Hi,
AFAICT your card hasn't been on the list of supported chips since the
AMDGPU-PRO 14.04 driver. This was discussed on the darktable mailing
list two years ago
(https://www.mail-archive.com/darktable-user@lists.darktable.org/msg02791.html).
If you want to run Ubuntu 18.04.3 with the Hardware Enablement kernel
(5.0.x), you need the AMDGPU-PRO 19.30 driver, BTW.
cheers,
Simon
On 19.11.19 04:27, Jozef Dassen wrote:
After a lot of struggle I managed to install amdgpu drivers on my Ubuntu
18.04.
It did not work with kernel 5.0 but going back to kernel 4.15 worked
fine. Flawless installation of amdgpu 18.40.
Then I ran darktable-cltest (darktable 3.0 rc1) and got the following
result:
0.037740 [opencl_init] opencl related configuration options:
0.037752 [opencl_init]
0.037755 [opencl_init] opencl: 1
0.037757 [opencl_init] opencl_library: ''
0.037759 [opencl_init] opencl_memory_requirement: 500
0.037761 [opencl_init] opencl_memory_headroom: 0
0.037763 [opencl_init] opencl_device_priority: '*/!0,*/*/*'
0.037784 [opencl_init] opencl_mandatory_timeout: 200
0.037786 [opencl_init] opencl_size_roundup: 16
0.037788 [opencl_init] opencl_async_pixelpipe: 0
0.037790 [opencl_init] opencl_synch_cache: active module
0.037794 [opencl_init] opencl_number_event_handles: 25
0.037797 [opencl_init] opencl_micro_nap: 1000
0.037800 [opencl_init] opencl_use_pinned_memory: 0
0.037802 [opencl_init] opencl_use_cpu_devices: 0
0.037804 [opencl_init] opencl_avoid_atomics: 1
0.037806 [opencl_init]
0.037962 [opencl_init] found opencl runtime library 'libOpenCL'
0.037980 [opencl_init] opencl library 'libOpenCL' found on your system
and loaded
0.170870 [opencl_init] found 1 platform
0.170885 [opencl_init] found 1 device
0.170923 [opencl_init] device 0 `Capeverde' supports image sizes of
16384 x 16384
0.170927 [opencl_init] device 0 `Capeverde' allows GPU memory
allocations of up to 1053MB
[opencl_init] device 0: Capeverde
GLOBAL_MEM_SIZE: 1472MB
MAX_WORK_GROUP_SIZE: 256
MAX_WORK_ITEM_DIMENSIONS: 3
MAX_WORK_ITEM_SIZES: [ 1024 1024 1024 ]
DRIVER_VERSION: 2686.5
DEVICE_VERSION: OpenCL 1.2 AMD-APP (2686.5)
0.171329 [opencl_init] could not create command queue for device 0: -6
0.171373 [opencl_init] FINALLY: opencl is NOT AVAILABLE on this system.
0.171376 [opencl_init] initial status of opencl enabled flag is OFF.
my display is:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Venus XTX [Radeon HD 8890M / R9 M275X/M375X] (rev 83) (prog-if
00 [VGA controller])
Subsystem: Dell Venus XTX [Radeon HD 8890M / R9 M275X/M375X]
Flags: bus master, fast devsel, latency 0, IRQ 128
Memory at b0000000 (64-bit, prefetchable) [size=256M]
Memory at de300000 (64-bit, non-prefetchable) [size=256K]
I/O ports at e000 [size=256]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Capabilities: [200] #15
Capabilities: [270] #19
Kernel driver in use: amdgpu
Kernel modules: radeon, amdgpu
I have fresh Ubuntu 18.04-1 installation on a sytem with 64Gbyte RAM.
Only Firefox is running. So no resource problems.
I have deferred all other installations until I can get darktable with
openCL running. This is a sine-qua-non for me.
So no luck... Again........
Any ideas what could be the problem ??
darktablerc parameters:
opencl=true
opencl_async_pixelpipe=false
opencl_avoid_atomics=true
opencl_checksum=
opencl_device_priority=*/!0,*/*/*
opencl_disable_drivers_blacklist=false
opencl_library=
opencl_mandatory_timeout=200
opencl_memory_headroom=0
opencl_memory_requirement=500
opencl_micro_nap=1000
opencl_number_event_handles=25
opencl_scheduling_profile=default
opencl_size_roundup=16
opencl_synch_cache=active module
opencl_use_cpu_devices=false
opencl_use_pinned_memory=false
Regards, Jozef Dassen
___________________________________________________________________________
darktable developer mailing list to unsubscribe send a mail to
darktable-dev+unsubscr...@lists.darktable.org
___________________________________________________________________________
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
