Hi all,
I am trying to bring up the following USB based Wireless Network Adapter.
1. Airlink AWLL3026 Wireles-G 54Mbps Ultra Slim USB 2.0 Adapter
2. TRENDnet TEW-429UB 54Mbps 802.11g Wireless USB 2.0 Adapter
Both of these cards are based on ZD1211 chipset based.
I am using 2.6.20 kernel and compiled the Zydas driver for it.
Firmware version I am using is - zd1211-firmware1.3.tar
The driver is able to detect the card and able to upload the firmware.
After that the very first USB Request to the the Bulk End point is timing
out.
Any clue on this as to what is going wrong?
The following is the output from the syslog
------------------------------------------------------
Jan 1 12:01:52 10 kernel: zd1211rw usb_init()
Jan 1 12:01:52 10 kernel: zd1211rw probe called
Jan 1 12:01:52 10 kernel: usb 1-1: print_id() 157e:300b v4802 high
Jan 1 12:01:52 10 kernel: Calling zd_usb_init()
Jan 1 12:01:52 10 kernel: zd1211rw 1-1:1.0: zd_netdev_alloc()
netdev->flags 0x1002
Jan 1 12:01:52 10 kernel: zd1211rw 1-1:1.0: zd_netdev_alloc()
netdev->features 0x00000000
Jan 1 12:01:52 10 kernel: usb 1-1: request_fw_file() fw name zd1211/zd1211_ub
Jan 1 12:01:53 10 kernel: usb 1-1: firmware version 0x4330 and
device bootcode version 0x4802 differ
Jan 1 12:01:53 10 kernel: usb 1-1: request_fw_file() fw name zd1211/zd1211_ur
Jan 1 12:01:54 10 kernel: usb 1-1: upload_code() transfer size 3584
-----------------
Jan 1 12:01:54 10 kernel: usb 1-1: upload_code() transfer size 64
Jan 1 12:01:54 10 kernel: usb 1-1: upload_code() firmware confirm
return value 0x01
Jan 1 12:01:54 10 kernel: usb 1-1: upload_code() transfer size 3720
------------------
Jan 1 12:01:54 10 kernel: usb 1-1: upload_code() transfer size 72
Jan 1 12:01:54 10 kernel: usb 1-1: upload_code() transfer size 8
Jan 1 12:01:54 10 kernel: usb 1-1: upload_code() firmware confirm
return value 0x01
Jan 1 12:01:54 10 kernel: usb 1-1: request_fw_file() fw name
zd1211/zd1211_uphr
Jan 1 12:01:55 10 kernel: usb 1-1: upload_code() transfer size 4096
-------------------------
Jan 1 12:01:55 10 kernel: usb 1-1: upload_code() transfer size 128
Jan 1 12:01:55 10 kernel: usb 1-1: upload_code() transfer size 64
Jan 1 12:01:55 10 kernel: usb 1-1: upload_code() firmware confirm
return value 0x01
Jan 1 12:01:55 10 kernel: zd1211rw 1-1:1.0: zd_usb_enable_int()
Jan 1 12:01:55 10 kernel: zd1211rw 1-1:1.0: zd_usb_enable_int()
submit urb c43b3980
Jan 1 12:01:55 10 kernel: zd1211rw 1-1:1.0: zd_chip_init_hw()
Jan 1 12:01:56 10 kernel: zd1211rw 1-1:1.0: zd_usb_ioread16v() error
in usb_bulk_msg(). Error number -110 (TIMEOUT)
Jan 1 12:01:56 10 kernel: zd1211rw 1-1:1.0: zd_ioread32v_locked()
error: zd_ioread16v_locked. Error number -110
Jan 1 12:01:56 10 kernel: zd1211rw 1-1:1.0: dump_cr() error reading
CR_AFTER_PNP. Error number -110
Jan 1 12:01:56 10 kernel: zd1211rw 1-1:1.0: zd_usb_disable_int() urb
c43b3980 killed
Jan 1 12:01:56 10 kernel: zd1211rw 1-1:1.0: probe() couldn't
initialize mac. Error number -110
Jan 1 12:01:56 10 kernel: usb 1-1: reset high speed USB device using
musb_hdrc and address 2
Jan 1 12:01:56 10 kernel: zd1211rw: probe of 1-1:1.0 failed with error -110
Jan 1 12:01:56 10 kernel: usbcore: registered new interface driver zd1211rw
Jan 1 12:01:56 10 kernel: zd1211rw initialized
Thanks
Nazim
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
