Hi to the hardware designers, We are now checking our diagrams for the DaVinci processor.
In the datasheet (SPRS283D) the pin M3 is "RSV24 - reserved - leave unconnected, do not connect to power or ground". In the DVEVM diagrams the pin is driven by a heavy filtered 1.2V supply line. What is the proper connection: leave open or drive with 1.2V? We could of course prepare these components but our board should be as small as possible. Regards, Arie de Muijnck -------------------------------------------------------- CONFIDENTIALITY NOTICE - This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify Arie Muijnck by telephone or [EMAIL PROTECTED] and delete the original transmission and its attachments without reading or saving in any manner. _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
