You can easily define this preset by yourself. Set the three channel multipliers for red, green and blue to 1.0 and save it as a new preset with the name "passthrough".
Ulrich Am 20.09.2014 15:30, schrieb Francisco Cribari: > Tobias: When I open a photo in darkroom white balance is not listed in > the history stack. If I change the WB settings or if I turn off the > white balance module, then it is shown in the history stack. If I change > the WB settings but keep the WB module active, I can go to lighttable > and copy the WB balance settings from that photo to other photos using > CTRL+SHIFT+C. No problem. However, if I simply turn off the WB balance > module and go back to lighttable, click on the image and do > SHIFT+CTRL+C, I do *not* see > > white balance (off) > > as one of the options. I would like to see that option so that I could > copy it to a set of other photos. This is useful, e.g., for double > exposure .NEF (RAW) files. I used to select the passthrough option in > the WB module and then use CTRL+SHIFT+C to copy that to all other double > exposure photos. The passthrough WB option was removed from Darktable. I > should then be able to turn off the WB balance module and copy "white > balance (off)" from one photo to a set of other photos. Would it be > possible to make "white balance (off)" show up as one of the options > that can be selected after a CTRL+SHIFT+C (or to put back the > passthrough option in the WB module)? Thank you. Francisco > > ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ Darktable-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/darktable-users
