Replying back to the list (instead of personal email)
I did the tagging only once in the past but I was able to tag about
9000+ images.
My notes are not that clear...
Looks like
1. I changed the time of all images to UTC (but this is the actual time
- not the zone)
2. When changing the offset - I select several images and then try to
modify the first (change the time by directly typing the desired time
stamp) - this applies offset on all images - it does not change all
images to be the exact same time.
3. What is unclear is - when I am importing the track and the images are
already in UTC - is the zone your local zone or the UTC zone - I have
the feeling that I changed the "time" to UTC but and I changed the zone
to PST (my zone) - you will have to experiment with this.
4. Once the images have the coordinates from the track I changed back
the time to the original one and they preserved the coordinates properly.
Hope it works for you. It would be nice to have a newer video but
honestly I never had time to do that.
Have you tried pixls.us?
https://discuss.pixls.us/t/geotagging-in-darktable/6022
and the complete archive
https://www.mail-archive.com/search?q=geotagging&l=darktable-user%40lists.darktable.org
Regards,
B
On 3/13/22 06:33, jot ess wrote:
I'm fiddling and trying. Yes, I can actually type into the text box.
The problem seems to be the image selection.With one image I managed
to enter a changed value in the top line and calculate the offset to
the original date/time displayed in the second line.Next try didn't
work - I just don't know what to do to keep an image selected after
clicking it so I can apply anything to it.
But I realize that I have this problem only in the map desktop, not in
the lighttable desktop. One thing that doesn't work in either desktop
is the setting of the time zone. I can select one, but upon hitting
enter it's UTC again.
The guy in the video (which is quite well done!) has a version of dt
tha has a somewhat different UI. E. g. he can select a time zone when
selecting the track file.
Am Mi., 9. März 2022 um 01:27 Uhr schrieb I. Ivanov <[email protected]>:
Can you type at all where the highlighted number 14 is?
If grayed out - no change was done so nothing to apply
when I change by 15 min - apply offset becomes available.
I am on PopOS 20.04 and using DT 3.8.1 from the OBS repository.
I used this video https://youtu.be/Ab6qohOQURs as a guidance. Did
have
to go back and forth few times but eventually it worked well (but
it was
a few months ago).
Regards,
B
On 3/8/22 14:27, jot ess wrote:
>
>
>
>
>
> Hello,
> I feel stupid asking this question because I feel like I had never
> used a computer's GUI, but after a lot of trying I still can't see
> what I'm doing wrong:
>
> I want to use the geotagging module in dt 3.8.1 (which I used
> successfully in previous versions, though some months ago) to
> associate images with a gps track, i.e. to attach geotags to
them. I
> have correctly loaded a track and I see the film strip, the
geotagging
> module is displayed.
> After a lot of fiddling the button "apply geo-location" was not
greyed
> out any more and I could click it. Now the images are displayed
on the
> map and I see that I should have corrected for the time zone. But I
> can't interact successfully with any part of the geotagging module
> above the gpx file entry box.
> "date/time" contains the date/time values of the image under the
mouse
> or the most recently clicked image and while the mouse is still
over
> the image, the "original date/time" is also displayed in a
greyed-out
> style.
> (I wrote "most recently selected" because there seems not to be a
> "selected" state of images. When I click one in the film strip it's
> highlighted, but as I move the mouse elsewhere it's not any more.)
> I can enter values but they don't take effect. Do I have to do
> anything to have them applied? No matter what I enter, "date/time
> offset" always displays zeroes. Maybe because the "original
date/time"
> fields are empty because my mouse is currently not over any image.
> image.png
> In the "camera time zone" I can select anything from the
dropdown menu
> but as a result, the entry in the box still reads "UTC".
>
> In the manual it says "Press the /lock/ button to lock the
calculated
> offset in the module." If I managed to calculate an offset - where
> would the lock button be?
>
> Is there any sort of "main switch" to make the module functional?
>
> Btw, the map source Openstreetmap doesn't work, it's blank. All the
> others work.
>
> Best regards
> Joachim
>
>
____________________________________________________________________________
> darktable user mailing list to unsubscribe send a mail to
> [email protected]
<mailto:darktable-user%[email protected]>
____________________________________________________________________________
darktable user mailing list
to unsubscribe send a mail to
[email protected]
<mailto:darktable-user%[email protected]>
____________________________________________________________________________
darktable user mailing list
to unsubscribe send a mail to [email protected]
