On Sun, 11 Feb 2018 22:49:22 +0100, David Vincent-Jones wrote: > I am running OpenSUSE Tumbleweed and have avoided trying to install > OpenCL based on some past poor and frustrating experience. I do have an > i7 processor and darktable runs (in my opinion) fairly well as it is. I > would however like some guidance from anybody who is running the same > distribution. > > The Tumbleweed distribution gets updated so very often that I am > reluctant to have to play with the co-processor setup every day or two.
I'm using openSUSE Leap 42.3. I'm aware it's not the same as Tumbleweed, but I think most of the key bits are the same. nVidia (I'm assuming that that's the GPU you have) support in openSUSE is weak, but after a lot of poking around I figured out how to put all the pieces together. I'll send you my (draft) HOWTO under separate cover. -- Robert Krawitz <r...@alum.mit.edu> *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton ____________________________________________________________________________ darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
