oh, thanks. changed it for the e-m5 as well
-jo
On Wed, Jan 9, 2013 at 11:04 AM, José Carlos R. Casimiro
<j...@portugalmail.com> wrote:
> Hello again,
>
> I've been using this, with good results.
>
> I updated my git version and realize that there was no presents any more for
> the E-PL1.
> Some changes have been made. Now there's noiseprofiles.h.
>
> The presets are only present now, if the picture was taken with that camera,
> right?
> When I first did the profiling, I entered the name of the camera and iso's
> by hand,
>
> so I changed this:
>
> // olympus e-pl1 contributed by José Carlos R. Casimiro
> {N_("olympus e-pl1 iso 100"), "Olympus", "E-PL1", 100,
> {6.1332646664107e-06, 6.1332646664107e-06, 6.1332646664107e-06},
> {-1.70427018703982e-07, -1.70427018703982e-07, -1.70427018703982e-07}},
> {N_("olympus e-pl1 iso 200"), "Olympus", "E-PL1", 200,
> {6.17771627349177e-06, 6.17771627349177e-06, 6.17771627349177e-06},
> {-1.94243887646926e-07, -1.94243887646926e-07, -1.94243887646926e-07}},
> {N_("olympus e-pl1 iso 400"), "Olympus", "E-PL1", 400,
> {1.00980942726634e-05, 1.00980942726634e-05, 1.00980942726634e-05},
> {-8.10099319236512e-08, -8.10099319236512e-08, -8.10099319236512e-08}},
> {N_("olympus e-pl1 iso 800"), "Olympus", "E-PL1", 800,
> {1.78191571180193e-05, 1.78191571180193e-05, 1.78191571180193e-05},
> {3.41992783976417e-07, 3.41992783976417e-07, 3.41992783976417e-07}},
> {N_("olympus e-pl1 iso 1600"), "Olympus", "E-PL1", 1600,
> {1.78191571180193e-05, 1.78191571180193e-05, 1.78191571180193e-05},
> {3.41992783976417e-07, 3.41992783976417e-07, 3.41992783976417e-07}},
> {N_("olympus e-pl1 iso 3200"), "Olympus", "E-PL1", 3200,
> {6.38579880360713e-05, 6.38579880360713e-05, 6.38579880360713e-05},
> {6.71632186716273e-06, 6.71632186716273e-06, 6.71632186716273e-06}},
>
> to this:
>
> // olympus e-pl1 contributed by José Carlos R. Casimiro
> {"E-PL1 - 100 ISO", "OLYMPUS IMAGING CORP.", "E-PL1", 100,
> {6.1332646664107e-06, 6.1332646664107e-06, 6.1332646664107e-06},
> {-1.70427018703982e-07, -1.70427018703982e-07, -1.70427018703982e-07}},
> {"E-PL1 - 200 ISO", "OLYMPUS IMAGING CORP.", "E-PL1", 200,
> {6.17771627349177e-06, 6.17771627349177e-06, 6.17771627349177e-06},
> {-1.94243887646926e-07, -1.94243887646926e-07, -1.94243887646926e-07}},
> {"E-PL1 - 400 ISO", "OLYMPUS IMAGING CORP.", "E-PL1", 400,
> {1.00980942726634e-05, 1.00980942726634e-05, 1.00980942726634e-05},
> {-8.10099319236512e-08, -8.10099319236512e-08, -8.10099319236512e-08}},
> {"E-PL1 - 800 ISO", "OLYMPUS IMAGING CORP.", "E-PL1", 800,
> {1.78191571180193e-05, 1.78191571180193e-05, 1.78191571180193e-05},
> {3.41992783976417e-07, 3.41992783976417e-07, 3.41992783976417e-07}},
> {"E-PL1 - 1600 ISO", "OLYMPUS IMAGING CORP.", "E-PL1", 1600,
> {1.78191571180193e-05, 1.78191571180193e-05, 1.78191571180193e-05},
> {3.41992783976417e-07, 3.41992783976417e-07, 3.41992783976417e-07}},
> {"E-PL1 - 3200 ISO", "OLYMPUS IMAGING CORP.", "E-PL1", 3200,
> {6.38579880360713e-05, 6.38579880360713e-05, 6.38579880360713e-05},
> {6.71632186716273e-06, 6.71632186716273e-06, 6.71632186716273e-06}},
>
> now the presets are there again.
>
> Can this be applied to master?
>
> You told me that was something wrong with the blue channel.
> When I have the time, I will take a new set of shots and do another profile,
> this time with all ISO stops.
>
>
> Please continue the great work,
> Best regards,
>
> José Carlos
>
>
> Sex, 2012-12-14 às 11:50 +1300, johannes hanika escreveu:
>
> hey!
>
> thanks for the presets :)
>
> your blue channel is not bright enough, the fits didn't do the right
> thing. but that's fine, i'm only going to use the green channel, which
> looks great!
>
> i'm now filtering the presets you can choose via exif information. i
> pushed to the denoise branch. could you check it actually works for
> you?
>
> cheers,
> jo
>
> On Thu, Dec 13, 2012 at 11:54 AM, José Carlos R. Casimiro
> <j...@portugalmail.com> wrote:
>> Hello,
>>
>> My camera is a Olympus E-PL1.
>> It has ISO 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250,
>> 1600, 2000, 2500, 3200
>>
>> Is it necessary one shot for each ISO stop, or just 100, 200, 400, 800,
>> 1600, 3200 ?
>>
>> I followed the steps described in the darktable blog for ISO 100, 200,
>> 400,
>> 800, 1600, 3200.
>> I think that the image was over-underexposed enough.
>> Not sure if all the files are needed to you, but I send them attached in a
>> .tar.bz2.
>>
>> Hope that I did it correctly. Hope that it can be of help.
>>
>> Best regards,
>> José Carlos
>
>
> ------------------------------------------------------------------------------
> Master SQL Server Development, Administration, T-SQL, SSAS, SSIS, SSRS
> and more. Get SQL Server skills now (including 2012) with LearnDevNow -
> 200+ hours of step-by-step video tutorials by Microsoft MVPs and experts.
> SALE $99.99 this month only - learn more at:
> http://p.sf.net/sfu/learnmore_122512
> _______________________________________________
> darktable-devel mailing list
> darktable-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/darktable-devel
>
------------------------------------------------------------------------------
Master SQL Server Development, Administration, T-SQL, SSAS, SSIS, SSRS
and more. Get SQL Server skills now (including 2012) with LearnDevNow -
200+ hours of step-by-step video tutorials by Microsoft MVPs and experts.
SALE $99.99 this month only - learn more at:
http://p.sf.net/sfu/learnmore_122512
_______________________________________________
darktable-devel mailing list
darktable-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/darktable-devel
