Can you send the patch you applied to nand_davinci.c ? That will help to solve your problem
----- Original Message ---- From: Will Tucker <[EMAIL PROTECTED]> To: [email protected] Sent: Saturday, March 17, 2007 1:19:47 AM Subject: Booting and Running Kernel From NAND Flash Hi, I'm trying to load and run my kernel from NAND flash but I can't get it working. I've been following SPRAA0, and I put the patch in create to partitions in the NAND - mtd0 and mtd1, and I do the ftl_format /dev/mtd1 and nandwrite -p /dev/mtd0 uImage and it seems to write the image to NAND ok. Then when I reboot and follow step 8 which says to set bootcmd to 'nboot 0x80200000 0 104000' and the bootargs and autostart and then reboot again. When it boots up I get the following error: Loading from device 0: <NULL> at 0x2000000 (offset 0x104000) ** Bad Magic Number 0xffffffff ** I'm guessing the settings for nboot are wrong, that the wrong address is specified. Has anyone else encountered this problem? Or is there a different way I can load the kernel into NAND without booting the machinge using TFTP and NFS and then writing the NAND? Will T. Don't pick lemons. See all the new 2007 cars at Yahoo! Autos. _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source ____________________________________________________________________________________ We won't tell. Get more on shows you hate to love (and love to hate): Yahoo! TV's Guilty Pleasures list. http://tv.yahoo.com/collections/265
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
