This is an automated smoke report for branch blead. Patch: 5208a0305e9e82c534fa034515d54a0409dfcc77
This report is automatically generated from smoke tests that are automatically run. The logs below have been trimmed in an attempt to minimize the size of this message. The Windows smokers are built with dmake, and the Makefile.mk is modified using a patch. Additionally, several patches are applied to silence tests that fail, especially ones that fail intermittently. (Still working on a few of those.) The patches are all available at the following URL: https://github.com/dcollinsn/perl5-smokers-config Additional logging information may be available by contacting the operator of this machine at [email protected]. Feedback, requests, and suggested configurations are welcome. Information about this revision of perl: Branch: blead Patch: 5208a0305e9e82c534fa034515d54a0409dfcc77 Author: Jarkko Hietaniemi <[email protected]> Commit summary: Fix on top of 75326c48. Worked partly accidentally, and as a bonus caused asan off-stack-variable read violations. Note, however, that this smoker does not build every commit - it condenses repeated commits within a few minutes of each other. Check the previous smoke report from this address against this branch to start your bisect. ======================================================================== SUMMARY ======================================================================== It appears that this test has failed, unexpectedly, on several platforms. Here is a list of those platforms. The test results are shown below. linux-debug-thread-quadmath Tests on the following platforms failed, but at least one test failure was expected on these platforms. Review the test failures to ensure that there are no new or unexpected failures, but it is normal to have several Cygwin and Windows builders here. cygwin-thread-ld cygwin-thread-quadmath win64-mingww64-6.1.0-win32-sjlj-ld That leaves the following platforms on which the build was successful: cygwin-base cygwin-thread-debug linux-base linux-debug-mymalloc linux-debug-thread linux-debug-thread-ld linux-static win32-mingww64-6.1.0 win64-mingww64-6.1.0 win64-mingww64-6.1.0-win32-sjlj ======================================================================== BEGIN UNEXPECTED FAILURES ======================================================================== ------------------------------------------------------------------------ Platform summary: linux-debug-thread-quadmath Step 0: git > git --version Step 1: patch ualarm.t > patch -p1 -i /home/dcollins/toolchain/buildbot-patches/time.hires.ualarm.patch Step 2: patch usleep.t > patch -p1 -i /home/dcollins/toolchain/buildbot-patches/time.hires.usleep.patch Step 3: RT #128598 > patch -p1 -i > /home/dcollins/toolchain/buildbot-patches/0001-RT-128598-libperl.t-optimizer-may-use-any-builtins.patch Step 4: configure > ./Configure -Dusedevel -des '-Dcc=ccache gcc-6' -DDEBUGGING -Dusethreads > -Dusequadmath Step 5: compile > make test_prep Step 6: perl -V > ./perl -Ilib -V Step 7: treesize > du -s -k . Step 8: test > make test > Step failed > STDIO follows: make test in dir /home/dcollins/toolchain/buildbot/master/workers/bot1/linux-debug-thread-quadmath/build (timeout 1200 secs) watching logfiles {} argv: ['make', 'test'] environment: AFL_CC=gcc-6 AFL_HARDEN=1 HOME=/home/dcollins LANG=en_US.UTF-8 LOGNAME=dcollins MAIL=/var/mail/dcollins OLDPWD=/home/dcollins/toolchain/buildbot/master PERLBREW_BASHRC_VERSION=0.76 PERLBREW_HOME=/home/dcollins/.perlbrew PERLBREW_ROOT=/home/dcollins/toolchain/perl5 PWD=/home/dcollins/toolchain/buildbot/master/workers/bot1/linux-debug-thread-quadmath/build SHELL=/bin/bash SHLVL=1 SSH_CLIENT=10.0.0.18 52975 22 SSH_CONNECTION=10.0.0.18 52975 10.0.0.5 22 SSH_TTY=/dev/pts/2 TERM=xterm USER=dcollins XDG_RUNTIME_DIR=/run/user/1000 XDG_SESSION_ID=5 _=/usr/local/bin/buildbot using PTY: False ...snip... cd t && (rm -f perl; /bin/ln -s ../perl perl) ./runtests choose t/base/cond .................................................... ok ...snip... t/op/signatures ................................................ ok # Failed test 3 - Reaped only one process at op/sigsystem.t line 42 Use of uninitialized value in numeric eq (==) at op/sigsystem.t line 43. # Failed test 4 - Reaped the right process. at op/sigsystem.t line 43 # $VAR1 = []; t/op/sigsystem ................................................. FAILED at test 3 t/op/sleep ..................................................... ok ...snip... cpan/Pod-Simple/t/encod03 ...................................... ok # parser guessed wrong encoding expected 'CP1252' got 'UTF-8' cpan/Pod-Simple/t/encod04 ...................................... ok ...snip... cpan/Test-Simple/t/Legacy/Builder/try .......................... ok cpan/Test-Simple/t/Legacy/c_flag ............................... ok ...snip... dist/ExtUtils-CBuilder/t/02-link ............................... ok gcc-6: error trying to exec 'cc1plus': execvp: No such file or directory dist/ExtUtils-CBuilder/t/03-cplusplus .......................... skipped ...snip... lib/warnings ................................................... ok op/sigsystem.t Failed 1 test out of 2389, 99.96% okay. ### Since not all tests were successful, you may want to run some of ...snip... ### Bourne-style shells, like bash, ksh, and zsh, respectively. Elapsed: 934 sec u=6.02 s=4.07 cu=418.03 cs=113.64 scripts=2389 tests=918871 makefile:815: recipe for target 'test' failed make: *** [test] Error 1 program finished with exit code 2 elapsedTime=946.728033 ======================================================================== BEGIN EXPECTED FAILURES ======================================================================== ------------------------------------------------------------------------ Platform summary: cygwin-thread-ld Step 0: git > git --version Step 1: patch cygwin.t > patch -p1 -i /home/dcollins/buildbot-patches/lib.cygwin.t.patch Step 2: patch threads.t > patch -p1 -i /home/dcollins/buildbot-patches/op.threads.t.patch Step 3: patch ualarm.t > patch -p1 -i /home/dcollins/buildbot-patches/time.hires.ualarm.patch Step 4: configure > ./Configure -Dusedevel -des '-Doptimize=-O3 -g' -Dusethreads -Duselongdouble > -Accflags=-D_GNU_SOURCE -Alibswanted=cygwin Step 5: compile > make test_prep Step 6: perl -V > ./perl -Ilib -V Step 7: treesize > du -s -k . Step 8: test > make test > Step failed > STDIO follows: make test in dir /home/dcollins/buildbot/cygwin1/cygwin-thread-ld/build (timeout 1200 secs) watching logfiles {} argv: ['make', 'test'] environment: !::=::\ ALLUSERSPROFILE=C:\ProgramData APPDATA=C:\Users\dcollins\AppData\Roaming COMMONPROGRAMFILES=C:\Program Files\Common Files COMSPEC=C:\Windows\system32\cmd.exe CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files CommonProgramW6432=C:\Program Files\Common Files EXECIGNORE=*.dll HOME=/home/dcollins HOMEDRIVE=C: LANG=en_US.UTF-8 LOCALAPPDATA=C:\Users\dcollins\AppData\Local NUMBER_OF_PROCESSORS=8 OLDPWD=/home/dcollins/perl OS=Windows_NT PROCESSOR_ARCHITECTURE=AMD64 PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 94 Stepping 3, GenuineIntel PROCESSOR_LEVEL=6 PROCESSOR_REVISION=5e03 PROFILEREAD=true PROGRAMFILES=C:\Program Files PUBLIC=C:\Users\Public PWD=/home/dcollins/buildbot/cygwin1/cygwin-thread-ld/build ProgramData=C:\ProgramData ProgramFiles(x86)=C:\Program Files (x86) ProgramW6432=C:\Program Files SESSIONNAME=Console SHELL=/bin/bash SHLVL=1 SYSTEMDRIVE=C: SYSTEMROOT=C:\Windows TEMP=/tmp TERM=xterm TMP=/tmp TZ=America/New_York USER=dcollins USERNAME=dcollins USERPROFILE=C:\Users\dcollins WINDIR=C:\Windows _=/usr/bin/buildslave asl.log=Destination=file using PTY: False ...snip... cd t && (rm -f perl.exe; /usr/bin/ln.exe -s ../perl.exe perl.exe) PATH=/home/dcollins/buildbot/cygwin1/cygwin-thread-ld/build:.:/usr/local/bin:/usr/bin:/cygdrive/c/Perl64/site/bin:/cygdrive/c/Perl64/bin:/cygdrive/c/ProgramData/Oracle/Java/javapath:/cygdrive/c/Windows/system32:/cygdrive/c/Windows:/cygdrive/c/Windows/System32/Wbem:/cygdrive/c/Windows/System32/WindowsPowerShell/v1.0:/cygdrive/c/Program\ Files\ \(x86\)/NVIDIA\ Corporation/PhysX/Common:/cygdrive/c/Users/dcollins/AppData/Local/Programs/MiKTeX\ 2.9/miktex/bin:/bin:/usr/local:/etc:/usr/lib:/lib:/sbin:/usr/sbin:/usr/libexec ./runtests choose t/base/cond .................................................... ok ...snip... t/op/sysio ..................................................... ok # shmget failed: Function not implemented # msgget failed t/op/taint ..................................................... ok ...snip... cpan/ExtUtils-MakeMaker/t/MM_BeOS .............................. skipped skip() needs to know $how_many tests are in the block at t/MM_Cygwin.t line 119 cpan/ExtUtils-MakeMaker/t/MM_Cygwin ............................ ok ...snip... cpan/IPC-Cmd/t/03_run-forked ................................... ok # # It may be that the cygserver service isn't running. # # You also may have to set the CYGWIN environment variable # to 'server' before running the test suite: # # export CYGWIN=server # cpan/IPC-SysV/t/ipcsysv ........................................ ok ...snip... cpan/Pod-Simple/t/encod04 ...................................... ok # parser guessed wrong encoding expected 'CP1252' got 'UTF-8' cpan/Pod-Simple/t/end_over ..................................... ok ...snip... cpan/Test-Simple/t/Legacy/Builder/try .......................... ok cpan/Test-Simple/t/Legacy/c_flag ............................... ok ...snip... dist/Time-HiRes/t/tv_interval .................................. ok skip() needs to know $how_many tests are in the block at t/ualarm.t line 102 dist/Time-HiRes/t/ualarm ....................................... ok ...snip... dist/Time-HiRes/t/usleep ....................................... ok # Failed test 'atime set correctly' # at t/utime.t line 35. # got: '1.111111' # expected: '1.1111111' # Failed test 'mtime set correctly' # at t/utime.t line 36. # got: '2.2222221' # expected: '2.2222222' # Failed test 'atime set correctly' # at t/utime.t line 44. # got: '1.111111' # expected: '1.1111111' # Failed test 'mtime set correctly' # at t/utime.t line 45. # got: '2.2222221' # expected: '2.2222222' # Failed test 'File 1 atime set correctly' # at t/utime.t line 55. # got: '1.111111' # expected: '1.1111111' # Failed test 'File 1 mtime set correctly' # at t/utime.t line 56. # got: '2.2222221' # expected: '2.2222222' # Failed test 'File 2 atime set correctly' # at t/utime.t line 60. # got: '1.111111' # expected: '1.1111111' # Failed test 'File 2 mtime set correctly' # at t/utime.t line 61. # got: '2.2222221' # expected: '2.2222222' # Looks like you failed 8 tests of 18. dist/Time-HiRes/t/utime ........................................ FAILED at test 2 dist/XSLoader/t/XSLoader ....................................... ok ...snip... ext/POSIX/t/export ............................................. ok # Failed test 'trunc 2.75' # at t/math.t line 127. # got: '3' # expected: '2' # Failed test 'trunc -2.75' # at t/math.t line 128. # got: '-3' # expected: '-2' # Failed test 'nan (trunc) + getpayload' # at t/math.t line 237. # got: '1235' # expected: '1234' # Looks like you failed 3 tests of 138. ext/POSIX/t/math ............................................... FAILED at test 99 ext/POSIX/t/posix .............................................. ok ...snip... lib/warnings ................................................... ok ../dist/Time-HiRes/t/utime.t ../ext/POSIX/t/math.t Failed 2 tests out of 2390, 99.92% okay. ### Since not all tests were successful, you may want to run some of ...snip... ### in the 't' directory since most (>=80%) of the tests succeeded. Elapsed: 1076 sec u=4.28 s=3.17 cu=436.33 cs=158.86 scripts=2390 tests=919367 ### You may have to set your dynamic library search path, ...snip... ### Bourne-style shells, like bash, ksh, and zsh, respectively. make: *** [GNUmakefile:818: test] Error 1 program finished with exit code 2 elapsedTime=1112.528273 ------------------------------------------------------------------------ Platform summary: cygwin-thread-quadmath Step 0: git > git --version Step 1: patch cygwin.t > patch -p1 -i /home/dcollins/buildbot-patches/lib.cygwin.t.patch Step 2: patch threads.t > patch -p1 -i /home/dcollins/buildbot-patches/op.threads.t.patch Step 3: patch ualarm.t > patch -p1 -i /home/dcollins/buildbot-patches/time.hires.ualarm.patch Step 4: configure > ./Configure -Dusedevel -des '-Doptimize=-O3 -g' -DDEBUGGING -Dusethreads > -Dusequadmath -Accflags=-D_GNU_SOURCE Step 5: compile > make test_prep > Step failed > STDIO follows: > ...skipped 1630 lines... /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:1206: undefined reference to `floorq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:1206:(.text+0x6be): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `floorq' POSIX.o: In function `my_lgamma': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:912: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:912:(.text+0xc47): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:946: undefined reference to `logq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:946:(.text+0xfa2): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `logq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:919: undefined reference to `logq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:919:(.text+0x111b): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `logq' POSIX.o: In function `my_tgamma': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:819: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:819:(.text+0x11c9): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:869: undefined reference to `floorq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:869:(.text+0x136e): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `floorq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:905: undefined reference to `expq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:905:(.text+0x19c2): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `expq' POSIX.o: In function `XS_POSIX_frexp': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2780: undefined reference to `frexpq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2780:(.text+0x2eb9): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `frexpq' POSIX.o: In function `XS_POSIX_modf': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2794: undefined reference to `modfq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2794:(.text+0x339a): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `modfq' POSIX.o: In function `XS_POSIX_issignaling': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2640: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2640:(.text+0x42c4): additional relocation overflows omitted from the output POSIX.o: In function `my_scalbn': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:1101: undefined reference to `ldexpq' POSIX.o: In function `XS_POSIX_jn': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2884: undefined reference to `jnq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2894: undefined reference to `ynq' POSIX.o: In function `XS_POSIX_fpclassify': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2574: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2571: undefined reference to `isinfq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2568: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2568: undefined reference to `isinfq' POSIX.o: In function `my_ilogb': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:788: undefined reference to `logq' POSIX.o: In function `my_hypot': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:771: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:780: undefined reference to `sqrtq' POSIX.o: In function `XS_POSIX_copysign': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2697: undefined reference to `fmodq' POSIX.o: In function `my_fmin': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:736: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:738: undefined reference to `isnanq' POSIX.o: In function `my_fmax': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:723: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:725: undefined reference to `isnanq' POSIX.o: In function `my_fdim': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:707: undefined reference to `isnanq' POSIX.o:/home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:737: more undefined references to `isnanq' follow POSIX.o: In function `my_log2': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:972: undefined reference to `logq' POSIX.o: In function `XS_POSIX_acos': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2428: undefined reference to `floorq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2455: undefined reference to `sinhq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2458: undefined reference to `tanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2479: undefined reference to `y0q' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2310: undefined reference to `acosq' POSIX.o: In function `my_asinh': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:619: undefined reference to `sqrtq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:619: undefined reference to `logq' POSIX.o: In function `XS_POSIX_acos': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2320: undefined reference to `asinq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2330: undefined reference to `atanq' POSIX.o: In function `my_atanh': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:627: undefined reference to `logq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:627: undefined reference to `logq' POSIX.o: In function `my_cbrt': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:636: undefined reference to `powq' POSIX.o: In function `XS_POSIX_acos': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2347: undefined reference to `ceilq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2350: undefined reference to `coshq' POSIX.o: In function `my_erf': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:667: undefined reference to `expq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:667: undefined reference to `expq' POSIX.o: In function `my_exp2': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:685: undefined reference to `powq' POSIX.o: In function `my_expm1': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:699: undefined reference to `expq' POSIX.o: In function `XS_POSIX_acos': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2381: undefined reference to `floorq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2385: undefined reference to `j0q' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2392: undefined reference to `j1q' POSIX.o: In function `my_log1p': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:961: undefined reference to `logq' POSIX.o: In function `my_log2': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:972: undefined reference to `logq' POSIX.o: In function `XS_POSIX_acos': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2461: undefined reference to `tanhq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2487: undefined reference to `y1q' POSIX.o: In function `my_cbrt': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:636: undefined reference to `powq' collect2: error: ld returned 1 exit status make[1]: Leaving directory '/home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX' make[1]: *** [Makefile:477: ../../lib/auto/POSIX/POSIX.dll] Error 1 Unsuccessful make(ext/POSIX): code=512 at make_ext.pl line 569. make: *** [GNUmakefile:603: lib/auto/POSIX/POSIX.dll] Error 2 program finished with exit code 2 elapsedTime=294.674321 ------------------------------------------------------------------------ Platform summary: win64-mingww64-6.1.0-win32-sjlj-ld Step 0: git > git --version Step 1: shell > C:\cygwin64\bin\patch -i > C:\cygwin64\home\dcollins\buildbot-patches\makefile.64.6.1.0.win32.sjlj.ld.mk.patch > win32\makefile.mk Step 2: rt 128631 > C:\cygwin64\bin\patch -p1 -l --binary -i > C:\cygwin64\home\dcollins\buildbot-patches\0001-RT-128631.patch Step 3: patch failing tests > C:\cygwin64\bin\patch -p1 -l --binary -i > C:\cygwin64\home\dcollins\buildbot-patches\test.failures.on.win32.patch Step 4: compile > dmake Step 5: test > dmake test > Step failed > STDIO follows: ...snip... set PERL_STATIC_EXT=Win32CORE && \ cd ..\t && perl.exe harness base/cond.t ........................................................ ok ...snip... re/subst_wamp.t .................................................... ok # Failed to start watchdog # Insecure $ENV{PATH} while running with -T switch at ./test.pl line 1638. re/substT.t ........................................................ ok ...snip... op/override.t ...................................................... ok op/pack.t .......................................................... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 14245/14712 subtests op/packagev.t ...................................................... ok ...snip... perf/speed.t ....................................................... ok # Failed to start watchdog # Insecure $ENV{PATH} while running with -T switch at ./test.pl line 1638. perf/taint.t ....................................................... ok ...snip... ../cpan/AutoLoader/t/02AutoSplit.t ................................. ok -e syntax OK -e syntax OK -e syntax OK -e syntax OK -e syntax OK -e syntax OK tmp.pl syntax OK ../cpan/B-Debug/t/debug.t .......................................... ok ...snip... ../cpan/ExtUtils-MakeMaker/t/dir_target.t .......................... ok Use of uninitialized value in concatenation (.) or string at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/ExtUtils/MM_Win32.pm line 146. ../cpan/ExtUtils-MakeMaker/t/echo.t ................................ ok ...snip... ../cpan/Pod-Simple/t/encod04.t ..................................... ok # parser guessed wrong encoding expected 'CP1252' got 'UTF-8' ../cpan/Pod-Simple/t/end_over.t .................................... ok ...snip... ../cpan/Term-Cap/test.pl ........................................... skipped: no termcap available to test The system cannot find the path specified. ../cpan/Test-Harness/t/aggregator.t ................................ ok ...snip... ../cpan/Test-Harness/t/compat/env.t ................................ ok Note: Cannot run tests in color: Can't locate Win32/Console.pm ../cpan/Test-Harness/t/compat/env_opts.t ........................... ok ...snip... ../cpan/Test-Simple/t/Legacy/c_flag.t .............................. ok ../cpan/Test-Simple/t/Legacy/capture.t ............................. ok ...snip... ../cpan/Test-Simple/t/Test2/acceptance/try_it_fork.t ............... ok Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. ../cpan/Test-Simple/t/Test2/acceptance/try_it_no_plan.t ............ ok ...snip... ../dist/Exporter/t/warn.t .......................................... ok dlltool: Unable to open base-file: compilet.base dlltool: Unable to open base-file: compilet.base ../dist/ExtUtils-CBuilder/t/00-have-compiler.t ..................... ok ...snip... ../dist/ExtUtils-CBuilder/t/02-link.t .............................. skipped: link_executable() is not implemented yet on MSWin32 compilet.exp:fake:(.edata+0x3c): undefined reference to `boot_compilet' collect2.exe: error: ld returned 1 exit status compilet.exp:fake:(.edata+0x3c): undefined reference to `boot_compilet' collect2.exe: error: ld returned 1 exit status t\cplust.exp:fake:(.edata+0x38): undefined reference to `boot_cplust' collect2.exe: error: ld returned 1 exit status t\cplust.exp:fake:(.edata+0x38): undefined reference to `boot_cplust' collect2.exe: error: ld returned 1 exit status ../dist/ExtUtils-CBuilder/t/03-cplusplus.t ......................... ok ...snip... ../dist/PathTools/t/cwd.t .......................................... ok skip() needs to know $how_many tests are in the block at t/cwd.t line 251 ../dist/PathTools/t/Functions.t .................................... ok ...snip... ../dist/PathTools/t/Functions.t .................................... ok Use of uninitialized value $_[0] in string eq at ../../lib/File/Spec/Win32.pm line 139. Use of uninitialized value $_[0] in string eq at ../../lib/File/Spec/Win32.pm line 139. ../dist/PathTools/t/rel2abs2rel.t .................................. ok ...snip... ../ext/File-Find/t/find.t .......................................... ok VOLUME = W: ../ext/File-Find/t/taint.t ......................................... ok ...snip... ../ext/POSIX/t/export.t ............................................ ok ../ext/POSIX/t/math.t .............................................. Dubious, test returned 255 (wstat 65280, 0xff00) All 28 subtests passed ../ext/POSIX/t/posix.t ............................................. ok ...snip... ../lib/warnings.t .................................................. ok Test Summary Report ------------------- op/pack.t (Wstat: 65280 Tests: 467 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 14712 tests but ran 467. ../cpan/Archive-Tar/t/09_roundtrip.t (Wstat: 0 Tests: 7 Failed: 0) TODO passed: 1, 4, 6 ../ext/IPC-Open3/t/IPC-Open3.t (Wstat: 0 Tests: 45 Failed: 0) TODO passed: 25 ../ext/POSIX/t/math.t (Wstat: 65280 Tests: 28 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output Files=2500, Tests=862965, 795 wallclock secs (37.94 usr + 2.25 sys = 40.19 CPU) Result: FAIL dmake: Error code 130, while making 'test' program finished with exit code 255 elapsedTime=807.128000
