Automated smoke report for 5.17.8 patch
c9612cb4a5ee19f5c24c8b9e3615e5f55881ed68 v5.17.7.0-119-gc9612cb
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (3009
MHz) (amd64/2 cpu)
on openbsd - 4.7
using cc version 3.3.5 (propolice)
smoketime 11 hours 11 minutes (average 1 hour 23 minutes)
Summary: FAIL(F)
O = OK F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during: - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep
v5.17.7.0-119-gc9612cb Configuration (common) none
----------- ---------------------------------------------------------
F F O F
F F F F -Duse64bitint
F F F F -Duseithreads
F F F F -Duseithreads -Duse64bitint
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio
Locally applied patches:
uncommitted-changes
SMOKEc9612cb4a5ee19f5c24c8b9e3615e5f55881ed68
Testsuite was run only with 'harness' and HARNESS_OPTIONS=j3
Failures: (common-args) none
[stdio]
../cpan/Time-HiRes/t/usleep.t...............................FAILED
3-4
Non-zero exit status: 2
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio]
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
../cpan/Time-HiRes/t/usleep.t...............................FAILED
3
Non-zero exit status: 1
[perlio] -DDEBUGGING
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
[stdio] -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
[perlio] -Duse64bitint
[perlio] -DDEBUGGING -Duseithreads
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[stdio] -DDEBUGGING -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
[perlio] -DDEBUGGING -Duse64bitint
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
[stdio] -Duseithreads
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
[perlio] -Duseithreads
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../dist/Cwd/t/Spec.t........................................FAILED
../lib/FileHandle.t.........................................??????
[stdio] -DDEBUGGING -Duseithreads
../cpan/Time-HiRes/t/usleep.t...............................FAILED
4
Non-zero exit status: 1
[stdio] -Duseithreads -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
../cpan/Time-HiRes/t/nanosleep.t............................FAILED
3
Non-zero exit status: 1
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
[perlio] -Duseithreads -Duse64bitint
../t/re/reg_fold.t..........................................FAILED
../t/op/alarm.t.............................................FAILED
4
../lib/Benchmark.t..........................................FAILED
15
Non-zero exit status: 1
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/Time-HiRes/t/alarm.t................................FAILED
2
Non-zero exit status: 1
../lib/locale.t.............................................FAILED
No plan found in TAP output
[stdio] -DDEBUGGING -Duseithreads -Duse64bitint
../t/comp/multiline.t.......................................FAILED
No plan found in TAP output
../t/op/alarm.t.............................................FAILED
4
../cpan/Memoize/t/expmod_t.t................................FAILED
7, 10
../cpan/IO-Compress/t/107multi-rawdeflate.t.................FAILED
Bad plan. You planned 1828 tests but ran 1177.
[perlio] -DDEBUGGING -Duseithreads -Duse64bitint
../t/op/alarm.t.............................................FAILED
4
../cpan/JSON-PP/t/099_binary.t..............................FAILED
Bad plan. You planned 2432 tests but ran 1263.
Compiler messages(gcc):
/tmp//ccMhSzMC.o(.text+0x4c): In function `main':
/tmp//cc1tsJ9l.o(.text+0x78): In function `main':
/tmp//ccm0NUBB.o(.text+0x9d): In function `xxx':
/tmp//ccokRezL.o(.text+0xc4): In function `main':
inline.h:135: warning: `S_croak_memory_wrap' defined but not used
regcomp.o(.text+0x11f22): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x32a): In function `XS_DynaLoader_dl_load_file':
libperl.a(regcomp.o)(.text+0x11f22): In function `S_regclass':
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x27ec): In function `Perl_sv_2pv_flags':
/tmp//cc3nezcI.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is often
misused, please use snprintf()
/tmp//ccbtr3wP.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is often
misused, please use snprintf()
/tmp//ccxnfhm7.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is often
misused, please use vsnprintf()
/tmp//ccjZ7nXY.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is often
misused, please use snprintf()
regcomp.o(.text+0x217d3): In function `S_regclass':
/home/perlsmoke/smoke-me/perl-current/regcomp.c:11421: warning: sprintf() is
often misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x575): In function `XS_DynaLoader_dl_load_file':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173:
warning: strcat() is almost always misused, please use strlcat()
libperl.a(regcomp.o)(.text+0x217d3): In function `S_regclass':
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is often
misused, please use snprintf()
../libperl.a(sv.o)(.text+0x78ea): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2910: warning: sprintf() is often
misused, please use snprintf()
/tmp//ccS7Q7wI.o(.text+0x4c): In function `main':
/tmp//cczCJxnD.o(.text+0x78): In function `main':
/tmp//ccnvMVYb.o(.text+0x9d): In function `xxx':
/tmp//ccVuC996.o(.text+0xc4): In function `main':
/tmp//cccv23qA.o(.text+0x4c): In function `main':
/tmp//ccj0TfjG.o(.text+0x78): In function `main':
/tmp//ccPG1CmU.o(.text+0x9d): In function `xxx':
/tmp//cc8shCb6.o(.text+0xc4): In function `main':
/tmp//ccTneCCm.o(.text+0x4c): In function `main':
/tmp//cc1L7NLy.o(.text+0x78): In function `main':
/tmp//cc1kcs30.o(.text+0x9d): In function `xxx':
/tmp//ccmZrfk2.o(.text+0xc4): In function `main':
regcomp.o(.text+0x13a5b): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x374): In function `XS_DynaLoader_dl_load_file':
libperl.a(regcomp.o)(.text+0x13a5b): In function `S_regclass':
../libperl.a(sv.o)(.text+0x2b60): In function `Perl_sv_2pv_flags':
/tmp//ccfMtk7Y.o(.text+0x4c): In function `main':
/tmp//ccDIn7M9.o(.text+0x78): In function `main':
/tmp//ccvLkwtZ.o(.text+0x9d): In function `xxx':
/tmp//ccDMzgcj.o(.text+0xc4): In function `main':
regcomp.o(.text+0x23ecc): In function `S_regclass':
libperl.a(DynaLoader.o)(.text+0x5ea): In function `XS_DynaLoader_dl_load_file':
libperl.a(regcomp.o)(.text+0x23ecc): In function `S_regclass':
../libperl.a(sv.o)(.text+0x7d2f): In function `Perl_sv_2pv_flags':
/tmp//ccYCAk6X.o(.text+0x4c): In function `main':
/tmp//cczKQYwc.o(.text+0x78): In function `main':
/tmp//ccwJexA2.o(.text+0x9d): In function `xxx':
/tmp//ccJIYcv0.o(.text+0xc4): In function `main':
/tmp//ccThSqRF.o(.text+0x4c): In function `main':
/tmp//ccDnNym2.o(.text+0x78): In function `main':
/tmp//ccQ2haFT.o(.text+0x9d): In function `xxx':
/tmp//ccQlD5Cm.o(.text+0xc4): In function `main':
--
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)
Logs at http://perl.develop-help.com/reports/
Branch: origin/blead
Configuration: default
