Hi Kim,
I think your settings are correct. But this looks a bit strange?
/setenv nfshost 10:10.1.203/
The error message:
/ Looking up port of RPC 100003/2 on 10.10.1.203 portmap: server
10.10.1.203 not responding, timed out
/evidence that your DVEVM Board has no network connection to your NFS
Server.
Try to access your NFS Share from a "normal" computer, you
can test this easily from a linux shell with the command:
/
mount -t nfs 10.10.1.203:/home/Michael/workdir/filesys /mnt/
If this works, check your network cable. If it fails check your
nfs-server settings and your firewall settings on the server.
And read the getting started guide carefully!
Regards,
Patrik
Kim Klaiman schrieb:
Hello all,
We have just received a DaVinci evaluation board. The board was
booting fine after it has been connected. Now we are trying to change
the boot parameters in order to boot using NFS.
I have changed the boot parameters:
setenv nfshost 10:10.1.203
setenv rootpath /home/Michael/workdir/filesys
setenv bootargs console=ttyS0,115200n8 noinitrd rw ip=dhcp
root=/dev/nfs nfsroot=$(nfshost):$(rootpath),nolock mem=120M
I’m getting the following messages during the boot:
IP-Config: Complete:
device=eth0, addr=10.10.1.117, mask=255.255.255.0, gw=10.10.1.2,
host=10.10.1.117, domain=bioscrypt.corp, nis-domain=(none),
bootserver=0.0.0.0, rootserver=10.10.1.203, rootpath=
Looking up port of RPC 100003/2 on 10.10.1.203 portmap: server
10.10.1.203 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 10.10.1.203 portmap: server
10.10.1.203 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 10.10.1.203 not responding, timed out Root-NFS: Server
returned error -5 while mounting /home/michael/workdir/filesys
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or unknown-block(2,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(2,0)
Could you please help us to solve this problem?
** **
**Kim Klaiman**
**Firmware Engineer**
Bioscrypt Inc.
------------------------------------------------------------------------
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
