1)
--- English 1.4.0 manual, Section 2.2.5 --
The image you see is called the group head. If you*press* "G" symbol in the
thumbnail of
a group, only this group gets expanded; if another group was expanded at that
time, it
gets collapsed. To collapse an expanded group again, just click on the "G"
symbol of its
group head.
---
I think replacing 'press' by*'click the*' would make the sentence easier to
understand on first encounter.
2)
Export module.
Currently the size can be specified to be a certain pixel count on width and/or
height
idea: Make it possible to define a (float)number telling a (mega)pixel count,
as an alternative.
e.g. "3 MP" makes
1400x2100 pixels (approximately) for an image with a side ratio of 2:3 *OR*
2100x1400 px for 3:2
or even 1775x1775 for an image with 1:1 ratio (square image)
3)
Where:
Highpass module in DT 1.4.2, as installed from the PPA (I'm on Ubuntu 14.04
LTS).
Replication scheme:
Open any image with a reasonable amount of detail and go to "Darkroom"
Find the Highpass module, click "preset" for the module,
then set Contrast boost to 100%
Pull down "Sharpness" to 0% and then slowly pull it upwards.
I get a coarse jump in the effect at every 6% increase
- I'd expect it to be a lot smoother.
The coarseness can be limited by lessening Contrast boost,
but it still shows even at low settings, e.g. 3% contrast boost.
--
/Hannu
------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems
_______________________________________________
darktable-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/darktable-devel
