Hi Juan, I suspect the Windows 2003 server is functioning as a fileserver so as long as you have a mapped drive, preferably (but not essentially) in a folder with 8.3 naming, then the Windows server of whatever version will not have a problem.
If dp.exe is running in the memory space of the Windows XP 32-bit machine, then you will not have problems, although some would recommend that you run it inside Tame. If you are running DP on the Windows 2003 server 32-bit it should work ok, but you would be well advised to use Tame. You might be running it on the server if you are running it through Terminal Server. You cannot run DP in the memory space of a Windows 64-bit version unless you use an emulator. But if the files are on a 64-bit fileserver and you are running DP.exe in the memory space of a 32-bit machine then everything should be fine. Brian -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Juan A. Salhus R. Sent: Thursday, 4 November 2010 10:10 AM To: [email protected] Subject: [Dataperf] Windows server 2003 Hola Amigos: I need to install in a network windows server 2003, there some considerations to run it? my network have 6 pc with XP pro SP3. best regards Juan A. Salhus _______________________________________________ Dataperf mailing list [email protected] http://lists.dataperfect.nl/mailman/listinfo/dataperf _______________________________________________ Dataperf mailing list [email protected] http://lists.dataperfect.nl/mailman/listinfo/dataperf
