------
> Command "/home/bancal/project/venv_py3/bin/python3.4 -c "import setuptools,
> tokenize;__file__='/tmp/pip-build-f85zq1b7/cx-freeze/setup.py';exec(compile(getattr(tokenize,
> 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))"
> install --record /tmp/pip-oq5lxldy-record/install-record.txt
> --single-version-externally-managed --compile --install-headers
> /home/bancal/project/venv_py3/include/site/python3.4/cx-freeze" failed with
> error code 1 in /tmp/pip-build-f85zq1b7/cx-freeze
>
> We tried again but compiling cx_Freeze by hand: Same error occured :(
> cd
> wget
> https://pypi.python.org/packages/source/c/cx_Freeze/cx_Freeze-4.3.4.tar.gz#md5=5bd662af9aa36e5432e9144da51c6378
> tar -xf cx_Freeze-4.3.4.tar.gz
> cd cx_Freeze-4.3.4/
> less README.txt
> python setup.py build
> [...]
> gcc -pthread -Wno-unused-result -DNDEBUG -g -fwrapv -O3 -Wall
> -Wstrict-prototypes -fPIC -Ibuild/temp.linux-x86_64-3.4
> -I/home/bancal/project/venv_py3/include -I/opt/python3.4/include/python3.4m
> -c source/bases/Console.c -o
> build/temp.linux-x86_64-3.4/source/bases/Console.o
> gcc -pthread build/temp.linux-x86_64-3.4/source/bases/Console.o
> -L/opt/python3.4/lib/python3.4/config-3.4m -lpython3.4 -o
> build/lib.linux-x86_64-3.4/cx_Freeze/bases/Console -Xlinker -export-dynamic
> -lpthread -ldl -lutil -lm -s
> /usr/bin/ld: cannot find -lpython3.4
> collect2: ld returned 1 exit status
> error: command 'gcc' failed with exit status 1
>
> Does anyone know how to set up cx_Freeze on a Python 3.4.3 installed by hand?
> Do we need to ./configure Python with extra arguments?
> Do we need to pass extra arguments to cx_Freeze setup?
>
> Thanks,
> Samuel Bancal
>
--
Samuel Bancal
ENAC-IT
EPFL
------------------------------------------------------------------------------
_______________________________________________
cx-freeze-users mailing list
cx-freeze-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/cx-freeze-users
