Thanks that got me to this error.
Anyone have any ideas on this "defined instruction"?
U-Boot 1.1.3 (Mar 3 2006 - 01:16:59)
U-Boot code: 81080000 -> 810973A8 BSS: -> 810A02B8
RAM Configuration:
Bank #0: 80000000 256 MB
MY AMD Flash: 16 MB
In: serial
Out: serial
Err: serial
ARM Clock :- 283MZ
DDR Clock :- 189MZ
Hit any key to stop autoboot: 0
BOOTP broadcast 1
DHCP client bound to address 192.168.5.103
TFTP from server 192.168.5.104; our IP address is 192.168.5.103
Filename 'uImage'.
Load address: 0x80700000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
##################
done
Bytes transferred = 1418984 (15a6e8 hex)
## Booting image at 80700000 ...
Image Name: Linux-2.6.19-rc3-omap1-default-g
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1418920 Bytes = 1.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
RAM Configuration:
Bank #0: 80000000 256 MB
MY AMD Flash: 16 MB
In: serial
Out: serial
Err: serial
ARM Clock :- 283MZ
DDR Clock :- 189MZ
Hit any key to stop autoboot: 0
BOOTP broadcast 1
DHCP client bound to address 192.168.5.103
TFTP from server 192.168.5.104; our IP address is 192.168.5.103
Filename 'uImage'.
Load address: 0x80700000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
##################
done
Bytes transferred = 1418984 (15a6e8 hex)
## Booting image at 80700000 ...
Image Name: Linux-2.6.19-rc3-omap1-default-g
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1418920 Bytes = 1.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
Starting kernel ...
ÔØYundefined instruction
pc : [<0200b958>] lr : [<00000003>]
sp : 8104f214 ip : 00000001 fp : 8109aa90
r10: 80700000 r9 : 80700040 r8 : 8104ffdc
r7 : 81097090 r6 : 00000000 r5 : 00000001 r4 : 00008000
r3 : 00000000 r2 : 00000000 r1 : 0000009c r0 : 00000004
Flags: nzcv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
pc : [<0200b958>] lr : [<00000003>]
sp : 8104f214 ip : 00000001 fp : 8109aa90
r10: 80700000 r9 : 80700040 r8 : 8104ffdc
r7 : 81097090 r6 : 00000000 r5 : 00000001 r4 : 00008000
r3 : 00000000 r2 : 00000000 r1 : 0000009c r0 : 00000004
Flags: nzcv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
----- Original Message ----
From: Dirk Behme <[EMAIL PROTECTED]>
To: Will Tucker <[EMAIL PROTECTED]>
Cc: [email protected]
Sent: Saturday, November 4, 2006 11:14:55 PM
Subject: Re: U-Boot NOR bad CRC
From: Dirk Behme <[EMAIL PROTECTED]>
To: Will Tucker <[EMAIL PROTECTED]>
Cc: [email protected]
Sent: Saturday, November 4, 2006 11:14:55 PM
Subject: Re: U-Boot NOR bad CRC
Will Tucker wrote:
> Does anyone know how to fix this?
...
> *** Warning - bad CRC, using default environment
http://linux.omap.com/pipermail/davinci-linux-open-source/2006-August/000614.html
http://www.denx.de/wiki/view/DULG/WarningBadCRCUsingDefaultEnvironment
> Does anyone know how to fix this?
...
> *** Warning - bad CRC, using default environment
http://linux.omap.com/pipermail/davinci-linux-open-source/2006-August/000614.html
http://www.denx.de/wiki/view/DULG/WarningBadCRCUsingDefaultEnvironment
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
