P.S. When I run darktable, I do see a lot of messages on the terminal
ending with:
[imageop_init_presets] updating 'denoiseprofile' preset 'NIKON D810 iso
25600' from version 2 to version 3
[imageop_init_presets] updating 'denoiseprofile' preset 'NIKON D810 iso
25600' from blendop version 4 to version 7
[imageop_init_presets] updating 'denoiseprofile' preset 'NIKON D810 iso
51200' from version 2 to version 3
[imageop_init_presets] updating 'denoiseprofile' preset 'NIKON D810 iso
51200' from blendop version 4 to version 7
On 28 September 2014 12:10, Colin Adams <colinpaulad...@gmail.com> wrote:
> I've taken photos and run the scripts.
>
> Firstly, there is a slight problem with the online instructions for
> running the scripts - these only seem to be correct for a git repository.
> If, like me, you only have it installed by rpm, then the instructions need
> amending, I think. I would say:
>
> 1) Create a working directory - e.g. mkdir noise
> 2) cd noise
> 3) cp /usr/share/doc/darktable/noise/* .
> 4) ./gen-profile -d .
>
> Secondly, the final output looks like this:
>
> ===> Prepare final tarball
> /home/colin/D810
> --> Cleanup
>
> == Noise profiling done! ==
>
> Presets were inserted into ./library.db. to test them locally, run:
>
> /home/colin/D810/subr.sh: line 260: printf: a6c4082: invalid number
> darktable --library ./library.db
>
> If you're happy with the results, post the following file to us:
>
> ./dt-noiseprofile-20140928.tar.gz
>
> If not, probably something went wrong. It's a good idea to get in touch
> so we can help you sort it out.
>
> Note the invalid number message - I don't know what the significance is,
> but when I try:
>
> darktable --library ./library.db
>
> and then import the profiled photos from the current directory, I find
> that there is no selection for the Nikon D810 - just the generic possonian.
>
> What should I do now?
>
>
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
darktable-devel mailing list
darktable-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/darktable-devel
