Hi, First of all a big thank you for making progress with the Fuji sensor. I think you have made very good progress I have been using darktable for my Nikon for quite some time, and been very happy with it and the progress it has made. Since a few months I have a Xpro-1 , and one of the things I have been doing since is looking for a good raw processor. It has been difficult to find a good linux solution. One of the first days I decided to check out how to work with RAW files on the Fuji Since then I have been spending too much time comparing raw processors.
I have attached the a link to a number of files. I have opened them in the raw processors, and then exported with jpeg quality at 100%. No editing done. In LR I admit that I picked the Fuji standard.. I have also included the original RAF file and the off the camera jpeg. I would just like to point your attention to a few parts of the picture. 1. Look at the pole in the left part of the picture. 2. The center of the boat, with all the strong reflections. 3. See how the lens is corrected for in some of the pictures, there is barrel distortion. https://www.dropbox.com/sh/pqxx0rniszlvfy8/-BrPIohIh0 I hope this comparison is somewhat helpful. Cheers Johan ------------------------------------------------------------------------------ Is your legacy SCM system holding you back? Join Perforce May 7 to find out: • 3 signs your SCM is hindering your productivity • Requirements for releasing software faster • Expert tips and advice for migrating your SCM now http://p.sf.net/sfu/perforce _______________________________________________ darktable-devel mailing list darktable-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/darktable-devel
