This is an automated smoke report for branch blead. Patch: 0b1d8e2d68e53d65f46c0455f536bce7f0797bdd
This report is automatically generated from smoke tests that are automatically run. The logs below have been trimmed in an attempt to minimize the size of this message. The Windows smokers are built with dmake, and the Makefile.mk is modified using a patch. Additionally, several patches are applied to silence tests that fail, especially ones that fail intermittently. (Still working on a few of those.) The patches are all available at the following URL: https://github.com/dcollinsn/perl5-smokers-config Additional logging information may be available by contacting the operator of this machine at [email protected]. Feedback, requests, and suggested configurations are welcome. Information about this revision of perl: Branch: blead Patch: 0b1d8e2d68e53d65f46c0455f536bce7f0797bdd Author: Father Chrysostomos <[email protected]> Commit summary: embed.fnc: sv_copypv is still API This commit removed the A flag, causing the documentation to move from perlapi to perlintern: commit 4bac9ae47b5ad7845a24e26b0e95609805de688a Author: Chip Salzenberg <[email protected]> Date: Fri Jun 22 15:18:18 2012 -0700 Magic flags harmonization. But it is still API, even though it is implemented as a macro (and a mathomly function). (This is one reason why checking in generated files can be helpful. It avoids mistakes like this by making them more visible.) Note, however, that this smoker does not build every commit - it condenses repeated commits within a few minutes of each other. Check the previous smoke report from this address against this branch to start your bisect. ======================================================================== SUMMARY ======================================================================== It appears that this test has failed, unexpectedly, on several platforms. Here is a list of those platforms. The test results are shown below. cygwin-thread-ld linux-debug-thread-ld win64-mingww64-6.1.0-win32-sjlj-ld Tests on the following platforms failed, but at least one test failure was expected on these platforms. Review the test failures to ensure that there are no new or unexpected failures, but it is normal to have several Cygwin and Windows builders here. cygwin-thread-quadmath That leaves the following platforms on which the build was successful: cygwin-base cygwin-thread-debug linux-base linux-debug-mymalloc linux-debug-thread linux-debug-thread-quadmath linux-static win32-mingww64-6.1.0 win64-mingww64-6.1.0 win64-mingww64-6.1.0-win32-sjlj ======================================================================== BEGIN UNEXPECTED FAILURES ======================================================================== ------------------------------------------------------------------------ Platform summary: cygwin-thread-ld Step 0: git > git --version Step 1: patch cygwin.t > patch -p1 -i /home/dcollins/buildbot-patches/lib.cygwin.t.patch Step 2: patch threads.t > patch -p1 -i /home/dcollins/buildbot-patches/op.threads.t.patch Step 3: patch ualarm.t > patch -p1 -i /home/dcollins/buildbot-patches/time.hires.ualarm.patch Step 4: configure > ./Configure -Dusedevel -des '-Doptimize=-O3 -g' -Dusethreads -Duselongdouble > -Accflags=-D_GNU_SOURCE -Alibswanted=cygwin Step 5: compile > make test_prep Step 6: perl -V > ./perl -Ilib -V Step 7: treesize > du -s -k . Step 8: test > make test > Step failed > STDIO follows: make test in dir /home/dcollins/buildbot/cygwin1/cygwin-thread-ld/build (timeout 1200 secs) watching logfiles {} argv: ['make', 'test'] environment: !::=::\ ALLUSERSPROFILE=C:\ProgramData APPDATA=C:\Users\dcollins\AppData\Roaming COMMONPROGRAMFILES=C:\Program Files\Common Files COMSPEC=C:\Windows\system32\cmd.exe CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files CommonProgramW6432=C:\Program Files\Common Files EXECIGNORE=*.dll HOME=/home/dcollins HOMEDRIVE=C: LANG=en_US.UTF-8 LOCALAPPDATA=C:\Users\dcollins\AppData\Local NUMBER_OF_PROCESSORS=8 OLDPWD=/home/dcollins/perl OS=Windows_NT PROCESSOR_ARCHITECTURE=AMD64 PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 94 Stepping 3, GenuineIntel PROCESSOR_LEVEL=6 PROCESSOR_REVISION=5e03 PROFILEREAD=true PROGRAMFILES=C:\Program Files PUBLIC=C:\Users\Public PWD=/home/dcollins/buildbot/cygwin1/cygwin-thread-ld/build ProgramData=C:\ProgramData ProgramFiles(x86)=C:\Program Files (x86) ProgramW6432=C:\Program Files SESSIONNAME=Console SHELL=/bin/bash SHLVL=1 SYSTEMDRIVE=C: SYSTEMROOT=C:\Windows TEMP=/tmp TERM=xterm TMP=/tmp TZ=America/New_York USER=dcollins USERNAME=dcollins USERPROFILE=C:\Users\dcollins WINDIR=C:\Windows _=/usr/bin/buildslave asl.log=Destination=file using PTY: False ...snip... cd t && (rm -f perl.exe; /usr/bin/ln.exe -s ../perl.exe perl.exe) PATH=/home/dcollins/buildbot/cygwin1/cygwin-thread-ld/build:.:/usr/local/bin:/usr/bin:/cygdrive/c/Perl64/site/bin:/cygdrive/c/Perl64/bin:/cygdrive/c/ProgramData/Oracle/Java/javapath:/cygdrive/c/Windows/system32:/cygdrive/c/Windows:/cygdrive/c/Windows/System32/Wbem:/cygdrive/c/Windows/System32/WindowsPowerShell/v1.0:/cygdrive/c/Program\ Files\ \(x86\)/NVIDIA\ Corporation/PhysX/Common:/cygdrive/c/Users/dcollins/AppData/Local/Programs/MiKTeX\ 2.9/miktex/bin:/bin:/usr/local:/etc:/usr/lib:/lib:/sbin:/usr/sbin:/usr/libexec ./runtests choose t/base/cond .................................................... ok ...snip... t/op/sprintf ................................................... ok # Failed test 1489 - at op/sprintf2.t line 807 # got "0x8.4p-3" # expected "0x1.08p+0" # Failed test 1490 - at op/sprintf2.t line 808 # got "0x8.4p-3" # expected "0x1.0p+0" # Failed test 1491 - [rt.perl.org \#128888] at op/sprintf2.t line 809 # got "0x8p-3" # expected "0x1p+0" # Failed test 1492 - [rt.perl.org \#128889] at op/sprintf2.t line 812 # got "0x8.4p-3" # expected "0x1.08p+0" # Failed test 1493 - at op/sprintf2.t line 815 # got "0x8.cp-3" # expected "0x1.18p+0" # Failed test 1494 - at op/sprintf2.t line 816 # got "0x8.4p-3" # expected "0x1.0p+0" # Failed test 1495 - [rt.perl.org \#128890] at op/sprintf2.t line 817 # got "0x8.cp-3" # expected "0x1.2p+0" # Failed test 1496 - at op/sprintf2.t line 818 # got "0x9.4p-3" # expected "0x1.2p+0" # Failed test 1497 - at op/sprintf2.t line 819 # got "0x9.cp-3" # expected "0x1.4p+0" # Failed test 1498 - at op/sprintf2.t line 820 # got "0xa.4p-3" # expected "0x1.4p+0" # Failed test 1499 - at op/sprintf2.t line 821 # got "0xa.cp-3" # expected "0x1.6p+0" # Failed test 1500 - at op/sprintf2.t line 822 # got "0xb.4p-3" # expected "0x1.6p+0" # Failed test 1501 - at op/sprintf2.t line 823 # got "0xb.cp-3" # expected "0x1.8p+0" # Failed test 1502 - at op/sprintf2.t line 824 # got "0xc.4p-3" # expected "0x1.8p+0" # Failed test 1503 - at op/sprintf2.t line 825 # got "0xc.cp-3" # expected "0x1.ap+0" # Failed test 1504 - at op/sprintf2.t line 826 # got "0xd.4p-3" # expected "0x1.ap+0" # Failed test 1505 - at op/sprintf2.t line 827 # got "0xd.cp-3" # expected "0x1.cp+0" # Failed test 1506 - at op/sprintf2.t line 828 # got "0xe.4p-3" # expected "0x1.cp+0" # Failed test 1507 - at op/sprintf2.t line 829 # got "0xe.cp-3" # expected "0x1.ep+0" # Failed test 1508 - at op/sprintf2.t line 830 # got "0xf.4p-3" # expected "0x1.ep+0" # Failed test 1509 - at op/sprintf2.t line 831 # got "0xf.cp-3" # expected "0x2.0p+0" # Failed test 1510 - at op/sprintf2.t line 833 # got "0x8.8p-3" # expected "0x1.1p+0" # Failed test 1511 - at op/sprintf2.t line 834 # got "0x8.cp-3" # expected "0x1.1p+0" # Failed test 1512 - at op/sprintf2.t line 835 # got "0x8.cp-3" # expected "0x1.2p+0" # Failed test 1513 - at op/sprintf2.t line 836 # got "0x9.0p-3" # expected "0x1.2p+0" # Failed test 1514 - at op/sprintf2.t line 838 # got "0x0.00p-3" # expected "0x2.00p+0" # Failed test 1515 - at op/sprintf2.t line 839 # got "0x0.00p+0" # expected "0x2.00p+3" # Failed test 1516 - at op/sprintf2.t line 842 # got "0x00000000000000cp-3" # expected "0x0000000000001.8p+0" # Failed test 1517 - [rt.perl.org \#128893] at op/sprintf2.t line 843 # got "-0x0000000000000cp-3" # expected "-0x000000000001.8p+0" # Failed test 1518 - [rt.perl.org \#128893] at op/sprintf2.t line 844 # got "+0x0000000000000cp-3" # expected "+0x000000000001.8p+0" # Failed test 1519 - [rt.perl.org \#128893] at op/sprintf2.t line 845 # got " 0x0000000000000cp-3" # expected " 0x000000000001.8p+0" # Failed test 1520 - at op/sprintf2.t line 846 # got " -0xcp-3" # expected " -0x1.8p+0" # Failed test 1521 - at op/sprintf2.t line 847 # got " +0xcp-3" # expected " +0x1.8p+0" # Failed test 1522 - at op/sprintf2.t line 848 # got " 0xcp-3" # expected " 0x1.8p+0" t/op/sprintf2 .................................................. FAILED at test 1489 t/op/srand ..................................................... ok ...snip... t/op/sysio ..................................................... ok # shmget failed: Function not implemented # msgget failed t/op/taint ..................................................... ok ...snip... cpan/ExtUtils-MakeMaker/t/MM_BeOS .............................. skipped skip() needs to know $how_many tests are in the block at t/MM_Cygwin.t line 119 cpan/ExtUtils-MakeMaker/t/MM_Cygwin ............................ ok ...snip... cpan/IPC-Cmd/t/03_run-forked ................................... ok # # It may be that the cygserver service isn't running. # # You also may have to set the CYGWIN environment variable # to 'server' before running the test suite: # # export CYGWIN=server # cpan/IPC-SysV/t/ipcsysv ........................................ ok ...snip... cpan/Pod-Simple/t/encod03 ...................................... ok # parser guessed wrong encoding expected 'CP1252' got 'UTF-8' cpan/Pod-Simple/t/encod04 ...................................... ok ...snip... cpan/Test-Simple/t/Legacy/Builder/try .......................... ok cpan/Test-Simple/t/Legacy/c_flag ............................... ok ...snip... dist/Time-HiRes/t/tv_interval .................................. ok skip() needs to know $how_many tests are in the block at t/ualarm.t line 102 dist/Time-HiRes/t/ualarm ....................................... ok ...snip... dist/Time-HiRes/t/usleep ....................................... ok # Failed test 'atime set correctly' # at t/utime.t line 35. # got: '1.111111' # expected: '1.1111111' # Failed test 'mtime set correctly' # at t/utime.t line 36. # got: '2.2222221' # expected: '2.2222222' # Failed test 'atime set correctly' # at t/utime.t line 44. # got: '1.111111' # expected: '1.1111111' # Failed test 'mtime set correctly' # at t/utime.t line 45. # got: '2.2222221' # expected: '2.2222222' # Failed test 'File 1 atime set correctly' # at t/utime.t line 55. # got: '1.111111' # expected: '1.1111111' # Failed test 'File 1 mtime set correctly' # at t/utime.t line 56. # got: '2.2222221' # expected: '2.2222222' # Failed test 'File 2 atime set correctly' # at t/utime.t line 60. # got: '1.111111' # expected: '1.1111111' # Failed test 'File 2 mtime set correctly' # at t/utime.t line 61. # got: '2.2222221' # expected: '2.2222222' # Looks like you failed 8 tests of 18. dist/Time-HiRes/t/utime ........................................ FAILED at test 2 dist/XSLoader/t/XSLoader ....................................... ok ...snip... ext/POSIX/t/export ............................................. ok # Failed test 'trunc 2.75' # at t/math.t line 127. # got: '3' # expected: '2' # Failed test 'trunc -2.75' # at t/math.t line 128. # got: '-3' # expected: '-2' # Failed test 'nan (trunc) + getpayload' # at t/math.t line 237. # got: '1235' # expected: '1234' # Looks like you failed 3 tests of 138. ext/POSIX/t/math ............................................... FAILED at test 99 ext/POSIX/t/posix .............................................. ok ...snip... lib/warnings ................................................... ok ../dist/Time-HiRes/t/utime.t ../ext/POSIX/t/math.t op/sprintf2.t Failed 3 tests out of 2390, 99.87% okay. ### Since not all tests were successful, you may want to run some of ...snip... ### in the 't' directory since most (>=80%) of the tests succeeded. Elapsed: 1480 sec u=7.34 s=4.22 cu=527.84 cs=199.69 scripts=2390 tests=919446 ### You may have to set your dynamic library search path, ...snip... ### Bourne-style shells, like bash, ksh, and zsh, respectively. make: *** [GNUmakefile:818: test] Error 1 program finished with exit code 2 elapsedTime=1539.894611 ------------------------------------------------------------------------ Platform summary: linux-debug-thread-ld Step 0: git > git --version Step 1: patch ualarm.t > patch -p1 -i /home/dcollins/toolchain/buildbot-patches/time.hires.ualarm.patch Step 2: patch usleep.t > patch -p1 -i /home/dcollins/toolchain/buildbot-patches/time.hires.usleep.patch Step 3: configure > ./Configure -Dusedevel -des '-Dcc=ccache gcc-6' -DDEBUGGING -Dusethreads > -Duselongdouble Step 4: compile > make test_prep Step 5: perl -V > ./perl -Ilib -V Step 6: treesize > du -s -k . Step 7: test > make test > Step failed > STDIO follows: make test in dir /home/dcollins/toolchain/buildbot/master/workers/bot1/linux-debug-thread-ld/build (timeout 1200 secs) watching logfiles {} argv: ['make', 'test'] environment: AFL_CC=gcc-6 AFL_HARDEN=1 HOME=/home/dcollins LANG=en_US.UTF-8 LOGNAME=dcollins MAIL=/var/mail/dcollins OLDPWD=/home/dcollins/toolchain/buildbot/master PERLBREW_BASHRC_VERSION=0.76 PERLBREW_HOME=/home/dcollins/.perlbrew PERLBREW_ROOT=/home/dcollins/toolchain/perl5 PWD=/home/dcollins/toolchain/buildbot/master/workers/bot1/linux-debug-thread-ld/build SHELL=/bin/bash SHLVL=1 SSH_CLIENT=10.0.0.18 52975 22 SSH_CONNECTION=10.0.0.18 52975 10.0.0.5 22 SSH_TTY=/dev/pts/2 TERM=xterm USER=dcollins XDG_RUNTIME_DIR=/run/user/1000 XDG_SESSION_ID=5 _=/usr/local/bin/buildbot using PTY: False ...snip... cd t && (rm -f perl; /bin/ln -s ../perl perl) ./runtests choose t/base/cond .................................................... ok ...snip... t/op/sprintf ................................................... ok # Failed test 1489 - at op/sprintf2.t line 807 # got "0x8.4p-3" # expected "0x1.08p+0" # Failed test 1490 - at op/sprintf2.t line 808 # got "0x8.4p-3" # expected "0x1.0p+0" # Failed test 1491 - [rt.perl.org \#128888] at op/sprintf2.t line 809 # got "0x8p-3" # expected "0x1p+0" # Failed test 1492 - [rt.perl.org \#128889] at op/sprintf2.t line 812 # got "0x8.4p-3" # expected "0x1.08p+0" # Failed test 1493 - at op/sprintf2.t line 815 # got "0x8.cp-3" # expected "0x1.18p+0" # Failed test 1494 - at op/sprintf2.t line 816 # got "0x8.4p-3" # expected "0x1.0p+0" # Failed test 1495 - [rt.perl.org \#128890] at op/sprintf2.t line 817 # got "0x8.cp-3" # expected "0x1.2p+0" # Failed test 1496 - at op/sprintf2.t line 818 # got "0x9.4p-3" # expected "0x1.2p+0" # Failed test 1497 - at op/sprintf2.t line 819 # got "0x9.cp-3" # expected "0x1.4p+0" # Failed test 1498 - at op/sprintf2.t line 820 # got "0xa.4p-3" # expected "0x1.4p+0" # Failed test 1499 - at op/sprintf2.t line 821 # got "0xa.cp-3" # expected "0x1.6p+0" # Failed test 1500 - at op/sprintf2.t line 822 # got "0xb.4p-3" # expected "0x1.6p+0" # Failed test 1501 - at op/sprintf2.t line 823 # got "0xb.cp-3" # expected "0x1.8p+0" # Failed test 1502 - at op/sprintf2.t line 824 # got "0xc.4p-3" # expected "0x1.8p+0" # Failed test 1503 - at op/sprintf2.t line 825 # got "0xc.cp-3" # expected "0x1.ap+0" # Failed test 1504 - at op/sprintf2.t line 826 # got "0xd.4p-3" # expected "0x1.ap+0" # Failed test 1505 - at op/sprintf2.t line 827 # got "0xd.cp-3" # expected "0x1.cp+0" # Failed test 1506 - at op/sprintf2.t line 828 # got "0xe.4p-3" # expected "0x1.cp+0" # Failed test 1507 - at op/sprintf2.t line 829 # got "0xe.cp-3" # expected "0x1.ep+0" # Failed test 1508 - at op/sprintf2.t line 830 # got "0xf.4p-3" # expected "0x1.ep+0" # Failed test 1509 - at op/sprintf2.t line 831 # got "0xf.cp-3" # expected "0x2.0p+0" # Failed test 1510 - at op/sprintf2.t line 833 # got "0x8.8p-3" # expected "0x1.1p+0" # Failed test 1511 - at op/sprintf2.t line 834 # got "0x8.cp-3" # expected "0x1.1p+0" # Failed test 1512 - at op/sprintf2.t line 835 # got "0x8.cp-3" # expected "0x1.2p+0" # Failed test 1513 - at op/sprintf2.t line 836 # got "0x9.0p-3" # expected "0x1.2p+0" # Failed test 1514 - at op/sprintf2.t line 838 # got "0x0.00p-3" # expected "0x2.00p+0" # Failed test 1515 - at op/sprintf2.t line 839 # got "0x0.00p+0" # expected "0x2.00p+3" # Failed test 1516 - at op/sprintf2.t line 842 # got "0x00000000000000cp-3" # expected "0x0000000000001.8p+0" # Failed test 1517 - [rt.perl.org \#128893] at op/sprintf2.t line 843 # got "-0x0000000000000cp-3" # expected "-0x000000000001.8p+0" # Failed test 1518 - [rt.perl.org \#128893] at op/sprintf2.t line 844 # got "+0x0000000000000cp-3" # expected "+0x000000000001.8p+0" # Failed test 1519 - [rt.perl.org \#128893] at op/sprintf2.t line 845 # got " 0x0000000000000cp-3" # expected " 0x000000000001.8p+0" # Failed test 1520 - at op/sprintf2.t line 846 # got " -0xcp-3" # expected " -0x1.8p+0" # Failed test 1521 - at op/sprintf2.t line 847 # got " +0xcp-3" # expected " +0x1.8p+0" # Failed test 1522 - at op/sprintf2.t line 848 # got " 0xcp-3" # expected " 0x1.8p+0" t/op/sprintf2 .................................................. FAILED at test 1489 t/op/srand ..................................................... ok ...snip... cpan/Pod-Simple/t/encod03 ...................................... ok # parser guessed wrong encoding expected 'CP1252' got 'UTF-8' cpan/Pod-Simple/t/encod04 ...................................... ok ...snip... cpan/Test-Simple/t/Legacy/Builder/try .......................... ok cpan/Test-Simple/t/Legacy/c_flag ............................... ok ...snip... dist/ExtUtils-CBuilder/t/02-link ............................... ok gcc-6: error trying to exec 'cc1plus': execvp: No such file or directory dist/ExtUtils-CBuilder/t/03-cplusplus .......................... skipped ...snip... lib/warnings ................................................... ok op/sprintf2.t Elapsed: 1018 sec u=6.22 s=5.65 cu=459.41 cs=127.70 scripts=2390 tests=918814 Failed 1 test out of 2390, 99.96% okay. ### Since not all tests were successful, you may want to run some of ...snip... ### Bourne-style shells, like bash, ksh, and zsh, respectively. makefile:815: recipe for target 'test' failed make: *** [test] Error 1 program finished with exit code 2 elapsedTime=1043.586041 ------------------------------------------------------------------------ Platform summary: win64-mingww64-6.1.0-win32-sjlj-ld Step 0: git > git --version Step 1: shell > C:\cygwin64\bin\patch -i > C:\cygwin64\home\dcollins\buildbot-patches\makefile.64.6.1.0.win32.sjlj.ld.mk.patch > win32\makefile.mk Step 2: rt 128631 > C:\cygwin64\bin\patch -p1 -l --binary -i > C:\cygwin64\home\dcollins\buildbot-patches\0001-RT-128631.patch Step 3: patch failing tests > C:\cygwin64\bin\patch -p1 -l --binary -i > C:\cygwin64\home\dcollins\buildbot-patches\test.failures.on.win32.patch Step 4: compile > dmake Step 5: test > dmake test > Step failed > STDIO follows: ...snip... set PERL_STATIC_EXT=Win32CORE && \ cd ..\t && perl.exe harness base/cond.t ........................................................ ok ...snip... re/subst_wamp.t .................................................... ok # Failed to start watchdog # Insecure $ENV{PATH} while running with -T switch at ./test.pl line 1638. re/substT.t ........................................................ ok ...snip... op/override.t ...................................................... ok op/pack.t .......................................................... Dubious, test returned 255 (wstat 65280, 0xff00) Failed 14245/14712 subtests op/packagev.t ...................................................... ok ...snip... op/sprintf.t ....................................................... ok op/sprintf2.t ...................................................... Failed 34/1522 subtests (less 34 skipped subtests: 1454 okay) # Failed test 1489 - at op/sprintf2.t line 807 # got "0x8.4p-3" # expected "0x1.08p+0" # Failed test 1490 - at op/sprintf2.t line 808 # got "0x8.4p-3" # expected "0x1.0p+0" # Failed test 1491 - [rt.perl.org \#128888] at op/sprintf2.t line 809 # got "0x8p-3" # expected "0x1p+0" # Failed test 1492 - [rt.perl.org \#128889] at op/sprintf2.t line 812 # got "0x8.4p-3" # expected "0x1.08p+0" # Failed test 1493 - at op/sprintf2.t line 815 # got "0x8.cp-3" # expected "0x1.18p+0" # Failed test 1494 - at op/sprintf2.t line 816 # got "0x8.4p-3" # expected "0x1.0p+0" # Failed test 1495 - [rt.perl.org \#128890] at op/sprintf2.t line 817 # got "0x8.cp-3" # expected "0x1.2p+0" # Failed test 1496 - at op/sprintf2.t line 818 # got "0x9.4p-3" # expected "0x1.2p+0" # Failed test 1497 - at op/sprintf2.t line 819 # got "0x9.cp-3" # expected "0x1.4p+0" # Failed test 1498 - at op/sprintf2.t line 820 # got "0xa.4p-3" # expected "0x1.4p+0" # Failed test 1499 - at op/sprintf2.t line 821 # got "0xa.cp-3" # expected "0x1.6p+0" # Failed test 1500 - at op/sprintf2.t line 822 # got "0xb.4p-3" # expected "0x1.6p+0" # Failed test 1501 - at op/sprintf2.t line 823 # got "0xb.cp-3" # expected "0x1.8p+0" # Failed test 1502 - at op/sprintf2.t line 824 # got "0xc.4p-3" # expected "0x1.8p+0" # Failed test 1503 - at op/sprintf2.t line 825 # got "0xc.cp-3" # expected "0x1.ap+0" # Failed test 1504 - at op/sprintf2.t line 826 # got "0xd.4p-3" # expected "0x1.ap+0" # Failed test 1505 - at op/sprintf2.t line 827 # got "0xd.cp-3" # expected "0x1.cp+0" # Failed test 1506 - at op/sprintf2.t line 828 # got "0xe.4p-3" # expected "0x1.cp+0" # Failed test 1507 - at op/sprintf2.t line 829 # got "0xe.cp-3" # expected "0x1.ep+0" # Failed test 1508 - at op/sprintf2.t line 830 # got "0xf.4p-3" # expected "0x1.ep+0" # Failed test 1509 - at op/sprintf2.t line 831 # got "0xf.cp-3" # expected "0x2.0p+0" # Failed test 1510 - at op/sprintf2.t line 833 # got "0x8.8p-3" # expected "0x1.1p+0" # Failed test 1511 - at op/sprintf2.t line 834 # got "0x8.cp-3" # expected "0x1.1p+0" # Failed test 1512 - at op/sprintf2.t line 835 # got "0x8.cp-3" # expected "0x1.2p+0" # Failed test 1513 - at op/sprintf2.t line 836 # got "0x9.0p-3" # expected "0x1.2p+0" # Failed test 1514 - at op/sprintf2.t line 838 # got "0x0.00p-3" # expected "0x2.00p+0" # Failed test 1515 - at op/sprintf2.t line 839 # got "0x0.00p+0" # expected "0x2.00p+3" # Failed test 1516 - at op/sprintf2.t line 842 # got "0x00000000000000cp-3" # expected "0x0000000000001.8p+0" # Failed test 1517 - [rt.perl.org \#128893] at op/sprintf2.t line 843 # got "-0x0000000000000cp-3" # expected "-0x000000000001.8p+0" # Failed test 1518 - [rt.perl.org \#128893] at op/sprintf2.t line 844 # got "+0x0000000000000cp-3" # expected "+0x000000000001.8p+0" # Failed test 1519 - [rt.perl.org \#128893] at op/sprintf2.t line 845 # got " 0x0000000000000cp-3" # expected " 0x000000000001.8p+0" # Failed test 1520 - at op/sprintf2.t line 846 # got " -0xcp-3" # expected " -0x1.8p+0" # Failed test 1521 - at op/sprintf2.t line 847 # got " +0xcp-3" # expected " +0x1.8p+0" # Failed test 1522 - at op/sprintf2.t line 848 # got " 0xcp-3" # expected " 0x1.8p+0" op/srand.t ......................................................... ok ...snip... perf/speed.t ....................................................... ok # Failed to start watchdog # Insecure $ENV{PATH} while running with -T switch at ./test.pl line 1638. perf/taint.t ....................................................... ok ...snip... ../cpan/AutoLoader/t/02AutoSplit.t ................................. ok -e syntax OK -e syntax OK -e syntax OK -e syntax OK -e syntax OK -e syntax OK ../cpan/B-Debug/t/debug.t .......................................... ok ...snip... ../cpan/B-Debug/t/debug.t .......................................... ok tmp.pl syntax OK ../cpan/CPAN-Meta-Requirements/t/accepts.t ......................... ok ...snip... ../cpan/ExtUtils-MakeMaker/t/dir_target.t .......................... ok Use of uninitialized value in concatenation (.) or string at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/ExtUtils/MM_Win32.pm line 146. ../cpan/ExtUtils-MakeMaker/t/echo.t ................................ ok ...snip... ../cpan/Pod-Simple/t/encod03.t ..................................... ok # parser guessed wrong encoding expected 'CP1252' got 'UTF-8' ../cpan/Pod-Simple/t/encod04.t ..................................... ok ...snip... ../cpan/Term-ANSIColor/t/taint/basic.t ............................. ok The system cannot find the path specified. ../cpan/Term-Cap/test.pl ........................................... skipped: no termcap available to test ...snip... ../cpan/Test-Harness/t/compat/env_opts.t ........................... ok Note: Cannot run tests in color: Can't locate Win32/Console.pm ../cpan/Test-Harness/t/compat/failure.t ............................ ok ...snip... ../cpan/Test-Simple/t/Legacy/buffer.t .............................. ok ../cpan/Test-Simple/t/Legacy/c_flag.t .............................. ok ...snip... ../cpan/Test-Simple/t/Test2/acceptance/try_it_no_plan.t ............ ok Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. Argument "" isn't numeric in numeric comparison (<=>) at W:\buildbot\windows1\win64-mingww64-6_1_0-win32-sjlj-ld\build\lib/Test2/IPC/Driver/Files.pm line 346. ../cpan/Test-Simple/t/Test2/acceptance/try_it_plan.t ............... ok ...snip... ../dist/ExtUtils-CBuilder/t/00-have-compiler.t ..................... ok dlltool: Unable to open base-file: compilet.base dlltool: Unable to open base-file: compilet.base ../dist/ExtUtils-CBuilder/t/01-basic.t ............................. ok ...snip... ../dist/ExtUtils-CBuilder/t/02-link.t .............................. skipped: link_executable() is not implemented yet on MSWin32 compilet.exp:fake:(.edata+0x3c): undefined reference to `boot_compilet' collect2.exe: error: ld returned 1 exit status compilet.exp:fake:(.edata+0x3c): undefined reference to `boot_compilet' collect2.exe: error: ld returned 1 exit status t\cplust.exp:fake:(.edata+0x38): undefined reference to `boot_cplust' collect2.exe: error: ld returned 1 exit status t\cplust.exp:fake:(.edata+0x38): undefined reference to `boot_cplust' collect2.exe: error: ld returned 1 exit status ../dist/ExtUtils-CBuilder/t/03-cplusplus.t ......................... ok ...snip... ../dist/PathTools/t/cwd.t .......................................... ok skip() needs to know $how_many tests are in the block at t/cwd.t line 251 Use of uninitialized value $_[0] in string eq at ../../lib/File/Spec/Win32.pm line 139. Use of uninitialized value $_[0] in string eq at ../../lib/File/Spec/Win32.pm line 139. ../dist/PathTools/t/Functions.t .................................... ok ...snip... ../ext/File-Find/t/find.t .......................................... ok VOLUME = W: ../ext/File-Find/t/taint.t ......................................... ok ...snip... ../ext/POSIX/t/export.t ............................................ ok ../ext/POSIX/t/math.t .............................................. Dubious, test returned 255 (wstat 65280, 0xff00) All 28 subtests passed ../ext/POSIX/t/posix.t ............................................. ok ...snip... ../lib/warnings.t .................................................. ok Test Summary Report ------------------- op/pack.t (Wstat: 65280 Tests: 467 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 14712 tests but ran 467. op/sprintf2.t (Wstat: 0 Tests: 1522 Failed: 34) Failed tests: 1489-1522 ../cpan/Archive-Tar/t/09_roundtrip.t (Wstat: 0 Tests: 7 Failed: 0) TODO passed: 1, 4, 6 ../ext/IPC-Open3/t/IPC-Open3.t (Wstat: 0 Tests: 45 Failed: 0) TODO passed: 25 ../ext/POSIX/t/math.t (Wstat: 65280 Tests: 28 Failed: 0) Non-zero exit status: 255 Parse errors: No plan found in TAP output Files=2500, Tests=863102, 823 wallclock secs (36.99 usr + 2.36 sys = 39.34 CPU) Result: FAIL dmake: Error code 162, while making 'test' program finished with exit code 255 elapsedTime=839.437000 ======================================================================== BEGIN EXPECTED FAILURES ======================================================================== ------------------------------------------------------------------------ Platform summary: cygwin-thread-quadmath Step 0: git > git --version Step 1: patch cygwin.t > patch -p1 -i /home/dcollins/buildbot-patches/lib.cygwin.t.patch Step 2: patch threads.t > patch -p1 -i /home/dcollins/buildbot-patches/op.threads.t.patch Step 3: patch ualarm.t > patch -p1 -i /home/dcollins/buildbot-patches/time.hires.ualarm.patch Step 4: configure > ./Configure -Dusedevel -des '-Doptimize=-O3 -g' -DDEBUGGING -Dusethreads > -Dusequadmath -Accflags=-D_GNU_SOURCE Step 5: compile > make test_prep > Step failed > STDIO follows: > ...skipped 1630 lines... /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:1206: undefined reference to `floorq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:1206:(.text+0x6be): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `floorq' POSIX.o: In function `my_lgamma': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:912: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:912:(.text+0xc47): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:946: undefined reference to `logq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:946:(.text+0xfa2): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `logq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:919: undefined reference to `logq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:919:(.text+0x111b): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `logq' POSIX.o: In function `my_tgamma': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:819: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:819:(.text+0x11c9): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:869: undefined reference to `floorq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:869:(.text+0x136e): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `floorq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:905: undefined reference to `expq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:905:(.text+0x19c2): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `expq' POSIX.o: In function `XS_POSIX_frexp': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2780: undefined reference to `frexpq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2780:(.text+0x2eb9): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `frexpq' POSIX.o: In function `XS_POSIX_modf': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2794: undefined reference to `modfq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2794:(.text+0x339a): relocation truncated to fit: R_X86_64_PC32 against undefined symbol `modfq' POSIX.o: In function `XS_POSIX_issignaling': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2640: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2640:(.text+0x42c4): additional relocation overflows omitted from the output POSIX.o: In function `my_scalbn': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:1101: undefined reference to `ldexpq' POSIX.o: In function `XS_POSIX_jn': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2884: undefined reference to `jnq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2894: undefined reference to `ynq' POSIX.o: In function `XS_POSIX_fpclassify': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2574: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2571: undefined reference to `isinfq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2568: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2568: undefined reference to `isinfq' POSIX.o: In function `my_ilogb': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:788: undefined reference to `logq' POSIX.o: In function `my_hypot': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:771: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:780: undefined reference to `sqrtq' POSIX.o: In function `XS_POSIX_copysign': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2697: undefined reference to `fmodq' POSIX.o: In function `my_fmin': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:736: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:738: undefined reference to `isnanq' POSIX.o: In function `my_fmax': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:723: undefined reference to `isnanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:725: undefined reference to `isnanq' POSIX.o: In function `my_fdim': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:707: undefined reference to `isnanq' POSIX.o:/home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:737: more undefined references to `isnanq' follow POSIX.o: In function `my_log2': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:972: undefined reference to `logq' POSIX.o: In function `XS_POSIX_acos': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2428: undefined reference to `floorq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2455: undefined reference to `sinhq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2458: undefined reference to `tanq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2479: undefined reference to `y0q' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2310: undefined reference to `acosq' POSIX.o: In function `my_asinh': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:619: undefined reference to `sqrtq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:619: undefined reference to `logq' POSIX.o: In function `XS_POSIX_acos': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2320: undefined reference to `asinq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2330: undefined reference to `atanq' POSIX.o: In function `my_atanh': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:627: undefined reference to `logq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:627: undefined reference to `logq' POSIX.o: In function `my_cbrt': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:636: undefined reference to `powq' POSIX.o: In function `XS_POSIX_acos': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2347: undefined reference to `ceilq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2350: undefined reference to `coshq' POSIX.o: In function `my_erf': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:667: undefined reference to `expq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:667: undefined reference to `expq' POSIX.o: In function `my_exp2': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:685: undefined reference to `powq' POSIX.o: In function `my_expm1': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:699: undefined reference to `expq' POSIX.o: In function `XS_POSIX_acos': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2381: undefined reference to `floorq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2385: undefined reference to `j0q' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2392: undefined reference to `j1q' POSIX.o: In function `my_log1p': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:961: undefined reference to `logq' POSIX.o: In function `my_log2': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:972: undefined reference to `logq' POSIX.o: In function `XS_POSIX_acos': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2461: undefined reference to `tanhq' /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:2487: undefined reference to `y1q' POSIX.o: In function `my_cbrt': /home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX/POSIX.xs:636: undefined reference to `powq' collect2: error: ld returned 1 exit status make[1]: Leaving directory '/home/dcollins/buildbot/cygwin1/cygwin-thread-quadmath/build/ext/POSIX' make[1]: *** [Makefile:477: ../../lib/auto/POSIX/POSIX.dll] Error 1 Unsuccessful make(ext/POSIX): code=512 at make_ext.pl line 569. make: *** [GNUmakefile:603: lib/auto/POSIX/POSIX.dll] Error 2 program finished with exit code 2 elapsedTime=303.342807
