Hi Ah - well, I have heard the same thing about the ATA and the EMIF.
We are currently using CS2, CS3 and the ATA (for hard disk support) simultanteously We have an FPGA mapped onto the BUS. We just lock the kernel, swap some bits, read/write to the fpga, and then restore. As long as interrupts are disabled, the little bit it takes to write to the FPGA isn't hurting us. The HDD + Compact Flash should be able to work the same way. Looks like the drivers need changing though. I'll keep folks posted on our changes. Thanks -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lloyd Sargent Sent: Thursday, November 09, 2006 7:33 PM To: [email protected] Subject: Re: ### Compact Flash and HDD I have been told (and it bears out by looking at the docs) that they are mutually exclusive. You can have one or the other but not both. If there is a way to have both, then I'm curious to hear it. Cheers, Lloyd On Thursday 09 November 2006 13:09, Steve Spano wrote: > Hi > > > > Can someone confirm/deny > > > > Can the HDD and the Compact Flash be used at the same time? > > > > Or more exactly, can the HDD be used 99% of the time and the CF only 1% of > the time for storing image snapshots > > > > Thanks > > > > Steve Spano _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
