Hi,
Next week, our custom Davinci bread board will be in for me to start bringing
it up. The memory parts (NOR flash, DDR)
are different than those of the DVEVM. I plan to use the XDS510 or XDS560 JTAG
emulator to test those components
first to make sure they work. As for flashing the u-boot image, since the NOR
flash on our board is different than that
of the DVEVM, I can't use the FlashWriter (from Spectrum Digital) to program
the NOR flash. A TI tech gave me the
source code for the FlashWriter but said that the code is "poorly written" and
TI has no support for it so I'm on my own.
Well, in the past, we have use the Corelis boundary scan tool to directly
program the flash of most of our boards.
Has anyone try programming the flash on the DVEVM with a boundary scan tool
like Corelis or ASSET? This will be
a lot easier than having to deal with the FlashWriter code.
How do you think I should approach this in bringing our board and flashing
u-boot? Your advice is appreciated! Thanks!
Regards,
Andy
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
