Automated smoke report for 5.14.0 patch 
b4ffc3db31e268adb50c44bab9b628dc619f1e83 v5.13.11-440-gb4ffc3d
openbsd64.tony.develop-help.com: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz (2953 
MHz) (amd64/2 cpu)
    on        openbsd - 4.7
    using     cc version 3.3.5 (propolice)
    smoketime 3 hours 53 minutes (average 29 minutes 14 seconds)

Summary: FAIL(FM)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:       - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.13.11-440-gb4ffc3d  Configuration (common) none
----------- ---------------------------------------------------------
F O O O     
F O F O     -Duse64bitint
F F F F     -Duseithreads
F F M -     -Duseithreads -Duse64bitint
| | | +----- PERLIO = perlio -DDEBUGGING
| | +------- PERLIO = stdio  -DDEBUGGING
| +--------- PERLIO = perlio
+----------- PERLIO = stdio


Locally applied patches:
    RC0
    uncommitted-changes
    SMOKEb4ffc3db31e268adb50c44bab9b628dc619f1e83

Testsuite was run only with 'harness' and HARNESS_OPTIONS=j3

Failures: (common-args) none
[stdio] 
[stdio] -Duse64bitint
[stdio] -DDEBUGGING -Duse64bitint
../lib/Benchmark.t..........................................FAILED
    15
    Non-zero exit status: 1

[stdio/perlio] -Duseithreads
[perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitint
../t/op/sigdispatch.t.......................................FAILED
    Bad plan.  You planned 15 tests but ran 0.

[stdio] -DDEBUGGING -Duseithreads
../t/op/sigdispatch.t.......................................FAILED
    Bad plan.  You planned 15 tests but ran 0.
../cpan/Math-Complex/t/Complex.t............................FAILED

[minitest] -DDEBUGGING -Duseithreads -Duse64bitint
    t/run/fresh_perl................FAILED at test 75
    t/io/utf8.......................FAILED--expected 55 tests, saw 52
    t/re/charset....................FAILED--no leader found
    t/re/pat........................FAILED at test 390
    t/re/pat_special_cc.............FAILED--expected 9 tests, saw 0
    t/re/reg_mesg...................FAILED at test 106
    t/re/reg_posixcc................FAILED at test 1
    t/re/regexp.....................FAILED at test 118
    t/re/regexp_noamp...............FAILED at test 118
    t/re/regexp_notrie..............FAILED at test 118
    t/re/regexp_qr..................FAILED at test 118
    t/re/regexp_qr_embed............FAILED at test 118
    t/re/regexp_trielist............FAILED at test 118
    t/re/uniprops...................FAILED--no leader found
    t/op/die........................FAILED at test 14
    t/op/lc.........................FAILED--expected 93 tests, saw 25
    t/op/lc_user....................FAILED--expected 5 tests, saw 0
    t/op/mkdir......................FAILED--no leader found
    t/op/pack.......................FAILED--no leader found
    t/op/sprintf2...................FAILED at test 1320
    t/op/turkish....................FAILED at test 1
    t/op/utfhash....................FAILED--no leader found
    t/op/utftaint...................FAILED at test 87
    t/uni/cache.....................FAILED at test 1
    t/uni/class.....................FAILED at test 1
    t/uni/fold......................FAILED at test 213
    t/uni/lower.....................FAILED--no leader found
    t/uni/overload..................FAILED at test 12
    t/uni/title.....................FAILED--no leader found
    t/uni/upper.....................FAILED--no leader found

Compiler messages(gcc):
/tmp//cca4rfx1.o(.text+0x4c): In function `main':
/tmp//ccHHimPu.o(.text+0x78): In function `main':
/tmp//cc3QQ884.o(.text+0x9d): In function `xxx':
/tmp//ccqLR2yR.o(.text+0xc4): In function `main':
malloc.c: In function `getpages':
malloc.c:1694: warning: comparison between signed and unsigned
toke.c: In function `Perl_yylex':
toke.c:4796: warning: comparison between signed and unsigned
sv.o(.text+0x2462): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x2d0): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0x2462): In function `Perl_sv_2pv_flags':
<command line>:12:1: warning: "TIME_HIRES_STAT" redefined
<command line>:11:1: warning: this is the location of the previous definition
<command line>:13:1: warning: "TIME_HIRES_STAT" redefined
<command line>:12:1: warning: this is the location of the previous definition
util.o(.text+0x1a9): In function `savestr':
str.o(.text+0x70): In function `str_2ptr':
../libperl.a(sv.o)(.text+0x2462): In function `Perl_sv_2pv_flags':
/tmp//ccG2GVYM.o(.text+0x4c): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:20: warning: sprintf() is often 
misused, please use snprintf()
/tmp//ccqCA7Bo.o(.text+0x78): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: sprintf() is often 
misused, please use snprintf()
/tmp//ccfD4gLi.o(.text+0x9d): In function `xxx':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:29: warning: vsprintf() is often 
misused, please use vsnprintf()
/tmp//ccoJczbK.o(.text+0xc4): In function `main':
/home/perlsmoke/smoke-me/perl-current/UU/try.c:52: warning: sprintf() is often 
misused, please use snprintf()
sv.o(.text+0x105e7): In function `Perl_sv_2pv_flags':
/home/perlsmoke/smoke-me/perl-current/sv.c:2762: warning: sprintf() is often 
misused, please use snprintf()
libperl.a(DynaLoader.o)(.text+0x69d): In function `XS_DynaLoader_dl_load_file':
/home/perlsmoke/smoke-me/perl-current/ext/DynaLoader/DynaLoader.xs:173: 
warning: strcat() is almost always misused, please use strlcat()
libperl.a(sv.o)(.text+0x105e7): In function `Perl_sv_2pv_flags':
<command line>:14:1: warning: "TIME_HIRES_STAT" redefined
<command line>:13:1: warning: this is the location of the previous definition
<command line>:15:1: warning: "TIME_HIRES_STAT" redefined
<command line>:14:1: warning: this is the location of the previous definition
util.o(.text+0x2a9): In function `savestr':
/home/perlsmoke/smoke-me/perl-current/x2p/util.c:147: warning: strcpy() is 
almost always misused, please use strlcpy()
str.o(.text+0x95): In function `str_2ptr':
/home/perlsmoke/smoke-me/perl-current/x2p/str.c:32: warning: sprintf() is often 
misused, please use snprintf()
../libperl.a(sv.o)(.text+0x105e7): In function `Perl_sv_2pv_flags':
/tmp//ccJqzsmH.o(.text+0x4c): In function `main':
/tmp//ccaqYBWO.o(.text+0x78): In function `main':
/tmp//ccOGV5ao.o(.text+0x9d): In function `xxx':
/tmp//cc1qhuQU.o(.text+0xc4): In function `main':
/tmp//cc7FRlYW.o(.text+0x4c): In function `main':
/tmp//ccWuiuq3.o(.text+0x78): In function `main':
/tmp//ccB7YHNz.o(.text+0x9d): In function `xxx':
/tmp//ccCFBzKO.o(.text+0xc4): In function `main':
/tmp//ccbp307X.o(.text+0x4c): In function `main':
/tmp//ccb5fNll.o(.text+0x78): In function `main':
/tmp//ccpGmmTf.o(.text+0x9d): In function `xxx':
/tmp//cchUVyzR.o(.text+0xc4): In function `main':
sv.o(.text+0x27a6): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x31b): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0x27a6): In function `Perl_sv_2pv_flags':
../libperl.a(sv.o)(.text+0x27a6): In function `Perl_sv_2pv_flags':
/tmp//ccLRjlpA.o(.text+0x4c): In function `main':
/tmp//cckGDZzf.o(.text+0x78): In function `main':
/tmp//ccViWw1V.o(.text+0x9d): In function `xxx':
/tmp//cc7E3d36.o(.text+0xc4): In function `main':
sv.o(.text+0x109e1): In function `Perl_sv_2pv_flags':
libperl.a(DynaLoader.o)(.text+0x6fa): In function `XS_DynaLoader_dl_load_file':
libperl.a(sv.o)(.text+0x109e1): In function `Perl_sv_2pv_flags':
<command line>:16:1: warning: "TIME_HIRES_STAT" redefined
<command line>:15:1: warning: this is the location of the previous definition
../libperl.a(sv.o)(.text+0x109e1): In function `Perl_sv_2pv_flags':
/tmp//ccUihfDI.o(.text+0x4c): In function `main':
/tmp//cci0FAOe.o(.text+0x78): In function `main':
/tmp//ccIttm9t.o(.text+0x9d): In function `xxx':
/tmp//cc1TdoId.o(.text+0xc4): In function `main':
/tmp//ccbhy8l2.o(.text+0x4c): In function `main':
/tmp//ccUxazuu.o(.text+0x78): In function `main':
/tmp//ccxYHVrs.o(.text+0x9d): In function `xxx':
/tmp//cc1NIvKD.o(.text+0xc4): In function `main':

-- 
Report by Test::Smoke v1.44 build 1285 running on perl 5.10.1
(Reporter v0.035 / Smoker v0.045)

Logs at http://perl.develop-help.com/reports/
Branch: origin/blead
Configuration: default

Reply via email to