Common Bron, Ellie, mates :) any advise? Cheers :) :)
--- EGOITZ AURREKOETXEA Departamento de sistemas 944 209 470 Parque Tecnológico. Edificio 103 48170 Zamudio (Bizkaia) ego...@sarenet.es www.sarenet.es [1] Antes de imprimir este correo electrónico piense si es necesario hacerlo. El 13-12-2018 19:25, Egoitz Aurrekoetxea escribió: > Hi again! > > Else as a simplication way can you replicate any manner a 2.3 with some newer > version?. At least in manual mode (not rolling)?. > > Cheers. > > --- > > EGOITZ AURREKOETXEA > Departamento de sistemas > 944 209 470 > Parque Tecnológico. Edificio 103 > 48170 Zamudio (Bizkaia) > ego...@sarenet.es > www.sarenet.es [1] > Antes de imprimir este correo electrónico piense si es necesario hacerlo. > > El 13-12-2018 16:52, Egoitz Aurrekoetxea escribió: > >> Good afternoon, >> >> I was trying to upgrade part of our Cyrus imap installation, concretely that >> one consisting in still 2.3. I was planning to set up Cyrus 3.0. I have seen >> all works properly except for the unexpunge command because as someone >> stated here, a reconstruct -V max was needed.The problem is that this >> reconstruct command, takes ages and I'm not able to keep the service offline >> so many time. So I have been thinking in the following scenario : >> >> - Cyrus 2.3 master -> Cyrus 2.4 slave >> >> Get this 2.4 slave ready and set it as master. But here comes my first >> doubt. Does the 2.4 replication work with the 2.3 replication?. Can in this >> pair, both (the 2.3 and the 2.4) be both master and slave?. I mean to switch >> roles in the pair. Make one become master and the other slave and vice >> versa?. >> >> Let's think now Cyrus 2.4 is ready and working. >> >> - Now, I would set up a new 3.0 slave. I know 2.4 could replicate with 3.0. >> So I would get the 3.0 ready and then set 3.0 as master. Can in this pair >> both the 2.4 and 3.0 be master and slave?. Meaning again to the same role >> switching commented before... to make one to be master and the other slave >> or vice versa.... >> >> I'l will end up with 2 3.0 master and slave... but I need to trace the >> path... >> >> Does anyone see any other way?. >> >> Best regards, >> >> - >> >> -- >> >> EGOITZ AURREKOETXEA >> Departamento de sistemas >> 944 209 470 >> Parque Tecnológico. Edificio 103 >> 48170 Zamudio (Bizkaia) >> ego...@sarenet.es >> www.sarenet.es [1] >> Antes de imprimir este correo electrónico piense si es necesario hacerlo. >> ---- >> Cyrus Home Page: http://www.cyrusimap.org/ >> List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/ >> To Unsubscribe: >> https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus > > ---- > Cyrus Home Page: http://www.cyrusimap.org/ > List Archives/Info: http://lists.andrew.cmu.edu/pipermail/info-cyrus/ > To Unsubscribe: > https://lists.andrew.cmu.edu/mailman/listinfo/info-cyrus Links: ------ [1] http://www.sarenet.es