Hello all,
MontaVista User Guide specifies the following steps for using JFFS2: * MTD * Under Filesystems, enable the following options: * Journaling Flash File System v2 (JFFS2) support * JFFS debugging verbosity (0 = quiet, 3 = noisy) * JFFS2 Support for NAND chips (Only if your target supports NAND flash.) Note: The devices /dev/mtd0 and /dev/mtdblock0 are required for JFFS2 to work. These devices should be included automatically with the target LSPs that support the flash driver. Ensure that these devices are present. During boot-up of the kernel, the MTD driver prints whether the flash has been found or not. Also, after boot-up, the command cat /proc/mtd can be used to see the details of the MTD device and confirm that the driver is active. After enabling those options, I don't see any MTD messages during the reboot and there are no /dev/mtd* devices. I do see the message "JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.", but I'm using NOR flash currently. What am I missing? Thanks, Kim Klaiman Senior Embedded Software Engineer Bioscrypt Inc.
_______________________________________________ Davinci-linux-open-source mailing list [email protected] http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
