If I upload your NEF file and set the white balance to 'camera' the settings are the following: - tint 1.001 - temperature 4775K - red 2.012 - green 1.000 - blue 1.383 an all these data comes from EXIV data in your file. Is it the same for you? Maurizio
In data sabato 18 febbraio 2017 08:31:53 CET, Michael ha scritto: > it is on but turning it off had no effect on my system. All is good though. > I turned tint to around '1' and that made it good though I wonder why I had > to do that. > > On Sat, Feb 18, 2017 at 8:26 AM, Maurizio <mpagl...@gmail.com> wrote: > > Sorry, my explanation was not good. > > If I load your NEF file to dt it is all OK but white balance module is ON. > > If I switch white balance module OFF the result is exactly the same of > > your > > green image. > > So, please check if your white module is ON and if you have selected the > > appropriate white balance. Maybe try some different choice to see if > > result > > changes as well > > > > In data sabato 18 febbraio 2017 08:22:47 CET, Michael ha scritto: > > > how do you mean? I just open it with dt and the white balance is on. I > > > don't know how to start it with the module inactive. > > > > > > On Sat, Feb 18, 2017 at 8:17 AM, Maurizio Paglia <mpagl...@gmail.com> > > > > wrote: > > > > Ciao Mike, > > > > I downloaded your NEF file, opened in dt and switched OFF the white > > > > balance module. > > > > I obtain the same greenish result! > > > > Check if your white balance module is activated upon loading of the > > > > image. > > > > > > If not switch it on. > > > > Maurizio > > > > > > > > 2017-02-18 14:08 GMT+01:00 Michael <bmi...@gmail.com>: > > > >> I then tried turning it off but that had no effect on any of the > > > > images. > > > > > >> On Sat, Feb 18, 2017 at 8:02 AM, Michael <bmi...@gmail.com> wrote: > > > >>> I didn't activate the module. I just opened and saved. > > > >>> > > > >>> > > > >>> On Sat, Feb 18, 2017 at 7:55 AM, Maurizio Paglia <mpagl...@gmail.com > > > >>> > > > >>> wrote: > > > >>>> Did you checked the white balance? > > > >>>> Maurizio > > > >>>> > > > >>>> Il 18 feb 2017 13:13, "Michael" <bmi...@gmail.com> ha scritto: > > > >>>>> why is it that after editing there is a tint? Sometimes on the > > > > maroon > > > > > >>>>> side and sometimes on the purple side.There must be a setting or > > > >>>>> something. > > > >>>>> > > > >>>>> -- > > > >>>>> > > > >>>>> :-)~MIKE~(-: > > > >>>>> ____________________________________________________________ > > > > __________ > > > > > >>>>> ______ darktable user mailing list to unsubscribe send a mail to > > > >>>>> darktable-user+unsubscr...@lists.darktable.org > > > >>>> > > > >>>> ____________________________________________________________ > > > > ___________ > > > > > >>>> _____ darktable user mailing list to unsubscribe send a mail to > > > >>>> darktable-user+unsubscr...@lists.darktable.org > > > >>> > > > >>> -- > > > >>> > > > >>> :-)~MIKE~(-: > > > >> -- > > > >> > > > >> :-)~MIKE~(-: ____________________________________________________________________________ darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org