Hi,
I have a D-Link WLAN USB(DWL-G122 C1) and trying to set up WLAN in TI Davinci
system that uses Montavista Linx.
I encounter the following erros continously and endup restarting the system,
when I use the command:
[EMAIL PROTECTED]:~# modprobe rt73
rtusb init ====>
usbcore: registered new driver rt73
[EMAIL PROTECTED]:~# lsmod
Module Size Used by
rt73 250424 0
[EMAIL PROTECTED]:~# usb 1-1: new high speed USB device using musb_hdrc and
ad2idVendor = 0x7d1, idProduct = 0x3c03
[EMAIL PROTECTED]:~# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0E:99:02:55:B4
inet addr:192.168.0.103 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9659 errors:0 dropped:0 overruns:0 frame:0
TX packets:6720 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7070856 (6.7 MiB) TX bytes:1116025 (1.0 MiB)
Interrupt:13
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)
rausb0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
# ifconfig rausb0 inet 192.168.0.20 up
rt73 driver version - 1.0.4.0
usb 1-1: ifconfig timed out on ep0out
usb 1-1: rtusb-usbcmd timed out on ep0out
usb 1-1: rtusb-usbcmd timed out on ep0out
usb 1-1: rtusb-usbcmd timed out on ep0in
usb 1-1: rtusb-usbcmd timed out on ep0in
and goes on
Driver
[EMAIL PROTECTED]:~# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0E:99:02:55:B4
inet addr:192.168.0.103 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9659 errors:0 dropped:0 overruns:0 frame:0
TX packets:6720 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7070856 (6.7 MiB) TX bytes:1116025 (1.0 MiB)
Interrupt:13
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)
rausb0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Driver rt73 Version:
rt73 1.0.4
Hardware Description:
Device: Dlink DWL-G122 Ver:C1 F/W Ver:3.0
Chipset: Ralink USB
Kernel version:
Linux 2.6.10_mvl401-davinci_evm 18 Thu Aug 30 02:59:45 CST 2007 armv5tejl
GNU/Linux (patched to 1358)
The device and the driver works fine on my P.C -Linux Version: Linux h
2.6.9-42.ELsmp
Could someone help me on what could be the reason and what am supposed to do to
sort it out.
Thanks and Regards,
yanght
2007/9/3
全 国 万 名 职 场 女 性，齐 聚 非 常 美 女，惊 艳 2 0 0 7
_______________________________________________
Davinci-linux-open-source mailing list
[email protected]
http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
