Hi, I definitely had video input connected on our board. I didn't really change the kernel code for vpfe, although I did have to integrate it in the kernel tree. Any idea where we should start looking?
Best regards, Sander -----Oorspronkelijk bericht----- Van: [EMAIL PROTECTED] namens Jerry Johns Verzonden: vr 23-2-2007 14:42 Aan: '[email protected]' Onderwerp: RE: davinci_vpfe blocks on ioctll(VIDIOC_DQBUF) Hey, This might sound silly, but do you have video input connected on your board (either through S-video -x option or through RCA) Without the video, the ISR will not trigger since no EAV,SAV codes are transmitted Also, if you have changed the kernel code for the VPFE, then that might be the case too Jerry -------------------------------------------------------- CONFIDENTIALITY NOTICE - This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify Sander Huijsen by telephone or [EMAIL PROTECTED] and delete the original transmission and its attachments without reading or saving in any manner. _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
