Hi Chris,
Yes you need both recursive links. In my cheat sheet I have this: Numbering using a Recursive Link Absolute Incrementing numbers on a network without using an ::I field Step 1 Create field P1F1 Step 2 Create field P1F2 Step 3 Create IndexN on P1F2 (ie reverse index of incrementing number) Step 4 Create P1F2 Formula = minus P1F1 (on ANY CHANGE) Step 5 Create Recursive Panel link P1F3 using Index 1 with no field list Step 6 Create 2nd Recursive Panel link P1F4 also using Index1 with no field list Step 7 Create Formula in P1F1 when Record is SAVED (IF P1F2=0 THEN P1F3P1F1 /* ie thru first recursive link */ ELSE P1F4P1F1 /* ie thru second recursive link */ ENDIF) + 1 Note: P1F1 must precede P1F2 in edit order Credit for this method to Ralph Alvy Unless I am doing this over and over again I always forget so I often refer back to my cheatsheet. Of course you need to adjust for panel field and index numbers. You can add it to an existing panel as long as you get at the ducks lined up in a row, so there is nothing magic about starting it on a greenfields panel. Regards Brian _____ From: [email protected] [mailto:[email protected]] On Behalf Of Chris Pedersen Sent: Tuesday, 28 September 2010 10:53 AM To: [email protected] Subject: [Dataperf] Recursive Panel Links on a network Thanks for letting me pick y'alls brains again. Was absolute recursive incrementation fixed so that only one link was require in a network setting, or is two links still required? Thanks, Chris
_______________________________________________ Dataperf mailing list [email protected] http://lists.dataperfect.nl/mailman/listinfo/dataperf
