On 8/10/2010 8:12 AM, Jon TURNEY wrote:
gcc4-core.sh exit code 126
This one is already reported at [1], and the workaround given
there,i.e. ....
Thanks for your reply. I had seen that report, but was dismayed to see
that the poster had received no response to his questions about whether
the workaround really solved the problem or had just suppressed a
symptom, leaving his system in a state which was causing subsequent
installation actions (and other programs) to fail.
....
Hmm... it seems that the output from these failing commands is only
captured in setup.log.full, not setup.log, so I think that messagebox
needs fixing.
You can look there, or run these scripts manually (they can be found
in /etc/postinstall) and post the errors reported by those scripts so
we can fix the problems.
I will (may take a few days, as we're about to take our daughter down to
college). Thanks again.
--
Bob Kline
http://www.rksystems.com
mailto:[email protected]
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://x.cygwin.com/docs/
FAQ: http://x.cygwin.com/docs/faq/
