|
Hi all, I am using montavista kernel MVL401. When I give "reboot" command, it does not reset processor sometimes. It hangs after printing "Switching to init", & then does nothing till 15-20 seconds. If I give enter after that, then it resets the processor sometimes. In most of the cases, reboot command works fine. Has anybody faced this problem or does any one know what can be the wrong ? Thanks in advance, Sweta eInfochips Business Disclaimer: This message may contain confidential, proprietary or legally Privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, Disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by eInfochips Limited and/or eInfochips Inc("eInfochips") unless sent with that express intent and with due authority of eInfochips. eInfochips has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. |
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
