Am Dienstag, 9. Juni 2015, 12:11:06 schrieb Mark Patey: > Hi, > > I've preordered a Fuji X-T10. I'm hoping it will ship to me in a couple of > weeks. Obviously, no support exists for it in DT, and I wouldn't expect it > to show up on the supported list for a while. > > But it uses the same sensor and processor as the Fuji X-T1, X-E2, X-100T > and a few others. Its raw output is supposed to be identical to those > cameras. > > How do I tell dt to automatically treat it like an X-T1, for example? > > Thanks in advance for any light you can shed!
First of all the official answer: The best way will be to provide one sample photo to us and rawsamples.ch. See [0]. Now the unofficial one: If you are really sure that it's basically the same camera inside (not just the same sensor, but also the same CFA pattern, same file format details, same white level & black point, ...) then you could probably copy&paste the entry for one of those other cameras in share/darktable/rawspeed/cameras.xml. Be aware that chances are good that once we do add the camera to darktable all your previously edited photos will look different. You have been warned. > -Mark Tobias [0] http://www.darktable.org/resources/camera-support/
signature.asc
Description: This is a digitally signed message part.
------------------------------------------------------------------------------
_______________________________________________ Darktable-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/darktable-users
