As I run darktable it seems to suddenly reboot my system. I almost said
crash but I guess it is a mini crash. Last time this happened I ran it
about 15 minutes. I edited one image and moved on to the next when suddenly
it goes 'poof'. As it warms up it happens more frequently so I was thinking
it was my video card. 'sensors' said (after the reboot):
bmike1@MikesBeast ~ $ modprobe k10temp
bmike1@MikesBeast ~ $ sensors
radeon-pci-0100
Adapter: PCI adapter
temp1: +66.0°C
it8718-isa-0228
Adapter: ISA adapter
in0: +1.46 V (min = +0.00 V, max = +4.08 V)
in1: +1.94 V (min = +0.00 V, max = +4.08 V)
in2: +3.25 V (min = +0.00 V, max = +4.08 V)
+5V: +2.99 V (min = +0.00 V, max = +4.08 V)
in4: +3.10 V (min = +0.00 V, max = +4.08 V)
in5: +3.25 V (min = +0.00 V, max = +4.08 V)
in6: +4.08 V (min = +0.00 V, max = +4.08 V)
in7: +2.35 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.15 V
fan1: 3139 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
temp1: +35.0°C (low = +127.0°C, high = +127.0°C) sensor =
thermistor
temp2: +51.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal
diode
temp3: +52.0°C (low = +127.0°C, high = +127.0°C) sensor =
thermistor
cpu0_vid: +1.050 V
intrusion0: ALARM
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +48.8°C (high = +70.0°C)
(crit = +72.0°C, hyst = +70.0°C)
Is darktable known to crash... reboot a system? As I was saying I was
thinking it was my video card. Is there something I need to do to access
the video card?
:-)~MIKE~(-:
____________________________________________________________________________
darktable user mailing list
to unsubscribe send a mail to [email protected]
