Hi.

I pushed a trick to the master
<https://github.com/darktable-org/darktable/pull/716> that will "fix"
issues like "ptrace: Operation not permitted.".
Once Pascal pushed new PPA, backtraces will be useful.

Until then you could start DT from gdb, make it crash and post useful bt.
Also, what causes DT to crash? Specific image?

On Sun, Oct 26, 2014 at 3:23 PM, Francisco Cribari <[email protected]>
wrote:

> Hi Roman: I did the cleaning you suggested. After that I started Darktable
> as
>
> darktable -d
>
> DT crashed again.
>
> cribari@darwin3:~/personal/photo/software/darktable$ darktable -d
> [defaults] found a 64-bit system with 7730816 kb ram and 4 cores (0 atom
> based)
> [mipmap_cache] cache is empty, file
> `/home/cribari/.cache/darktable/mipmaps-5adeeaa995f8ecf7e64bb1fe188c8f3ec6160f28'
> doesn't exist
> [exiv2] Directory SubImage2, entry 0x0111: Strip 0 is outside of the data
> area; ignored.
>
> Could not attach to process.  If your uid matches the uid of the target
> process, check the setting of /proc/sys/kernel/yama/ptrace_scope, or try
> again as the root user.  For more details, see /etc/sysctl.d/10-ptrace.conf
> ptrace: Operation not permitted.
> /home/cribari/personal/photo/software/darktable/15409: No such file or
> directory.
> backtrace written to /tmp/darktable_bt_636XNX.txt
> Segmentation fault (core dumped)
> cribari@darwin3:~/personal/photo/software/darktable$
>
> The backtrace file it generated contains the following:
>
> cribari@darwin3:~/personal/photo/software/darktable$ sudo cat
> /tmp/darktable_bt_636XNX.txt
> this is darktable 1.5+2135~g3be1611 reporting a segfault:
>
> /usr/share/darktable/gdb_commands:2: Error in sourced command file:
> No stack.
> cribari@darwin3:~/personal/photo/software/darktable$
>
> Darktable also crashes when I start it the normal way (via Unity).
>
> Is there anything else I should try? Suggestions are welcome. Thank you. FC
>
>
> On Sun, Oct 26, 2014 at 8:48 AM, Roman Lebedev <[email protected]>
> wrote:
>
>> Hi.
>>
>> Tip 1: *do NOT run DT as root!*
>> Tip 2: try cleaning(removing) ~/.cache/darktable and ~/.config/darktable
>>
>> On Sun, Oct 26, 2014 at 2:39 PM, Francisco Cribari <[email protected]>
>> wrote:
>>
>>> I run the unstable version of Darktable (from Pascal's PPA - version
>>> 1.5+2075~g09042e3) on an Ubuntu 14.04 (64 bit). Darktable is crashing. I
>>> started Darktable as
>>>
>>> cribari@darwin3:~/.cache/darktable$ sudo darktable -d
>>>
>>> and the output was
>>>
>>> cribari@darwin3:~$ sudo darktable -d
>>> WARNING: either your user id or the effective user id are 0. are you
>>> running darktable as root?
>>> [imageop_init_presets] WARNING: Could not find versioning information
>>> for 'basecurve' preset 'measured basecurve'
>>> Until some is found, the preset will be unavailable.
>>> (To make it return, please load an image that uses the preset.)
>>> [imageop_init_presets] WARNING: Could not find versioning information
>>> for 'basecurve' preset 'measured basecurve'
>>> Until some is found, the preset will be unavailable.
>>> (To make it return, please load an image that uses the preset.)
>>> [imageop_init_presets] WARNING: Could not find versioning information
>>> for 'basecurve' preset 'measured basecurve'
>>> Until some is found, the preset will be unavailable.
>>> (To make it return, please load an image that uses the preset.)
>>> [exiv2] Directory SubImage2, entry 0x0111: Strip 0 is outside of the
>>> data area; ignored.
>>>
>>> [exiv2] Directory SubImage2, entry 0x0111: Strip 0 is outside of the
>>> data area; ignored.
>>>
>>> [New LWP 3266]
>>> [New LWP 3265]
>>> [New LWP 3264]
>>> [New LWP 3255]
>>> [New LWP 3199]
>>> [New LWP 3198]
>>> [New LWP 3197]
>>> [New LWP 3196]
>>> [New LWP 3195]
>>> [New LWP 3194]
>>> [New LWP 3193]
>>> [New LWP 3191]
>>> [New LWP 3189]
>>> [New LWP 3188]
>>> [New LWP 3187]
>>> [New LWP 3186]
>>> [New LWP 3185]
>>> [Thread debugging using libthread_db enabled]
>>> Using host libthread_db library
>>> "/lib/x86_64-linux-gnu/libthread_db.so.1".
>>> 0x00007f50c3d3a505 in ?? () from
>>> /usr/lib/x86_64-linux-gnu/libpixman-1.so.0
>>> backtrace written to /tmp/darktable_bt_34D8NX.txt
>>> cribari@darwin3:~$
>>>
>>> The file darktable_bt_34D8NX.txt is available at
>>>
>>> https://dl.dropboxusercontent.com/u/2171814/darktable_bt_34D8NX.txt
>>>
>>> Tips are welcome. FC
>>>
>>>
>>> --
>>> Francisco Cribari - http://about.me/cribariFrancisco CribaraaahhhFrancisco
>>> Cribari - http://about.me/crihhhrancisco Cribari -
>>> http://about.me/cribariffaaaaFrancisco Cribari -
>>> http://www.cribari.com.br - "All theory, my friend, is grey, but green
>>> is life's glad golden tree." --Goethe (Faust)
>>>
>>>
>>> ------------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Darktable-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/darktable-users
>>>
>>>
>>
>
>
> --
> Francisco Cribari - http://about.me/cribariFrancisco CribaraaahhhFrancisco
> Cribari - http://about.me/crihhhrancisco Cribari -
> http://about.me/cribariffaaaaFrancisco Cribari - http://www.cribari.com.br
> - "All theory, my friend, is grey, but green is life's glad golden tree."
> --Goethe (Faust)
>
------------------------------------------------------------------------------
_______________________________________________
Darktable-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/darktable-users

Reply via email to