On Friday 30 November 2007 15:03, Don Friedman wrote:
> Wiebe - I've had experiences like you're describing and doing "the big
> clean" generally helps. I swear that a piece of lint gets into the data
> somewhere and screws things up. It has been some time since this has
> happened to me but I remember that when I exported the data and scanned it
> there were some ascii codes in there that shouldn't have been there are
> removing them cleared things up.
>
> Don
>
I've just done the Big Clean, but it didn't help, unfortunately. It fails at
the same point. However, I don't think it's because of a specific card,
because when I remove the card, it fails at a different ponit.
I also tried not running DP with /w (to output in the latin1 character set),
which I normally use. It didn't make a difference.
BTW, is there any risk in doing a Big Clean? I noticed that some things are
different: the first report ("Built-In Short Reports") used to have a dutch
name, now it's English. Not that that's a problem, it's just different. Also,
when outputting a report to a file, the output also used to be written to the
screen, but that doesn't happen anymore.
_______________________________________________
Dataperf mailing list
[email protected]
http://lists.dataperfect.nl/mailman/listinfo/dataperf
