>> I am also having the problem using TFTP to boot the
>> new uImage from my dev server. Once I followed the
>> instruction of using tftp and put the new uImage from
>> Dvevm1.10 to /tftpboot/uImage, and set other booting
>> related envrironment, and then issue the boot command,
I don't have the instructions in front of me, but when I first tried this
following the instructions, I remember it said to set 'bootcmd' to
'dhcp;bootm'.
This didn't work for me, since my DHCP server is different from my TFTP
server ("dhcp" command seemed to get the IP address from the DHCP server,
then tried to TFTP from the DHCP server).
To make it work on my network, I used the 'tftpboot;bootm' commands instead.
Because I'm not using DHCP, I had to set a static IP (using "setenv ipaddr
x.x.x.x", I think), and a static IP for the TFTP server ("setenv serverip
x.x.x.x", I think? - I'm not in front of my DVEVM at the moment so can't
check).
I have no idea if this is the same issue you're seeing - but thought I'd
pass the info along just in case.
- Paul
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Alan Li
Sent: Monday, September 25, 2006 7:08 PM
To: Ring, Chris; slyeh.tw; Jean-Michel Mercier;
[email protected]
Subject: RE: problem of upgrading to DVEVM 1.10
I am also having the problem using TFTP to boot the
new uImage from my dev server. Once I followed the
instruction of using tftp and put the new uImage from
Dvevm1.10 to /tftpboot/uImage, and set other booting
related envrironment, and then issue the boot command,
the evm keeps spitting out
BOOTP broadcast 1
BOOTP broadcast 2
.....
BOOTP broadcast 10
Retry count exceeded: starting again,
it seems it couldn't establish with my dev box's tftp
server, which i checked it is on and no firewall is
blocking.
thanks for any help.
alan
--- "Ring, Chris" <[EMAIL PROTECTED]> wrote:
> What technique is not working for you in DVEVM 1.10?
>
> While we did add some additional tracing techniques
> (look for
> "TraceUtil" in the Codec Engine Application
> Developer's Guide), these
> new utilities are built _on top of_ the original
> techniques. The older
> methods should still continue to work.
>
> Chris
>
> > -----Original Message-----
> > From:
> >
>
[EMAIL PROTECTED]
> p.com [mailto:davinci-linux-open-source->
> [EMAIL PROTECTED] On Behalf
> Of slyeh.tw
> > Sent: Friday, September 22, 2006 7:11 PM
> > To: 'Jean-Michel Mercier';
> > [email protected]
> > Subject: RE: problem of upgrading to DVEVM 1.10
> >
> > Hi,
> >
> > Thanks for the help, I have solved this.
> >
> > BTW, anyone ahre the information of debug trace?
> > Because the trace method in DVEVM1.1 is not the
> same as 1.0xxx.
> > And my code in 1.0xxx can show debug msg. in my
> codec engine
> > which does not work on 1.1.
> >
> > Steve
> >
> > -----Original Message-----
> > From: Jean-Michel Mercier
> [mailto:[EMAIL PROTECTED]
> > Sent: Saturday, September 23, 2006 12:52 AM
> > To: Steve Yeh;
> [email protected]
> > Subject: Re: problem of upgrading to DVEVM 1.10
> >
> >
> > $ find /opt/montavista -name uImage
> >
>
/opt/montavista/pro/devkit/lsp/ti-davinci/arch/arm/boot/uImage
> >
> > Hope this helps.
> >
> > Jean-Michel.
> >
> >
> > ----- Original Message -----
> > From: "Steve Yeh" <[EMAIL PROTECTED]>
> > To: "Anderberg, Niclas" <[EMAIL PROTECTED]>
> > Cc:
> <[email protected]>
> > Sent: Friday, September 22, 2006 4:28 AM
> > Subject: Re: problem of upgrading to DVEVM 1.10
> >
> >
> > > Hi,
> > >
> > > Where can i find uImage in Dvevm1_10?
> > >
> > > Steve
> > >
> > >
> > > 2006/9/21, Steve Yeh <[EMAIL PROTECTED]>:
> > >> Actually, i have updated uImage already.
> > >>
> > >> But i do not know is it success or not.
> > >>
> > >> I check mu u-boot-version is U-Boot 1.1.3 and i
> also follow the
> > >> u-boot-upgrade.html to upgrade uImage.
> > >>
> > >> How can i check this?
> > >>
> > >> Steve
> > >>
> > >>
> > >> 2006/9/21, Anderberg, Niclas
> <[EMAIL PROTECTED]>:
> > >> > Steve,
> > >> >
> > >> > It means that you should upgrade to the new
> Linux kernel
> > image (uImage)
> > >> > shipped with the DVEVM 1.1.
> > >> >
> > >> > Regards,
> > >> > Niclas
> > >> >
> > >> > -----Original Message-----
> > >> > From:
>
[EMAIL PROTECTED]
> > >> >
> >
>
[mailto:[EMAIL PROTECTED]
> On
> > >> > Behalf Of Steve Yeh
> > >> > Sent: Thursday, September 21, 2006 12:57 PM
> > >> > To:
> [email protected]
> > >> > Subject: problem of upgrading to DVEVM 1.10
> > >> >
> > >> > can anyone explain more about this?
> > >> >
> > >> > I have this problem too, what do you mean
> "Use the
> > uImage provided in
> > >> > DVEVM 1.1"
> > >> >
> > >> > Thanks a lot
> > >> >
> > >> > Steve
> > >> >
> _______________________________________________
> > >> > Davinci-linux-open-source mailing list
> > >> >
> [email protected]
> > >> >
> >
>
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> > >> >
> > >>
> > > _______________________________________________
> > > Davinci-linux-open-source mailing list
> > > [email protected]
> > >
> >
>
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> > >
> >
> > _______________________________________________
> > Davinci-linux-open-source mailing list
> > [email protected]
> >
>
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
> >
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
>
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
>
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
