On 04-Jun-2001 Gerrit P. Haase wrote:
> Davide Libenzi schrieb am 2001-06-04, 10:41:
>
>>
>> On 04-Jun-2001 Gerrit P. Haase wrote:
>> > Hi Xmailers,
>> >
>> > i found XmailServer, i like it very much.
>> > I build it myself (VC++6.0, OOTB).
>> >
>> > It works as espected on my local box.
>> > It retrieves my mail from my remote pop3-account
>> > and i retrieve it from Xmail (with Pegasus-Client).
>> >
>> > I am able to send my mail with Xmail (as you see if
>> > you read this).
>> >
>> > But i am not able to retrieve or send any mail from
>> > my second box, which is connected over Ethernet (local).
>> >
>> > I tried to connect from the remote box with telnet,
>> > it works perfect.
>> >
>> > But if i try to send with a client, the operation
>> > always times out. (As my client reports).
>> >
>> > I try to pop my mails, nothing happens. No error
>> > message at all.
>>
>> Try to telnet your machine ip to port 25 and 110.
>> Does it work ?
>
> Yes, i tried to connect on both ports.
> Well i tried now to send email, and i got this:
>
> 220 <991681835.317@LORELEY> [XMail 0.71 (Win32/Ix86) ESMTP Server] service
> ready
> ; Mon, 04 Jun 2001 21:10:35 +0200
> NOOP
> 250 OK
> VRFY
> 501 Syntax error in parameters or arguments
> HELO herkules
> 250 haase.dynu.com
> MAIL FROM:<[EMAIL PROTECTED]>
> 551 Server use forbidden
> QUIT
> 221 [XMail 0.71 (Win32/Ix86) ESMTP Server] service closing transmission
> channel
>
>
> How to setup / configure correct? I don't want that everyone from out
> there is able to send mails via my server. So i turned on auth in server.tab.
> I want to try if it works without auth, i saw at the last thread what you
> wrote, i will try out.
>
> But a little bit more problems with pop3:
> I'm able to connect with telnet and retrieve my mail, but not with
> Pegasus, no error, no mails...
To limit relaying use the smtprelay.tab file.
About POP3, are You sure that the IP your mail client is currently speaking to
is the one of the XMail machine ?
If telnet:110 is fine so should be the MUA access.
- Davide