Hi, I just upgraded to F26 (fresh install) and using KDE but now having colour issues in that what I see in darktable is not what I'm seeing in colour managed image viewers on the same monitor.
I have 2 monitors: a DELL FP2007 used for most of my daily, non-colour, tasks and a Benq SW2700q used for naturally, image processing. What I'm getting is the following: -------------------------- darktable-cmstest version darktable-2.2.5-2.fc26 this executable was built with colord support enabled darktable itself was built with colord support enabled primary CRTC is at CRTC 0 CRTC for screen 0 CRTC 2 has no mode or no output, skipping CRTC for screen 0 CRTC 3 has no mode or no output, skipping CRTC for screen 0 CRTC 4 has no mode or no output, skipping CRTC for screen 0 CRTC 5 has no mode or no output, skipping DVI-D-1 the X atom and colord returned different profiles X atom: _ICC_PROFILE (766048 bytes) description: DELL 2007 #1 2017-01-26 12-28 2.2 F-S XYZLUT+MTX colord: "/var/lib/colord/icc/SW2700 #2 2017-09-18 23-50 2.2 F-S XYZLUT+MTX.icc" description: SW2700 #2 2017-09-18 23-50 2.2 F-S XYZLUT+MTX HDMI-2 the X atom and colord returned different profiles X atom: _ICC_PROFILE_1 (766048 bytes) description: DELL 2007 #1 2017-01-25 15-47 2.2 F-S XYZLUT+MTX colord: "[home_dir]/.local/share/icc/DELL 2007 #1 2017-01-26 12-28 2.2 F-S XYZLUT+MTX.icc" description: DELL 2007 #1 2017-01-26 12-28 2.2 F-S XYZLUT+MTX Better check your system setup - some monitors reported different profiles You may experience inconsistent color rendition between color managed applications -------------------- What I'm seeing is DVI-D-1 (primary is Benq) has conflicting profiles. I'm thinking the CM image viewers are using xatom. I've configured icc profiles "correctly" in the "Color Corrections" module but I'm confused as to where Xatom is being configured or why it's not picking up the correct profile. As you can see colord has the correct profiles. I don't care about the Dell, it's the Beng profiles that seems to be problem. Also, I don't know what the CRTC messages are implying. Any thoughts or guidance? TIA ____________________________________________________________________________ darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org