Hi, I was wondering if anybody was able to plug 2 USB-Ethernet modules on the Davinci? I'm using the Montavista 2.6.10-mvl401 kernel.
I have applied the musb_host.c patch "http://www.mail-archive.com/[email protected]/msg01652.html";. Now I connected a usb 4 ports hub to the davinci with 2 usb-ethernet modules connected to the hub. The 2 other ports are not used. Here is what I get hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-1.4: new full speed USB device using musb_hdrc and address 3 drivers/usb/net/rtl8150.c: eth1: rtl8150 is detected usb 1-1.3: new high speed USB device using musb_hdrc and address 4 drivers/usb/net/rtl8150.c: eth2: rtl8150 is detected I am able to configure eth2 ifconfig eth1 192.168.1.108 But I am not able to configure eth1 this is what I get: ifconfig eth1 192.168.1.109 drivers/usb/net/rtl8150.c: rtl8150_open: intr_urb submit failed: -16 SIOCSIFFLAGS: Device or resource busy I have the same problem if I connect one usb ethernet and a usb mouse. _______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
