Hi All,
I am trying to run a LCD application of sixe 1024 x 768. The DCLK requires a
frequency of 65 Mhz for this particular LCD as a result of which i am
supplying the VPBE clock to the VPBECLK pin. However, any image that is
displayed gives me a flickering effect. The same application runs fine when
the same LCD is configured through the internal clock at 54 MHz.
I would like to know if this effect is a limitation of the Chip itlself or
am i missing something anywhere?
Thanx,
Sundar
eInfochips Business Disclaimer:
This message may contain confidential, proprietary or legally Privileged information. In
case you are not the original intended Recipient of the message, you must not, directly
or indirectly, use, Disclose, distribute, print, or copy any part of this message and you
are requested to delete it and inform the sender. Any views expressed in this message are
those of the individual sender unless otherwise stated. Nothing contained in this message
shall be construed as an offer or acceptance of any offer by eInfochips Limited and/or
eInfochips Inc("eInfochips") unless sent with that express intent and with due
authority of eInfochips. eInfochips has taken enough precautions to prevent the spread of
viruses. However the company accepts no liability for any damage caused by any virus
transmitted by this email.
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
