Hi, I'm trying to install version 0.22 of this module.
First small issue ... when I run perl Makefile.PL
% perl Makefile.PL
Testing if you have a C compiler
make: *** No rule to make target `testub'. Stop.
I cannot determine if you have a C compiler
so I will install a perl-only implementation
You can force installation of the XS version with
perl Makefile.PL --xs
Checking if your kit is complete...
Looks good
Warning: prerequisite DateTime::Locale 0.09 not found.
Warning: prerequisite Pod::Man 1.14 not found.
Warning: I could not locate your pod2man program. Please make sure,
your pod2man program is in your PATH before you execute 'make'
Writing Makefile for DateTime
So why can't it find gcc & pod2man?
% which gcc
/usr/bin/gcc
% which pod2man
/usr/bin/pod2man
(I just installed the latest version of pod2man)
Now here is where it gets ugly.
% make
Makefile:98: *** missing separator. Stop.
So I look at the makefile, and find alot of what look to be incomplete
lines, unmatched quotes, etc. Makefile is listed below.
Any ideas what the problem is? I've tried this on a RedHat 9 box and a
RedHat Enterprise Edition box, both manually, and with CPAN. Same results
every time.
Thanks
Eric
FWIW
% perl -v
This is perl, v5.8.0 built for i386-linux-thread-multi
(with 1 registered patch, see perl -V for more detail)
% uname -ra
Linux ****** 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux
# This Makefile is for the DateTime extension to perl.
#
# It was generated automatically by MakeMaker version
# 6.03 (Revision: 1.63) from the contents of
# Makefile.PL. Don't edit this file, edit Makefile.PL instead.
#
# ANY CHANGES MADE HERE WILL BE LOST!
#
# MakeMaker ARGV: ()
#
# MakeMaker Parameters:
# ABSTRACT => q[DateTime base objects]
# AUTHOR => q[Dave Rolsky <[EMAIL PROTECTED]>]
# CONFIGURE => CODE(...)
# NAME => q[DateTime]
# PREREQ_PM => { Test::More=>q[0], DateTime::TimeZone=>q[0.26],
DateTime::Locale=>q[0.09], Class::Factory::Util=>q[1.3],
Params::Validate=>q[0.72], Pod::Man=>q[1.14], Time::Local=>q[1.04] }
# VERSION_FROM => q[lib/DateTime.pm]
# clean => { FILES=>q[] }
# MakeMaker 'CONFIGURE' Parameters:
# ABSTRACT => q[DateTime base objects]
# AUTHOR => q[Dave Rolsky <[EMAIL PROTECTED]>]
# C => []
# CONFIGURE => CODE(...)
# NAME => q[DateTime]
# PREREQ_PM => { Test::More=>q[0], DateTime::TimeZone=>q[0.26],
DateTime::Locale=>q[0.09], Class::Factory::Util=>q[1.3],
Params::Validate=>q[0.72], Pod::Man=>q[1.14], Time::Local=>q[1.04] }
# VERSION_FROM => q[lib/DateTime.pm]
# XS => { }
# clean => { FILES=>q[] }
# --- MakeMaker post_initialize section:
# --- MakeMaker const_config section:
# These definitions are from config.sh (via
/usr/lib/perl5/5.8.0/i386-linux-thread-multi/Config.pm)
# They may have been overridden via Makefile.PL or on the command line
AR = ar
CC = gcc
CCCDLFLAGS = -fPIC
CCDLFLAGS = -rdynamic
-Wl,-rpath,/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE
DLEXT = so
DLSRC = dl_dlopen.xs
LD = gcc
LDDLFLAGS = -shared -L/usr/local/lib
LDFLAGS = -L/usr/local/lib
LIBC = /lib/libc-2.3.2.so
LIB_EXT = .a'
libc='
OBJ_EXT = ub
OSNAME = linux
OSVERS = 2.4.21-1.1931.2.382.entsmp
RANLIB = _
SO = so
EXE_EXT =
FULL_AR = /usr/bin/ar
# --- MakeMaker constants section:
AR_STATIC_ARGS = cr
NAME = DateTime
DISTNAME = DateTime
NAME_SYM = DateTime
VERSION = 0.22
VERSION_SYM = 0_22
XS_VERSION = 0.22
INST_ARCHLIB = blib/arch
INST_SCRIPT = blib/script
INST_BIN = blib/bin
INST_LIB = blib/lib
INSTALLDIRS = site
PREFIX = /usr
SITEPREFIX = /usr
VENDORPREFIX = buti
INSTALLPRIVLIB = /usr/lib/perl5/5.8.0
INSTALLSITELIB = /usr/lib/perl5/site_perl/5.8.0'
installsiteman1='/usr/share/man/man1'
installsiteman3='/usr/share/man/man3'
installsitescript='/usr/bin'
installstyle='lib/perl5'
installusrbinperl='define'
installvendorarch='/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi'
installvendorbin='/usr/bin'
installvendorhtml1=''
installvendorhtml3=''
installvendorlib='/usr/lib/perl5/vendor_perl/5.8.
INSTALLVENDORLIB = ib/perl5'
installusrbinperl='def
INSTALLARCHLIB = /usr/lib/perl5/5.8.0/i386-linux-thread-multi
INSTALLSITEARCH = /usr/lib/pe
INSTALLVENDORARCH = /usr/lib/perl5/vendor_perl/5.8.0/i38
INSTALLBIN = /usr/bin'
installhtml1dir=''
installhtml3dir=''
installman1
INSTALLSITEBIN = /usr
INSTALLVENDORBIN = /usr/bin'
installvendorhtml1=''
installvendorhtml3=''
installvendorlib='/u
INSTALLSCRIPT = /usr/bin
PERL_LIB = /usr/lib/perl5/5.8.0
PERL_ARCHLIB = /usr/lib/perl5/5.8.0/i386-linux-thread-multi
SITELIBEXP = '/usr/lib/perl5/site_perl'
sit
SITEARCHEXP = /usr/lib/pe
LIBPERL_A = libperl.a'
libc='
FIRST_MAKEFILE = Makefile
MAKE_APERL_FILE = Makefile.aperl
PERLMAINCC = $(CC)
PERL_INC = /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE
PERL = /usr/bin/perl
FULLPERL = /usr/bin/perl
PERLRUN = $(PERL)
FULLPERLRUN = $(FULLPERL)
PERLRUNINST = $(PERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
FULLPERLRUNINST = $(FULLPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
ABSPERL = $(PERL)
ABSPERLRUN = $(ABSPERL)
ABSPERLRUNINST = $(ABSPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
FULL_AR = /usr/bin/ar
PERL_CORE = 0
NOOP = $(SHELL) -c true
NOECHO = @
VERSION_MACRO = VERSION
DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\"
XS_VERSION_MACRO = XS_VERSION
XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\"
PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc
-Dfree=Perl_mfree -Drealloc=Perl_realloc -Dcalloc=Perl_calloc
MAKEMAKER = /usr/lib/perl5/5.8.0/ExtUtils/MakeMaker.pm
MM_VERSION = 6.03
# FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle).
# BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle)
# PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar)
# DLBASE = Basename part of dynamic library. May be just equal BASEEXT.
FULLEXT = DateTime
BASEEXT = DateTime
PARENT_NAME =
DLBASE = $(BASEEXT)
VERSION_FROM = lib/DateTime.pm
OBJECT =
LDFROM = $(OBJECT)
LINKTYPE = dynamic
# Handy lists of source code files:
XS_FILES=
C_FILES =
O_FILES =
H_FILES = leap_seconds.h \
ppport.h
MAN1PODS =
MAN3PODS = lib/DateTime.pm \
lib/DateTime/Duration.pm \
lib/DateTime/Infinite.pm \
lib/DateTime/LeapSecond.pm
INST_MAN1DIR = blib/man1
MAN1EXT =
INSTALLMAN1DIR = /usr/share/man/man1
INSTALLSITEMAN1DIR = /usr/share/man/man1
INSTALLVENDORMAN1DIR = buti/share/man/man1
INST_MAN3DIR = blib/man3
MAN3EXT = 3pm
INSTALLMAN3DIR = /usr/share/man/man3
INSTALLSITEMAN3DIR = /usr/share/man/man3
INSTALLVENDORMAN3DIR = buti/share/man/man3
PERM_RW = 644
PERM_RWX = 755
# work around a famous dec-osf make(1) feature(?):
makemakerdflt: all
SUFFIXES: .xs .c .C .cpp .i .s .cxx .cc $(OBJ_EXT)
# Nick wanted to get rid of .PRECIOUS. I don't remember why. I seem to
recall, that
# some make implementations will delete the Makefile when we rebuild it.
Because
# we call false(1) when we rebuild it. So make(1) is not completely wrong
when it
# does so. Our milage may vary.
# .PRECIOUS: Makefile # seems to be not necessary anymore
PHONY: all config static dynamic test linkext manifest
# Where is the Config information that we are using/depend on
CONFIGDEP = $(PERL_ARCHLIB)/Config.pm $(PERL_INC)/config.h
# Where to put things:
INST_LIBDIR = $(INST_LIB)
INST_ARCHLIBDIR = $(INST_ARCHLIB)
INST_AUTODIR = $(INST_LIB)/auto/$(FULLEXT)
INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT)
INST_STATIC =
INST_DYNAMIC =
INST_BOOT =
EXPORT_LIST =
PERL_ARCHIVE =
PERL_ARCHIVE_AFTER =
TO_INST_PM = lib/DateTime.pm \
lib/DateTime/Duration.pm \
lib/DateTime/Infinite.pm \
lib/DateTime/LeapSecond.pm \
lib/DateTimePP.pm \
lib/DateTimePPExtra.pm
PM_TO_BLIB = lib/DateTime.pm \
blib/lib/DateTime.pm \
lib/DateTime/Duration.pm \
blib/lib/DateTime/Duration.pm \
lib/DateTimePP.pm \
blib/lib/DateTimePP.pm \
lib/DateTimePPExtra.pm \
blib/lib/DateTimePPExtra.pm \
lib/DateTime/Infinite.pm \
blib/lib/DateTime/Infinite.pm \
lib/DateTime/LeapSecond.pm \
blib/lib/DateTime/LeapSecond.pm
# --- MakeMaker tool_autosplit section:
# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto
AUTOSPLITFILE = $(PERLRUN) -e 'use AutoSplit; autosplit($$ARGV[0],
$$ARGV[1], 0, 1, 1) ;'
# --- MakeMaker tool_xsubpp section:
# --- MakeMaker tools_other section:
SHELL = /bin/sh'
shar='
CHMOD = chmod
CP = cp
LD = gcc
MV = mv
NOOP = $(SHELL) -c true
RM_F = rm -f
RM_RF = rm -rf
TEST_F = test -f
TOUCH = touch
UMASK_NULL = umask 0
DEV_NULL = > /dev/null 2>&1
# The following is a portable way to say mkdir -p
# To see which directories are created, change the if 0 to if 1
MKPATH = $(PERLRUN) "-MExtUtils::Command" -e mkpath
# This helps us to minimize the effect of the .exists files A yet
# better solution would be to have a stable file in the perl
# distribution with a timestamp of zero. But this solution doesn't
# need any changes to the core distribution and works with older perls
EQUALIZE_TIMESTAMP = $(PERLRUN) "-MExtUtils::Command" -e eqtime
# Here we warn users that an old packlist file was found somewhere,
# and that they should call some uninstall routine
WARN_IF_OLD_PACKLIST = $(PERL) -we 'exit unless -f $$ARGV[0];' \
-e 'print "WARNING: I have found an old package in\n";' \
-e 'print "\t$$ARGV[0].\n";' \
-e 'print "Please make sure the two installations are not conflicting\n";'
UNINST=0
VERBINST=0
MOD_INSTALL = $(PERL) "-I$(INST_LIB)" "-I$(PERL_LIB)" "-MExtUtils::Install" \
-e "install([EMAIL PROTECTED],'$(VERBINST)',0,'$(UNINST)');"
DOC_INSTALL = $(PERL) -e '$$\="\n\n";' \
-e 'print "=head2 ", scalar(localtime), ": C<", shift, ">", " L<",
$$arg=shift, "|", $$arg, ">";' \
-e 'print "=over 4";' \
-e 'while (defined($$key = shift) and defined($$val = shift)){print "=item
*";print "C<$$key: $$val>";}' \
-e 'print "=back";'
UNINSTALL = $(PERLRUN) "-MExtUtils::Install" \
-e 'uninstall($$ARGV[0],1,1); print "\nUninstall is deprecated. Please
check the";' \
-e 'print " packlist above carefully.\n There may be errors. Remove the";' \
-e 'print " appropriate files manually.\n Sorry for the inconveniences.\n"'
# --- MakeMaker dist section:
ZIPFLAGS = -r
TO_UNIX = @$(NOOP)
TAR = tar
POSTOP = @$(NOOP)
ZIP = zip
DIST_DEFAULT = tardist
CI = ci -u
SHAR = shar
COMPRESS = gzip --best
DIST_CP = best
PREOP = @$(NOOP)
TARFLAGS = cvf
DISTVNAME = $(DISTNAME)-$(VERSION)
SUFFIX = .gz
RCS_LABEL = rcs -Nv$(VERSION_SYM): -q
# --- MakeMaker macro section:
# --- MakeMaker depend section:
# --- MakeMaker cflags section:
# --- MakeMaker const_loadlibs section:
# --- MakeMaker const_cccmd section:
# --- MakeMaker post_constants section:
# --- MakeMaker pasthru section:
PASTHRU = LIB="$(LIB)"\
LIBPERL_A="$(LIBPERL_A)"\
LINKTYPE="$(LINKTYPE)"\
PREFIX="$(PREFIX)"\
OPTIMIZE="$(OPTIMIZE)"\
PASTHRU_DEFINE="$(PASTHRU_DEFINE)"\
PASTHRU_INC="$(PASTHRU_INC)"
# --- MakeMaker c_o section:
# --- MakeMaker xs_c section:
# --- MakeMaker xs_o section:
# --- MakeMaker top_targets section:
all :: pure_all manifypods
@$(NOOP)
pure_all :: config pm_to_blib subdirs linkext
@$(NOOP)
subdirs :: $(MYEXTLIB)
@$(NOOP)
config :: Makefile $(INST_LIBDIR)/.exists
@$(NOOP)
config :: $(INST_ARCHAUTODIR)/.exists
@$(NOOP)
config :: $(INST_AUTODIR)/.exists
@$(NOOP)
$(INST_AUTODIR)/.exists ::
/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h
@$(MKPATH) $(INST_AUTODIR)
@$(EQUALIZE_TIMESTAMP)
/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h
$(INST_AUTODIR)/.exists
[EMAIL PROTECTED](CHMOD) $(PERM_RWX) $(INST_AUTODIR)
$(INST_LIBDIR)/.exists ::
/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h
@$(MKPATH) $(INST_LIBDIR)
@$(EQUALIZE_TIMESTAMP)
/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h $(INST_LIBDIR)/.exists
[EMAIL PROTECTED](CHMOD) $(PERM_RWX) $(INST_LIBDIR)
$(INST_ARCHAUTODIR)/.exists ::
/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h
@$(MKPATH) $(INST_ARCHAUTODIR)
@$(EQUALIZE_TIMESTAMP)
/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h
$(INST_ARCHAUTODIR)/.exists
[EMAIL PROTECTED](CHMOD) $(PERM_RWX) $(INST_ARCHAUTODIR)
config :: $(INST_MAN3DIR)/.exists
@$(NOOP)
$(INST_MAN3DIR)/.exists ::
/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h
@$(MKPATH) $(INST_MAN3DIR)
@$(EQUALIZE_TIMESTAMP)
/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/perl.h
$(INST_MAN3DIR)/.exists
[EMAIL PROTECTED](CHMOD) $(PERM_RWX) $(INST_MAN3DIR)
help:
perldoc ExtUtils::MakeMaker
# --- MakeMaker linkext section:
linkext :: $(LINKTYPE)
@$(NOOP)
# --- MakeMaker dlsyms section:
# --- MakeMaker dynamic section:
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make dynamic"
#dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT) $(INST_PM)
dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT)
@$(NOOP)
# --- MakeMaker dynamic_bs section:
BOOTSTRAP =
# --- MakeMaker dynamic_lib section:
# --- MakeMaker static section:
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make static"
#static :: Makefile $(INST_STATIC) $(INST_PM)
static :: Makefile $(INST_STATIC)
@$(NOOP)
# --- MakeMaker static_lib section:
# --- MakeMaker manifypods section:
POD2MAN_EXE = -S pod2man
POD2MAN = $(PERL) -we '[EMAIL PROTECTED];for (keys %m){' \
-e 'next if -e $$m{$$_} && -M $$m{$$_} < -M $$_ && -M $$m{$$_} < -M
"Makefile";' \
-e 'print "Manifying $$m{$$_}\n";' \
-e 'system(q[$(PERLRUN) $(POD2MAN_EXE) ].qq[$$_>$$m{$$_}])==0 or warn
"Couldn\047t install $$m{$$_}\n";' \
-e 'chmod(oct($(PERM_RW)), $$m{$$_}) or warn "chmod $(PERM_RW) $$m{$$_}:
$$!\n";}'
manifypods : pure_all lib/DateTime.pm \
lib/DateTime/Duration.pm \
lib/DateTime/Infinite.pm \
lib/DateTime/LeapSecond.pm
@$(POD2MAN) \
lib/DateTime.pm \
$(INST_MAN3DIR)/DateTime.$(MAN3EXT) \
lib/DateTime/Duration.pm \
$(INST_MAN3DIR)/DateTime::Duration.$(MAN3EXT) \
lib/DateTime/Infinite.pm \
$(INST_MAN3DIR)/DateTime::Infinite.$(MAN3EXT) \
lib/DateTime/LeapSecond.pm \
$(INST_MAN3DIR)/DateTime::LeapSecond.$(MAN3EXT)
# --- MakeMaker processPL section:
# --- MakeMaker installbin section:
# --- MakeMaker subdirs section:
# none
# --- MakeMaker clean section:
# Delete temporary files but do not touch installed files. We don't delete
# the Makefile here so a later make realclean still has a makefile to use.
clean ::
-rm -rf ./blib $(MAKE_APERL_FILE) $(INST_ARCHAUTODIR)/extralibs.all
perlmain.c tmon.out mon.out so_locations pm_to_blib *$(OBJ_EXT) *$(LIB_EXT)
perl.exe perl perl$(EXE_EXT) $(BOOTSTRAP) $(BASEEXT).bso $(BASEEXT).def
lib$(BASEEXT).def $(BASEEXT).exp $(BASEEXT).x core core.*perl.*.? *perl.core
-mv Makefile Makefile.old $(DEV_NULL)
# --- MakeMaker realclean section:
# Delete temporary files (via clean) and also delete installed files
realclean purge :: clean
rm -rf $(INST_AUTODIR) $(INST_ARCHAUTODIR)
rm -rf $(DISTVNAME)
rm -f blib/lib/DateTime.pm blib/lib/DateTime/Duration.pm
blib/lib/DateTimePP.pm
rm -f blib/lib/DateTimePPExtra.pm blib/lib/DateTime/Infinite.pm
rm -f blib/lib/DateTime/LeapSecond.pm
rm -rf Makefile Makefile.old
# --- MakeMaker dist_basics section:
distclean :: realclean distcheck
$(NOECHO) $(NOOP)
distcheck :
$(PERLRUN) "-MExtUtils::Manifest=fullcheck" -e fullcheck
skipcheck :
$(PERLRUN) "-MExtUtils::Manifest=skipcheck" -e skipcheck
manifest :
$(PERLRUN) "-MExtUtils::Manifest=mkmanifest" -e mkmanifest
veryclean : realclean
$(RM_F) *~ *.orig */*~ */*.orig
# --- MakeMaker dist_core section:
dist : $(DIST_DEFAULT)
@$(PERL) -le 'print "Warning: Makefile possibly out of date with $$vf" if ' \
-e '-e ($$vf="$(VERSION_FROM)") and -M $$vf < -M "Makefile";'
tardist : $(DISTVNAME).tar$(SUFFIX)
zipdist : $(DISTVNAME).zip
$(DISTVNAME).tar$(SUFFIX) : distdir
$(PREOP)
$(TO_UNIX)
$(TAR) $(TARFLAGS) $(DISTVNAME).tar $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(COMPRESS) $(DISTVNAME).tar
$(POSTOP)
$(DISTVNAME).zip : distdir
$(PREOP)
$(ZIP) $(ZIPFLAGS) $(DISTVNAME).zip $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(POSTOP)
uutardist : $(DISTVNAME).tar$(SUFFIX)
uuencode $(DISTVNAME).tar$(SUFFIX) \
$(DISTVNAME).tar$(SUFFIX) > \
$(DISTVNAME).tar$(SUFFIX)_uu
shdist : distdir
$(PREOP)
$(SHAR) $(DISTVNAME) > $(DISTVNAME).shar
$(RM_RF) $(DISTVNAME)
$(POSTOP)
# --- MakeMaker dist_dir section:
distdir :
$(RM_RF) $(DISTVNAME)
$(PERLRUN) "-MExtUtils::Manifest=manicopy,maniread" \
-e "manicopy(maniread(),'$(DISTVNAME)', '$(DIST_CP)');"
# --- MakeMaker dist_test section:
disttest : distdir
cd $(DISTVNAME) && $(ABSPERLRUN) Makefile.PL
cd $(DISTVNAME) && $(MAKE) $(PASTHRU)
cd $(DISTVNAME) && $(MAKE) test $(PASTHRU)
# --- MakeMaker dist_ci section:
ci :
$(PERLRUN) "-MExtUtils::Manifest=maniread" \
-e "@all = keys %{ maniread() };" \
-e 'print("Executing $(CI) @all\n"); system("$(CI) @all");' \
-e 'print("Executing $(RCS_LABEL) ...\n"); system("$(RCS_LABEL)
@all");'
# --- MakeMaker install section:
install :: all pure_install doc_install
install_perl :: all pure_perl_install doc_perl_install
install_site :: all pure_site_install doc_site_install
install_vendor :: all pure_vendor_install doc_vendor_install
pure_install :: pure_$(INSTALLDIRS)_install
doc_install :: doc_$(INSTALLDIRS)_install
@echo Appending installation info to $(INSTALLARCHLIB)/perllocal.pod
pure__install : pure_site_install
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
doc__install : doc_site_install
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
pure_perl_install ::
@$(MOD_INSTALL) \
read $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist \
write $(INSTALLARCHLIB)/auto/$(FULLEXT)/.packlist \
$(INST_LIB) $(INSTALLPRIVLIB) \
$(INST_ARCHLIB) $(INSTALLARCHLIB) \
$(INST_BIN) $(INSTALLBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_MAN1DIR) $(INSTALLMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLMAN3DIR)
@$(WARN_IF_OLD_PACKLIST) \
$(SITEARCHEXP)/auto/$(FULLEXT)
pure_site_install ::
@$(MOD_INSTALL) \
read $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist \
write $(INSTALLSITEARCH)/auto/$(FULLEXT)/.packlist \
$(INST_LIB) $(INSTALLSITELIB) \
$(INST_ARCHLIB) $(INSTALLSITEARCH) \
$(INST_BIN) $(INSTALLSITEBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_MAN1DIR) $(INSTALLSITEMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLSITEMAN3DIR)
@$(WARN_IF_OLD_PACKLIST) \
$(PERL_ARCHLIB)/auto/$(FULLEXT)
pure_vendor_install ::
@$(MOD_INSTALL) \
$(INST_LIB) $(INSTALLVENDORLIB) \
$(INST_ARCHLIB) $(INSTALLVENDORARCH) \
$(INST_BIN) $(INSTALLVENDORBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_MAN1DIR) $(INSTALLVENDORMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLVENDORMAN3DIR)
doc_perl_install ::
[EMAIL PROTECTED](MKPATH) $(INSTALLARCHLIB)
[EMAIL PROTECTED](DOC_INSTALL) \
"Module" "$(NAME)" \
"installed into" "$(INSTALLPRIVLIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
>> $(INSTALLARCHLIB)/perllocal.pod
doc_site_install ::
[EMAIL PROTECTED](MKPATH) $(INSTALLARCHLIB)
[EMAIL PROTECTED](DOC_INSTALL) \
"Module" "$(NAME)" \
"installed into" "$(INSTALLSITELIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
>> $(INSTALLSITEARCH)/perllocal.pod
doc_vendor_install ::
uninstall :: uninstall_from_$(INSTALLDIRS)dirs
uninstall_from_perldirs ::
@$(UNINSTALL) $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist
uninstall_from_sitedirs ::
@$(UNINSTALL) $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist
# --- MakeMaker force section:
# Phony target to force checking subdirectories.
FORCE:
@$(NOOP)
# --- MakeMaker perldepend section:
# --- MakeMaker makefile section:
# We take a very conservative approach here, but it\'s worth it.
# We move Makefile to Makefile.old here to avoid gnu make looping.
Makefile : Makefile.PL $(CONFIGDEP)
@echo "Makefile out-of-date with respect to $?"
@echo "Cleaning current config before rebuilding Makefile..."
[EMAIL PROTECTED](RM_F) Makefile.old
[EMAIL PROTECTED](MV) Makefile Makefile.old
-$(MAKE) -f Makefile.old clean $(DEV_NULL) || $(NOOP)
$(PERLRUN) Makefile.PL
@echo "==> Your Makefile has been rebuilt. <=="
@echo "==> Please rerun the make command. <=="
false
# --- MakeMaker staticmake section:
# --- MakeMaker makeaperl section ---
MAP_TARGET = perl
FULLPERL = /usr/bin/perl
$(MAP_TARGET) :: static $(MAKE_APERL_FILE)
$(MAKE) -f $(MAKE_APERL_FILE) $@
$(MAKE_APERL_FILE) : $(FIRST_MAKEFILE)
@echo Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET)
@$(PERLRUNINST) \
Makefile.PL DIR= \
MAKEFILE=$(MAKE_APERL_FILE) LINKTYPE=static \
MAKEAPERL=1 NORECURS=1 CCCDLFLAGS=
# --- MakeMaker test section:
TEST_VERBOSE=0
TEST_TYPE=test_$(LINKTYPE)
TEST_FILE = test.pl
TEST_FILES = t/*.t
TESTDB_SW = -d
testdb :: testdb_$(LINKTYPE)
test :: $(TEST_TYPE)
test_dynamic :: pure_all
PERL_DL_NONLAZY=1 $(FULLPERLRUN) "-MExtUtils::Command::MM" "-e"
"test_harness($(TEST_VERBOSE), '$(INST_LIB)', '$(INST_ARCHLIB)')" $(TEST_FILES)
testdb_dynamic :: pure_all
PERL_DL_NONLAZY=1 $(FULLPERLRUN) $(TESTDB_SW) "-I$(INST_LIB)"
"-I$(INST_ARCHLIB)" $(TEST_FILE)
test_ : test_dynamic
test_static :: test_dynamic
testdb_static :: testdb_dynamic
# --- MakeMaker ppd section:
# Creates a PPD (Perl Package Description) for a binary distribution.
ppd:
@$(PERL) -e "print qq{<SOFTPKG NAME=\"$(DISTNAME)\"
VERSION=\"0,22,0,0\">\n\t<TITLE>$(DISTNAME)</TITLE>\n\t<ABSTRACT>DateTime
base objects</ABSTRACT>\n\t<AUTHOR>Dave Rolsky
<[EMAIL PROTECTED]></AUTHOR>\n}" > $(DISTNAME).ppd
@$(PERL) -e "print qq{\t<IMPLEMENTATION>\n\t\t<DEPENDENCY
NAME=\"Class-Factory-Util\" VERSION=\"1,3,0,0\" />\n\t\t<DEPENDENCY
NAME=\"DateTime-Locale\" VERSION=\"0,09,0,0\" />\n\t\t<DEPENDENCY
NAME=\"DateTime-TimeZone\" VERSION=\"0,26,0,0\" />\n\t\t<DEPENDENCY
NAME=\"Params-Validate\" VERSION=\"0,72,0,0\" />\n\t\t<DEPENDENCY
NAME=\"Pod-Man\" VERSION=\"1,14,0,0\" />\n\t\t<DEPENDENCY
NAME=\"Test-More\" VERSION=\"0,0,0,0\" />\n\t\t<DEPENDENCY
NAME=\"Time-Local\" VERSION=\"1,04,0,0\" />\n}" >> $(DISTNAME).ppd
@$(PERL) -e "print qq{\t\t<OS NAME=\"$(OSNAME)\" />\n\t\t<ARCHITECTURE
NAME=\"i386-linux-thread-multi\" />\n\t\t<CODEBASE HREF=\"\"
/>\n\t</IMPLEMENTATION>\n</SOFTPKG>\n}" >> $(DISTNAME).ppd
# --- MakeMaker pm_to_blib section:
pm_to_blib: $(TO_INST_PM)
@$(PERLRUNINST) "-MExtUtils::Install" \
-e "pm_to_blib({qw{lib/DateTime.pm blib/lib/DateTime.pm lib/DateTimePP.pm
blib/lib/DateTimePP.pm lib/DateTime/Duration.pm
blib/lib/DateTime/Duration.pm lib/DateTimePPExtra.pm
blib/lib/DateTimePPExtra.pm}},'$(INST_LIB)/auto','$(PM_FILTER)')"
@$(PERLRUNINST) "-MExtUtils::Install" \
-e "pm_to_blib({qw{lib/DateTime/Infinite.pm blib/lib/DateTime/Infinite.pm
lib/DateTime/LeapSecond.pm
blib/lib/DateTime/LeapSecond.pm}},'$(INST_LIB)/auto','$(PM_FILTER)')"
@$(TOUCH) $@
# --- MakeMaker selfdocument section:
# --- MakeMaker postamble section:
# End.
---------------------------------------------
This message was sent using Endymion MailMan.
http://www.endymion.com/products/mailman/
