Hi Dilyan/Dan, I used ./configure --enable-auth-sasldb as you had mentioned but still cannot get auxprop to work. This is the warning I see when its configuring........ configure: WARNING: Disabling SASL authentication database support
Any idea as to why this could be the case? Thanks and Regards, Om Kale On Tue, May 22, 2018 at 10:35 AM, Om Kale <omkal...@gmail.com> wrote: > Hi Dilyan/Dan, > I tried the ./configure --enable-auth-sasldb, however it does not create > the libsasldb.so.3 plugin. > Does this have to do with something with the cyrus version. I am using > cyrus-sasl-2.1.26 version (oldr one) downloaded from here: > https://www.cyrusimap.org/releases/cyrus-sasl-2.1.26.tar.gz > > The reason I cannot use the latest version (cyrus-sasl-2.1.27-rc8) is > because it has GPLv3 license in two of its config files namely: > config/config.sub > config/config.guess > The above two files were changed from GPLv2 to GPLv3 in all of the > cyrus-sasl-2.1.27 > versions, not sure why. > > I can use only GPLv2 licensed software. > > Thanks and Regards, > Om Kale > > > On Tue, May 22, 2018 at 6:51 AM, Dan White <dwh...@olp.net> wrote: > >> On 05/21/18 17:15 -0700, Om Kale wrote: >> >>> Hi Dilyan, >>> These are the contents of my /usr/lib/sasl2. >>> okale:/usr/local/lib/sasl2$ ls -lrth >>> total 904K >>> -rw-r--r-- 1 root root 4 May 9 18:11 berkeley_db.active >>> -rwxr-xr-x 1 root root 93K May 18 15:12 libcrammd5.so.3.0.0 >>> lrwxrwxrwx 1 root root 19 May 18 15:12 libcrammd5.so.3 -> >>> libcrammd5.so.3.0.0 >>> lrwxrwxrwx 1 root root 19 May 18 15:12 libcrammd5.so -> >>> libcrammd5.so.3.0.0 >>> -rwxr-xr-x 1 root root 672 May 18 15:12 libcrammd5.la >>> -rwxr-xr-x 1 root root 232K May 18 15:12 libdigestmd5.so.3.0.0 >>> lrwxrwxrwx 1 root root 21 May 18 15:12 libdigestmd5.so.3 -> >>> libdigestmd5.so.3.0.0 >>> lrwxrwxrwx 1 root root 21 May 18 15:12 libdigestmd5.so -> >>> libdigestmd5.so.3.0.0 >>> -rwxr-xr-x 1 root root 693 May 18 15:12 libdigestmd5.la >>> -rwxr-xr-x 1 root root 160K May 18 15:12 libscram.so.3.0.0 >>> lrwxrwxrwx 1 root root 17 May 18 15:12 libscram.so.3 -> >>> libscram.so.3.0.0 >>> lrwxrwxrwx 1 root root 17 May 18 15:12 libscram.so -> libscram.so.3.0.0 >>> -rwxr-xr-x 1 root root 669 May 18 15:12 libscram.la >>> -rwxr-xr-x 1 root root 214K May 18 15:12 libotp.so.3.0.0 >>> lrwxrwxrwx 1 root root 15 May 18 15:12 libotp.so.3 -> libotp.so.3.0.0 >>> lrwxrwxrwx 1 root root 15 May 18 15:12 libotp.so -> libotp.so.3.0.0 >>> -rwxr-xr-x 1 root root 657 May 18 15:12 libotp.la >>> -rwxr-xr-x 1 root root 81K May 18 15:12 libplain.so.3.0.0 >>> lrwxrwxrwx 1 root root 17 May 18 15:12 libplain.so.3 -> >>> libplain.so.3.0.0 >>> lrwxrwxrwx 1 root root 17 May 18 15:12 libplain.so -> libplain.so.3.0.0 >>> -rwxr-xr-x 1 root root 668 May 18 15:12 libplain.la >>> -rwxr-xr-x 1 root root 79K May 18 15:12 libanonymous.so.3.0.0 >>> lrwxrwxrwx 1 root root 21 May 18 15:12 libanonymous.so.3 -> >>> libanonymous.so.3.0.0 >>> lrwxrwxrwx 1 root root 21 May 18 15:12 libanonymous.so -> >>> libanonymous.so.3.0.0 >>> -rwxr-xr-x 1 root root 684 May 18 15:12 libanonymous.la >>> -rwxr-xr-x 1 root root 37 May 18 15:59 memcached-sasl-pwdb >>> -rw-r--r-- 1 root root 105 May 18 16:02 memcached.conf >>> okale:/usr/local/lib/sasl2$ >>> >> >> libsasldb is missing. >> >>> I had changed the symbolic links as mentioned in the cyrus wiki like >>> this: >>> >>> ln -s /usr/local/lib/sasl2 /usr/lib/sasl2 >>> >>> >>> In spite of this, I see the following error in my memcached server log: >>> >>> SASL (severity 5): could not find auxprop plugin, was searching for >>> 'sasldb' >>> >>> My memcached.conf looks as below: >>> pwcheck_method: auxprop >>> auxprop_plugin: sasldb >>> mech_list: plain >>> log_level: 5 >>> >> >> Setting log_level to 7 may give you more verbose output (auth facility >> syslog). >> >> sasldb_path: /usr/lib/sasl2 >>> >> >> On Sat, May 19, 2018 at 5:47 AM, Dilyan Palauzov < >>> dilyan.palau...@aegee.org> >>> >>>> On Fri, 2018-05-18 at 14:46 -0700, Om Kale wrote: >>>> > /sasldb$ ls -lrt >>>> > total 176 >>>> > -rw-rw-r-- 1 cisco cisco 4750 Jan 27 2012 sasldb.h >>>> > -rw-rw-r-- 1 cisco cisco 2527 Jan 27 2012 NTMakefile >>>> > -rw-rw-r-- 1 cisco cisco 2606 Jan 27 2012 Makefile.am >>>> > -rw-rw-r-- 1 cisco cisco 3882 Jan 27 2012 db_none.c >>>> > -rw-rw-r-- 1 cisco cisco 9451 Jan 27 2012 db_ndbm.c >>>> > -rw-rw-r-- 1 cisco cisco 9366 Jan 27 2012 db_gdbm.c >>>> > -rw-rw-r-- 1 cisco cisco 7235 Jan 27 2012 allockey.c >>>> > -rw-rw-r-- 1 cisco cisco 12505 Oct 12 2012 db_berkeley.c >>>> > -rw-rw-r-- 1 cisco cisco 19194 Nov 6 2012 Makefile.in >>>> > -rw-rw-r-- 1 cisco cisco 14104 May 9 16:17 db_none.o >>>> > -rw-rw-r-- 1 cisco cisco 18533 May 18 14:12 Makefile >>>> > -rw-r--r-- 1 root root 31336 May 18 14:12 allockey.lo >>>> > -rw-r--r-- 1 root root 14136 May 18 14:12 db_none.lo >>>> > -rw-r--r-- 1 root root 600 May 18 14:12 libsasldb.la >>>> >>> >> db_berkeley.lo is missing. I would guess that db_none.o indicates that >> the berkeley library (or your chosen --with-dblib) cannot be found. Review >> the output of ./configure or config.log for berkeley related errors. >> >> There's probably no point in testing your memcached code until your >> pluginviewer output is correct. >> > >
