Automated smoke report for 5.14.2 patch
7154d6bffea2ceba994e7dc8dd7b4ff9e5107f66 v5.14.2-34-g7154d6b
zippy: AMD Athlon(tm) Dual Core Processor 5050e (AuthenticAMD 2400MHz)
(x86_64/2 cpu)
on linux - 3.2.0-29-generic [debian]
using cc version 4.6.3
smoketime 9 hours 46 minutes (average 36 minutes 40 seconds)
Summary: PASS
O = OK F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during: - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep
v5.14.2-34-g7154d6b Configuration (common) none
----------- ---------------------------------------------------------
O O O O
O O O O -Duse64bitint
O O O O -Duselongdouble
O O O O -Dusemorebits
O O O O -Duseithreads
O O O O -Duseithreads -Duse64bitint
O O O O -Duseithreads -Duselongdouble
O O O O -Duseithreads -Dusemorebits
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio
Locally applied patches:
uncommitted-changes
SMOKE7154d6bffea2ceba994e7dc8dd7b4ff9e5107f66
Compiler messages(gcc):
Configure ...try.c: In function ‘main’:
try.c:36:6: warning: ignoring return value of ‘pipe’, declared with attribute
warn_unused_result [-Wunused-result]
try.c:37:6: warning: ignoring return value of ‘pipe’, declared with attribute
warn_unused_result [-Wunused-result]
try.c:53:8: warning: ignoring return value of ‘write’, declared with attribute
warn_unused_result [-Wunused-result]
try.c:66:8: warning: ignoring return value of ‘write’, declared with attribute
warn_unused_result [-Wunused-result]
try.c:72:8: warning: ignoring return value of ‘write’, declared with attribute
warn_unused_result [-Wunused-result]
try.c:78:6: warning: ignoring return value of ‘read’, declared with attribute
warn_unused_result [-Wunused-result]
try.c: In function ‘main’:
try.c:4081:17: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4084:18: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4087:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4090:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4117:17: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4120:18: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4123:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4126:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4177:17: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4180:18: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4183:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4186:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4213:16: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4216:17: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4219:18: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4222:18: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4477:18: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4480:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4483:20: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:4486:20: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10273:18: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10276:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10279:20: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10282:20: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10309:18: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10312:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10315:20: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10318:20: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10345:18: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10348:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10351:20: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10354:20: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10381:17: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10384:18: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10387:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10390:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10609:19: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10612:20: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10615:21: warning: extra tokens at end of #ifdef directive [enabled by
default]
try.c:10618:21: warning: extra tokens at end of #ifdef directive [enabled by
default]
toke.c: In function ‘Perl_yylex’:
toke.c:4796:17: warning: comparison between signed and unsigned integer
expressions [-Wsign-compare]
regcomp.c: In function ‘S_regpiece’:
regcomp.c:7429:11: warning: variable ‘parse_start’ set but not used
[-Wunused-but-set-variable]
util.c: In function ‘Perl_safesyscalloc’:
util.c:297:14: warning: variable ‘total_size’ set but not used
[-Wunused-but-set-variable]
util.c: In function ‘S_write_no_mem’:
util.c:71:5: warning: ignoring return value of ‘write’, declared with attribute
warn_unused_result [-Wunused-result]
hv.c: In function ‘S_hv_delete_common’:
hv.c:907:16: warning: variable ‘first_entry’ set but not used
[-Wunused-but-set-variable]
hv.c: In function ‘S_clear_placeholders’:
hv.c:1619:7: warning: variable ‘first’ set but not used
[-Wunused-but-set-variable]
hv.c: In function ‘S_unshare_hek_or_pvn’:
hv.c:2649:10: warning: variable ‘first’ set but not used
[-Wunused-but-set-variable]
sv.c: In function ‘Perl_sv_vcatpvfn’:
sv.c:10052:7: warning: ignoring return value of ‘gcvt’, declared with attribute
warn_unused_result [-Wunused-result]
sv.c:10890:7: warning: ignoring return value of ‘gcvt’, declared with attribute
warn_unused_result [-Wunused-result]
sv.c: In function ‘Perl_sv_2pv_flags’:
sv.c:2762:3: warning: ignoring return value of ‘gcvt’, declared with attribute
warn_unused_result [-Wunused-result]
sv.c:2951:6: warning: ignoring return value of ‘gcvt’, declared with attribute
warn_unused_result [-Wunused-result]
pp_ctl.c: In function ‘Perl_pp_goto’:
pp_ctl.c:2702:7: warning: variable ‘gimme’ set but not used
[-Wunused-but-set-variable]
pp_ctl.c:2701:8: warning: variable ‘newsp’ set but not used
[-Wunused-but-set-variable]
pp_ctl.c: In function ‘Perl_pp_leavewhen’:
pp_ctl.c:4849:9: warning: variable ‘gimme’ set but not used
[-Wunused-but-set-variable]
pp_sys.c: In function ‘Perl_pp_warn’:
pp_sys.c:422:17: warning: variable ‘pv’ set but not used
[-Wunused-but-set-variable]
pp_sys.c: In function ‘Perl_pp_die’:
pp_sys.c:462:17: warning: variable ‘pv’ set but not used
[-Wunused-but-set-variable]
doio.c: In function ‘S_exec_failed’:
doio.c:1383:2: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result [-Wunused-result]
doio.c: In function ‘Perl_nextargv’:
doio.c:871:7: warning: ignoring return value of ‘fchown’, declared with
attribute warn_unused_result [-Wunused-result]
regexec.c: In function ‘S_find_byclass’:
regexec.c:1530:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1536:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1541:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1551:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1561:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1566:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1577:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1584:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1596:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1603:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1622:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1629:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1647:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1654:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1673:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1691:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:1394:9: warning: variable ‘lnc’ set but not used
[-Wunused-but-set-variable]
regexec.c: In function ‘S_regmatch’:
regexec.c:3680:7: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:3756:9: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:3760:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:3762:9: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:3766:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:3768:9: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:3771:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:3855:7: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:3855:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:3855:1: warning: variable ‘throw_away’ set but not used
[-Wunused-but-set-variable]
regexec.c: In function ‘S_regrepeat’:
regexec.c:6038:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6083:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6135:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6184:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6237:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6270:6: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
perlio.c: In function ‘S_more_refcounted_fds’:
perlio.c:2377:2: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result [-Wunused-result]
perlio.c: In function ‘PerlIO_debug’:
perlio.c:519:2: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result [-Wunused-result]
Dumper.xs: In function ‘DD_dump’:
Dumper.xs:817:6: warning: format ‘%ld’ expects argument of type ‘long int’, but
argument 2 has type ‘U32’ [-Wformat]
Call.xs: In function ‘filter_call’:
Call.xs:63:3: warning: format ‘%d’ expects argument of type ‘int’, but argument
3 has type ‘STRLEN’ [-Wformat]
Call.xs:63:3: warning: format ‘%d’ expects argument of type ‘int’, but argument
5 has type ‘STRLEN’ [-Wformat]
Call.xs:100:5: warning: format ‘%d’ expects argument of type ‘int’, but
argument 4 has type ‘STRLEN’ [-Wformat]
Call.xs:156:8: warning: format ‘%d’ expects argument of type ‘int’, but
argument 3 has type ‘STRLEN’ [-Wformat]
Call.xs:175:14: warning: format ‘%d’ expects argument of type ‘int’, but
argument 4 has type ‘STRLEN’ [-Wformat]
sdbm.c: In function ‘makroom’:
sdbm.c:371:2: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result [-Wunused-result]
regcomp.c: In function ‘S_dump_trie’:
regcomp.c:1040:5: warning: variable ‘re_debug_flags’ set but not used
[-Wunused-but-set-variable]
regcomp.c: In function ‘S_dump_trie_interim_list’:
regcomp.c:1131:5: warning: variable ‘re_debug_flags’ set but not used
[-Wunused-but-set-variable]
regcomp.c: In function ‘S_dump_trie_interim_table’:
regcomp.c:1189:5: warning: variable ‘re_debug_flags’ set but not used
[-Wunused-but-set-variable]
regcomp.c: In function ‘Perl_re_compile’:
regcomp.c:5316:5: warning: variable ‘re_debug_flags’ set but not used
[-Wunused-but-set-variable]
regcomp.c: In function ‘Perl_reg_named_buff_nextkey’:
regcomp.c:5465:5: warning: variable ‘re_debug_flags’ set but not used
[-Wunused-but-set-variable]
regcomp.c: In function ‘Perl_pregfree2’:
regcomp.c:11331:5: warning: variable ‘re_debug_flags’ set but not used
[-Wunused-but-set-variable]
sv.c:10890:7: warning: ignoring return value of ‘qgcvt’, declared with
attribute warn_unused_result [-Wunused-result]
sv.c:2762:3: warning: ignoring return value of ‘qgcvt’, declared with attribute
warn_unused_result [-Wunused-result]
sv.c:2951:6: warning: ignoring return value of ‘qgcvt’, declared with attribute
warn_unused_result [-Wunused-result]
regcomp.c: In function ‘Perl_regdupe_internal’:
regcomp.c:11674:14: warning: variable ‘npar’ set but not used
[-Wunused-but-set-variable]
sv.c: In function ‘Perl_dirp_dup’:
sv.c:11337:11: warning: ignoring return value of ‘fchdir’, declared with
attribute warn_unused_result [-Wunused-result]
regexec.c:3680:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6038:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6083:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6135:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6184:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6237:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
regexec.c:6270:1: warning: variable ‘ok’ set but not used
[-Wunused-but-set-variable]
perlio.c:510:2: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result [-Wunused-result]
perl.c: In function ‘S_init_tls_and_interp’:
perl.c:105:2: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result [-Wunused-result]
threads.c: In function ‘S_ithread_create’:
threads.xs:711:9: warning: ignoring return value of ‘write’, declared with
attribute warn_unused_result [-Wunused-result]
--
Report by Test::Smoke v1.43 build 1271 running on perl 5.14.2
(Reporter v0.035 / Smoker v0.045)
